DAECPM200 - Water pump DAEWOO - Free user manual and instructions
Find the device manual for free DAECPM200 DAEWOO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Pump |
| Brand | Daewoo |
| Model | DAECPM200 |
| Power Source | AC mains |
| Power Consumption | 200 W |
| Voltage / Frequency | 220-240 V / 50 Hz |
| Max Flow Rate | 30 L/min |
| Max Head | 8 m |
| Inlet / Outlet Diameter | 1 inch (25 mm) |
| Cable Length | 1.5 m |
| Protection Class | IPX4 (splash-proof) |
| Material | Stainless steel and engineering plastic |
| Weight | 5.5 kg |
| Dimensions (L x W x H) | 25 x 15 x 20 cm |
| Noise Level | ≤ 70 dB |
| Operating Temperature | 0°C - 40°C |
| Features | Thermal overload protection, automatic shut-off on dry run |
| Maintenance | Regularly clean inlet filter; do not run dry |
| Safety | Use with residual current device (RCD); ensure proper grounding |
| Spare Parts | Impeller, seals, capacitors available from authorized service centers |
| Warranty | 2 years (subject to terms and conditions) |
Frequently Asked Questions - DAECPM200 DAEWOO
How do I start the Daewoo DAECPM200 water pump for the first time?
Ensure the pump is connected to a suitable power supply and that the inlet and outlet are properly connected. Fill the pump housing with water through the priming plug to avoid dry running. Switch on the power; the pump should start automatically.
What should I do if the pump does not start?
Check the power connection and fuse. Ensure the pump is primed (filled with water). If it still doesn't start, check for blocked impeller or faulty capacitor. Contact a qualified technician if needed.
Can the pump run dry?
No, running the pump dry will damage the seals and impeller. The pump has an automatic shut-off feature to prevent dry running, but always ensure sufficient water supply.
How often should I clean the pump?
Clean the inlet filter every month or more frequently if pumping dirty water. Inspect the impeller and housing for debris every 3 months.
What is the maximum water temperature the pump can handle?
The pump can handle water temperatures up to 40°C (104°F). Do not use with hot water.
The pump is noisy. What could be the cause?
Noise can be due to cavitation (low water level), air trapped, or loose mounting. Check water level, bleed air from the system, and ensure the pump is securely mounted.
What is the maximum suction lift?
The maximum suction lift is 8 meters. Ensure the suction pipe is airtight and not longer than necessary.
Can I use the pump for saltwater or chemicals?
No, this pump is designed for clean freshwater only. Using it with saltwater or chemicals will corrode internal parts and void the warranty.
How do I store the pump when not in use?
Drain all water from the pump and pipes. Clean the pump and store it in a dry, frost-free place. Protect from dust and moisture.
Where can I get spare parts for the DAECPM200?
Spare parts are available at authorized Daewoo service centers. Contact your local dealer or visit the official website for parts and service.
User questions about DAECPM200 DAEWOO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual DAECPM200 - DAEWOO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DAECPM200 by DAEWOO.
USER MANUAL DAECPM200 DAEWOO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DAEWOO
Model : DAECPM200
Category : Water pump