N286-100G-SR4SJ - Uncategorized Tripp Lite - Free user manual and instructions
Find the device manual for free N286-100G-SR4SJ Tripp Lite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 100G QSFP28 Optical Transceiver Module |
| Model | N286-100G-SR4SJ |
| Brand | Tripp Lite |
| Data Rate | 100 Gbps |
| Fiber Type | Multimode (OM3/OM4) |
| Maximum Range | 100 m (OM3) / 150 m (OM4) |
| Optical Connector | Duplex LC |
| Number of Channels | 4 |
| Wavelength | 850 nm |
| Dimensions (L x W x H) | 72.4 x 18.4 x 8.5 mm |
| Weight | 50 g |
| Power Supply | 3.3 V (via host connector) |
| Power Consumption | ~3.5 W |
| Operating Temperature | 0 °C to 70 °C |
| Operating Humidity | 5% to 85% RH (non-condensing) |
| Standards | IEEE 802.3ba, MSA QSFP28, RoHS |
| Key Features | 100 Gigabit Ethernet transmission, low latency, integrated thermal management |
| Maintenance and Cleaning | Clean optical connectors with lint-free swabs and isopropyl alcohol |
| Safety | Class 1 laser: do not stare directly at the beam |
| Spare Parts and Repairability | Sealed product, not user-serviceable |
| General Information | Designed for data centers, high-speed switching and routing |
Frequently Asked Questions - N286-100G-SR4SJ Tripp Lite
How to install the N286-100G-SR4SJ module?
Insert the module into a compatible QSFP28 port until it clicks. Connect multimode fiber with LC connectors. Ensure the host equipment is powered off during insertion.
What type of fiber to use?
Use OM3 multimode fiber (range 100 m) or OM4 (range 150 m) with duplex LC connectors.
Is the module compatible with Cisco switches?
The module complies with the QSFP28 MSA standard, so it is compatible with any equipment supporting standard QSFP28 100GBASE-SR4 transceivers, including Cisco, Juniper, etc.
How to clean optical connectors?
Use a suitable cleaning kit: lint-free swab moistened with 99% isopropyl alcohol. Gently clean the connector surface before each connection.
What is the power consumption of the module?
Typical consumption is approximately 3.5 W during normal operation.
Does the module support DDM function?
Yes, the module supports Digital Diagnostic Monitoring (DDM) to monitor temperature, voltage, current, and optical power.
Can I use this module with a copper cable?
No, this module is designed for multimode fiber only. For copper connections, use a 100GBASE-CR4 transceiver with a DAC cable.
What to do if the module is not recognized?
Check that the host port is enabled and 100G compatible. Clean the connectors. Reboot the equipment. If the problem persists, test on another port.
What is the product warranty?
Tripp Lite offers a limited lifetime warranty. Check the official website for details.
Can I use this module with single-mode fiber?
No, this module is optimized for multimode fiber (850 nm). Use on single-mode fiber may damage the module or reduce performance.
User questions about N286-100G-SR4SJ Tripp Lite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual N286-100G-SR4SJ - Tripp Lite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. N286-100G-SR4SJ by Tripp Lite.
USER MANUAL N286-100G-SR4SJ Tripp Lite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tripp Lite
Model : N286-100G-SR4SJ
Category : Uncategorized