TI-S - Uncategorized OPTEX - Free user manual and instructions
Find the device manual for free TI-S OPTEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Indoor PIR Motion Sensor |
| Brand | Optex |
| Model | TI-S |
| Dimensions | 110 x 60 x 45 mm (approx.) |
| Weight | 120 g (approx.) |
| Power Supply | 9–16 VDC, 12 VDC typical |
| Current Consumption | 25 mA (typical) |
| Detection Method | Passive Infrared (PIR) |
| Detection Range | 12 m x 12 m (90°) |
| Mounting Height | 2.0–2.5 m |
| Alarm Output | NC (Normally Closed) relay, 28 VDC 0.2 A max |
| Tamper Protection | Yes, cover tamper switch |
| Operating Temperature | -10°C to +50°C |
| Humidity | Up to 95% RH non-condensing |
| Material | ABS plastic (white) |
| LED Indicator | Red LED for alarm and walk test |
| Compliance | CE, FCC |
| Included Accessories | Mounting bracket, screws, and manual |
| Warranty | 2 years |
Frequently Asked Questions - TI-S OPTEX
What is the detection range of the Optex TI-S?
The Optex TI-S has a detection range of up to 12 meters with a 90° coverage pattern.
How do I install the TI-S motion sensor?
Mount the sensor at a height of 2.0–2.5 meters on a wall or ceiling, connect the power supply (9–16 VDC) and alarm output to your control panel, and perform a walk test.
What power supply is required for the TI-S?
The sensor operates on 9–16 VDC (12 VDC typical) with a current consumption of 25 mA. Use a regulated power supply.
Does the TI-S have tamper protection?
Yes, it includes a cover tamper switch that activates if the housing is opened.
Can the TI-S be used outdoors?
No, the TI-S is designed for indoor use only. Outdoor installation may cause false alarms or damage.
How do I clean the TI-S sensor?
Use a soft, dry cloth to gently wipe the lens and housing. Do not use water or cleaning agents.
What does the red LED on the TI-S indicate?
The red LED lights up for 2 seconds when motion is detected during walk test mode. In normal operation, the LED can be disabled via jumper.
How do I connect the TI-S to my alarm panel?
Connect the NC (normally closed) relay output to a zone input on your alarm panel. Use 4-conductor cable for power and signal.
What is the operating temperature range?
The sensor works in temperatures from -10°C to +50°C.
Are replacement parts available for the TI-S?
Yes, mounting brackets and screws are available as spare parts. Contact Optex support or authorized dealers.
User questions about TI-S OPTEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual TI-S - OPTEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TI-S by OPTEX.
USER MANUAL TI-S OPTEX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : OPTEX
Model : TI-S
Category : Uncategorized