SHLF 2000 D2 - Uncategorized SILVERCREST - Free user manual and instructions
Find the device manual for free SHLF 2000 D2 SILVERCREST in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fan Heater |
| Model Number | SHLF 2000 D2 |
| Brand | SilverCrest |
| Power Output | 2000 W |
| Heating Settings | 2 power levels (1000 W / 2000 W) |
| Fan Mode | Cold air fan (no heat) |
| Thermostat | Adjustable thermostat with frost protection |
| Oscillation | Yes, wide-angle oscillation |
| Safety Features | Overheat protection, tip-over switch |
| Housing Material | Heat-resistant plastic |
| Dimensions (W x H x D) | Approx. 22 x 26 x 13 cm |
| Weight | Approx. 1.5 kg |
| Power Cord Length | Approx. 1.5 m |
| Voltage | 220–240 V ~ 50/60 Hz |
| Noise Level | Approx. 45 dB |
| Cleaning | Wipe with a dry cloth; do not use water |
| Filter | Removable dust filter (washable) |
| Certifications | CE, GS (TÜV/Intertek) |
| Included Accessories | Instruction manual |
Frequently Asked Questions - SHLF 2000 D2 SILVERCREST
How do I change the power setting?
Turn the power selector dial to choose between 1000 W (low) and 2000 W (high). For cool air, select the fan-only position.
Does the heater have a tip-over switch?
Yes, the tip-over switch automatically turns off the heater if it is knocked over to prevent fire hazards.
Can I use the heater in a bathroom?
This heater is not rated for bathroom use due to splash water risk. Use only in dry indoor areas.
How often should I clean the filter?
Clean the dust filter every 2–4 weeks depending on usage. Remove the filter and rinse it under water, then let it dry completely before reinserting.
Why is the heater not turning on?
Check that the power cord is plugged in, the main switch is on, and the thermostat is set above room temperature. Also ensure the tip-over switch is not triggered.
What is the noise level of this heater?
The noise level is approximately 45 dB, which is comparable to a quiet conversation or a refrigerator hum.
Is the heater suitable for large rooms?
With a 2000 W output, it can heat rooms up to about 20–25 m² when well insulated. For larger spaces, consider additional heating.
How do I store the heater when not in use?
Allow the heater to cool down completely, then clean the filter and store it in a dry, dust-free place. Keep the power cord loosely wrapped.
Does the heater have a frost protection function?
Yes, set the thermostat to the frost protection symbol (usually a snowflake) to maintain a minimum temperature of about 5°C to prevent freezing.
Can I use an extension cord with this heater?
It is not recommended to use an extension cord, as it may overheat. Plug directly into a wall outlet rated for at least 2000 W.
User questions about SHLF 2000 D2 SILVERCREST
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SHLF 2000 D2 - SILVERCREST and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SHLF 2000 D2 by SILVERCREST.
USER MANUAL SHLF 2000 D2 SILVERCREST
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SILVERCREST
Model : SHLF 2000 D2
Category : Uncategorized