UNO-348 - Industrial computer Advantech - Free user manual and instructions
Find the device manual for free UNO-348 Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Automation / Embedded PC |
| Brand | Advantech |
| Model | UNO-348 |
| Dimensions (L x W x H) | 195 x 140 x 60 mm |
| Weight | 1.5 kg |
| Power Supply | 12-24 V DC |
| Power Consumption | 15 W (typical) |
| Processor | Intel Atom E3845 (quad-core, 1.91 GHz) |
| RAM Memory | 4 GB DDR3L |
| Storage | 32 GB SSD (mSATA) |
| Operating System | Windows 10 IoT Enterprise or Linux |
| Network Interfaces | 2 x Gigabit Ethernet (RJ-45) |
| USB Ports | 2 x USB 2.0, 2 x USB 3.0 |
| Serial Ports | 2 x RS-232/422/485 |
| Operating Temperature | -20 °C to 70 °C |
| Protection Rating | IP40 (enclosure) |
| Main Functions | Industrial control, data acquisition, communication, automation |
| Maintenance and Cleaning | Regular dusting with a dry cloth; avoid moisture and liquids |
| Safety | Grounding the device; surge protection; use in a dry environment |
| Spare Parts and Repairability | Contact Advantech after-sales service for parts and repairs |
| General Information | Manual available in PDF on the manufacturer's website |
Frequently Asked Questions - UNO-348 Advantech
How to connect the Advantech UNO-348 to an Ethernet network?
Plug an RJ-45 Ethernet cable into one of the two Gigabit Ethernet ports on the UNO-348. The device configured in DHCP will automatically obtain an IP address. You can also configure a static IP via the operating system.
Which operating systems are supported by the UNO-348?
The UNO-348 supports Windows 10 IoT Enterprise and certain Linux distributions (such as Ubuntu). The operating system is pre-installed according to the purchased configuration.
How to power the Advantech UNO-348?
Use an external power supply 12-24 V DC (direct current) with the provided screw connector. Observe the polarity indicated on the housing. The power cord is not included.
Is the UNO-348 suitable for outdoor use?
No, the UNO-348 is designed for indoor use (IP40). It is dust resistant but not waterproof. The operating temperature is -20 °C to 70 °C.
How to reset the factory settings of the UNO-348?
The procedure depends on the operating system. On Windows, use the built-in recovery utility. On Linux, you can reinstall the system from an image provided by Advantech. Refer to the manual for detailed steps.
What types of devices can be connected to the serial ports?
The RS-232/422/485 serial ports allow connection of programmable logic controllers, variable frequency drives, barcode readers, scales, or any other industrial equipment using serial communication.
Can the memory of the UNO-348 be expanded?
Yes, the UNO-348 has a SO-DIMM slot for DDR3L memory. You can replace the 4 GB module with a maximum of 8 GB. Consult the manual for compatibility.
How to clean the Advantech UNO-348?
Unplug the device before any cleaning. Use a soft, dry cloth to remove dust from the housing. Never use liquid or abrasive products. For internal cleaning, contact a professional.
What to do if the UNO-348 does not turn on?
First check that the power supply is connected and the voltage is correct (12-24 V DC). Try another power cable. If the problem persists, contact Advantech technical support.
Where to download the drivers and manual for the UNO-348?
Go to the official Advantech website (www.advantech.com) in the support section. Search for the UNO-348 model to access drivers, diagrams, and user manuals.
User questions about UNO-348 Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Industrial computer in PDF format for free! Find your manual UNO-348 - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UNO-348 by Advantech.