M315.004 - Uncategorized DEDRA - Free user manual and instructions
Find the device manual for free M315.004 DEDRA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Drill |
| Brand | DEDRA |
| Model | M315.004 |
| Power Supply | 230V AC, 50Hz |
| Input Power | 1200 W |
| No-Load Speed | 0-3000 rpm |
| Max Drilling Capacity (Steel) | 13 mm |
| Max Drilling Capacity (Wood) | 40 mm |
| Max Drilling Capacity (Concrete) | 18 mm |
| Chuck Type | Keyless |
| Chuck Size | 1.5-13 mm |
| Speed Settings | Variable speed trigger |
| Rotation Direction | Forward/Reverse |
| Impact Mode | Yes, for hammer drilling |
| Weight | 1.8 kg |
| Dimensions (L x W x H) | 280 x 200 x 80 mm |
| Protection Class | Class II (Double insulated) |
| Cable Length | 2.5 m |
| Accessories Included | Drill bit set, depth stop, side handle, carrying case |
| Repairability | Replaceable carbon brushes, spare parts available |
| Maintenance | Clean vents regularly, lubricate chuck occasionally |
| Safety Features | Lock-on button, safety clutch, anti-vibration handle |
Frequently Asked Questions - M315.004 DEDRA
How do I change the drill bit?
To change the drill bit, open the keyless chuck by turning it counterclockwise. Insert the new bit and tighten clockwise by hand. Ensure it is centered and secure before use.
What is the maximum drilling capacity in concrete?
The DEDRA M315.004 can drill up to 18 mm in concrete using the hammer mode and suitable masonry bits.
How do I activate the reverse rotation?
The reverse rotation is activated by a switch located near the trigger. Slide it to the left for reverse and to the right for forward. Always wait until the drill stops before switching direction.
What type of power supply does it require?
The drill requires a 230V AC power source with a frequency of 50 Hz. It is double insulated and does not require a grounding connection.
How do I clean and maintain the drill?
Regularly clean the ventilation slots with a soft brush to prevent dust buildup. Wipe the housing with a damp cloth. Lubricate the chuck with a few drops of oil occasionally. Store in a dry place.
Can I use the drill for screwdriving?
Yes, the variable speed trigger and forward/reverse function make it suitable for screwdriving. Adjust the torque by selecting the appropriate speed setting (low speed for high torque).
What safety precautions should I take?
Always wear safety goggles and hearing protection. Secure the workpiece with clamps. Keep the cord away from the drilling area. Disconnect the power when changing accessories or performing maintenance.
How do I replace the carbon brushes?
The brushes are accessible via caps on the motor housing. Unscrew the caps, remove the worn brushes, and insert new ones. Ensure they are properly seated and reassemble. Use only genuine DEDRA brushes.
Why does the drill stop suddenly during use?
This could be due to the overload protection activating. Let the tool cool down for a few minutes. Check for blocked vents or excessive pressure. Also inspect the power cord for damage.
Where can I get spare parts?
Spare parts such as carbon brushes, chucks, switches, and gears are available from authorized DEDRA service centers or online retailers. Check your manual for part numbers.
User questions about M315.004 DEDRA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual M315.004 - DEDRA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M315.004 by DEDRA.
USER MANUAL M315.004 DEDRA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DEDRA
Model : M315.004
Category : Uncategorized