N286-25G-SRS-G - Uncategorized Tripp Lite - Free user manual and instructions
Find the device manual for free N286-25G-SRS-G Tripp Lite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | SFP28 25G Transceiver |
| Brand | Tripp Lite |
| Model | N286-25G-SRS-G |
| Dimensions (L x W x H) | 56.5 x 13.4 x 8.5 mm (SFP28 standard) |
| Weight | 30 g |
| Data Rate | 25 Gbps |
| Fiber Type | Multimode (MMF) OM3/OM4 |
| Maximum Range | 100 m (on OM4) |
| Optical Connector | Duplex LC |
| Wavelength | 850 nm |
| Power Supply | 3.3 V (via SFP28 interface) |
| Power Consumption | Less than 1 W |
| Operating Temperature | 0 °C to 70 °C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Key Features | 25 Gigabit Ethernet network connectivity, short-range fiber optic link, SFP28 compatible, hot-pluggable |
| Maintenance and Cleaning | Clean connectors with a fiber optic cleaning kit or a lint-free cloth dampened with isopropyl alcohol |
| Safety | Do not look directly into the optical port; Class 1 laser |
| Spare Parts and Repairability | Not user-serviceable; replace the entire transceiver in case of failure |
| General Information | Tripp Lite limited lifetime warranty; compatible with 25G SFP28 network equipment |
Frequently Asked Questions - N286-25G-SRS-G Tripp Lite
What type of connector does the N286-25G-SRS-G use?
It uses a Duplex LC optical connector for multimode fiber.
What is the maximum range of this transceiver?
The maximum range is 100 meters on OM4 multimode fiber, and approximately 70 meters on OM3.
Is it compatible with 10G switches?
No, this transceiver is designed for 25 Gigabit Ethernet. It will not work at 10 Gbps, even if some 25G switches can support lower speeds.
What power supply is needed?
Power is supplied by the host port via 3.3 V, no external source is required.
Can I use this module with a copper cable?
No, the N286-25G-SRS-G is an optical transceiver for multimode fiber. For copper, a 25G SFP28 module with an RJ45 interface would be needed.
What is the typical power consumption?
Consumption is less than 1 watt, making it a very energy-efficient module.
How to clean optical connectors?
Use a fiber optic cleaning kit or a lint-free cloth dampened with isopropyl alcohol. Avoid any contact with fingers.
Is this module hot-pluggable?
Yes, it supports hot-plug, you can insert or remove it without powering off the equipment.
What is the operating temperature?
The operating temperature is between 0 °C and 70 °C.
What to do if the transceiver does not work?
First check compatibility with your equipment, clean the connectors, and ensure the fiber is in good condition. If the problem persists, contact Tripp Lite support for a replacement under warranty.
User questions about N286-25G-SRS-G Tripp Lite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual N286-25G-SRS-G - Tripp Lite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. N286-25G-SRS-G by Tripp Lite.
USER MANUAL N286-25G-SRS-G Tripp Lite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tripp Lite
Model : N286-25G-SRS-G
Category : Uncategorized