Incasso Base Slim 70 X - Basket Seenergy - Free user manual and instructions
Find the device manual for free Incasso Base Slim 70 X Seenergy in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Built-in hood |
| Brand | Seenergy |
| Model | Incasso Base Slim 70 X |
| Width | 70 cm |
| Height (slim) | 15 cm |
| Depth | 30 cm |
| Weight | 10 kg |
| Power supply | 230 V ~ 50 Hz |
| Power consumption | 150 W |
| Motor power | 200 W |
| Suction capacity | 650 m³/h |
| Noise level | 55 dB (max speed) |
| Number of speeds | 3 |
| Lighting type | LED (2 x 1.5 W) |
| Filter type | Aluminum grease filters (washable) |
| Control type | Electronic touch panel |
| Installation type | Built-in (under cabinet) |
| Material | Stainless steel |
| Energy class | A |
| Warranty | 2 years |
Frequently Asked Questions - Incasso Base Slim 70 X Seenergy
How do I install the Incasso Base Slim 70 X?
Ensure the cabinet cutout is 70 cm wide. Connect the ducting for exhaust mode or activate recirculation with carbon filters. Secure the hood using the provided screws and connect to mains power.
How often should I clean the grease filters?
Clean the aluminum grease filters every 2 months or more frequently if used heavily. Soak in warm soapy water or run in the dishwasher (low temperature). Dry thoroughly before reinstalling.
How do I replace the carbon filter?
If using recirculation mode, replace the carbon filter every 3-6 months. Open the filter cover, remove the old filter, and insert a new one. Ensure the filter is properly seated.
How do I adjust the fan speed?
Use the touch control panel to select among 3 speeds. Press the speed button to cycle through low, medium, and high. The corresponding indicator will light up.
What should I do if the motor stops working?
Check if the power cord is connected and the circuit breaker hasn't tripped. If the motor still doesn't run, contact customer support or an authorized technician.
How do I eliminate odors effectively?
Use high speed when cooking strong-smelling foods. Ensure the carbon filter is fresh if in recirculation mode. Clean grease filters regularly to maintain airflow.
Can I use the hood without external ducting?
Yes, the hood can be used in recirculation mode. Install carbon filters to trap odors, and the air will be released back into the kitchen.
What type of light bulb does it use?
The hood uses integrated LED modules (2 x 1.5 W). Non-replaceable; if faulty, contact service for replacement.
How do I reset the hood after a power cut?
After a power cut, the hood may need reactivation. Press and hold the power button for 3 seconds until the control panel lights up. Then adjust settings as needed.
Where can I buy spare parts?
Spare parts like filters and LED modules are available from the Seenergy official website or authorized dealers. Use the model number Incasso Base Slim 70 X when ordering.
User questions about Incasso Base Slim 70 X Seenergy
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual Incasso Base Slim 70 X - Seenergy and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Incasso Base Slim 70 X by Seenergy.
USER MANUAL Incasso Base Slim 70 X Seenergy
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Seenergy
Model : Incasso Base Slim 70 X
Category : Basket