CSA-PWS10S-HUB-ENET - Uncategorized Crestron - Free user manual and instructions
Find the device manual for free CSA-PWS10S-HUB-ENET Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power Supply System |
| Brand | Crestron |
| Model | CSA-PWS10S-HUB-ENET |
| Input Voltage | 100-240V AC, 50/60 Hz |
| Output Voltage | 24V DC |
| Number of Outputs | 10 |
| Power Output per Channel | Up to 2.5A |
| Total Power | 250W |
| Dimensions (H x W x D) | 1.75 x 19 x 12 inches (1U rack mount) |
| Weight | 5.5 lbs (2.5 kg) |
| Ethernet Connectivity | 10/100 Mbps for remote monitoring |
| Hub Functionality | Integrated hub for centralized power distribution |
| Cooling | Fanless, convection cooled |
| Protection Features | Overload, short circuit, overvoltage |
| LED Indicators | Power status for each output |
| Mounting | Rack mountable with included brackets |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Maintenance | Clean with dry cloth; inspect connections periodically |
| Safety Compliance | UL, CE, RoHS |
| Warranty | 3 years limited |
Frequently Asked Questions - CSA-PWS10S-HUB-ENET Crestron
What devices can be powered by the CSA-PWS10S-HUB-ENET?
This power supply is designed to power Crestron control systems, touch panels, and other 24V DC devices. It provides 10 individually protected outputs.
How do I install the unit in a rack?
Use the included rack ears to mount the unit in a standard 19-inch rack. Secure with screws and ensure proper ventilation. Connect input power and attach devices to the outputs.
Can I monitor the power status remotely?
Yes, the Ethernet port allows remote monitoring via Crestron Toolbox or other management software. You can check voltage, current, and fault status.
What is the maximum current per output?
Each output can deliver up to 2.5A at 24V DC. The total combined output should not exceed 250W.
Does the unit have overcurrent protection?
Yes, each output has individual overcurrent protection. If a fault occurs, the affected channel will shut down without affecting others.
What type of input power cord is required?
A standard IEC C14 to C13 power cord is needed. The unit accepts 100-240V AC, 50/60 Hz.
How do I reset a tripped output?
After removing the fault, power cycle the unit by disconnecting and reconnecting the input power. The outputs will automatically reset.
Can the unit be used with PoE devices?
No, this unit provides 24V DC power, not PoE. For PoE devices, use a separate PoE injector or switch.
Is the power supply fanless?
Yes, it is fanless and relies on convection cooling. Ensure at least 1U space above and below for airflow.
What should I do if an output LED is off?
Check if the connected device is drawing excessive current or shorted. Try a different output. If the LED remains off, contact Crestron support.
User questions about CSA-PWS10S-HUB-ENET Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual CSA-PWS10S-HUB-ENET - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CSA-PWS10S-HUB-ENET by Crestron.
USER MANUAL CSA-PWS10S-HUB-ENET Crestron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Crestron
Model : CSA-PWS10S-HUB-ENET
Category : Uncategorized