DFG 50K - Measuring equipment PCE Instruments - Free user manual and instructions
Find the device manual for free DFG 50K PCE Instruments in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Force Gauge |
| Model | DFG 50K |
| Brand | PCE Instruments |
| Measurement Capacity | 50 kg (490 N) |
| Resolution | 0.01 kg (0.1 N) |
| Accuracy | ±0.5% of full scale |
| Display | Backlit LCD, 5 digits |
| Units | kg, N, lb, oz |
| Sampling Rate | 100 Hz |
| Functions | Peak hold, real-time, tare, auto power-off, low battery indicator |
| Overload Protection | 120% of capacity |
| Power Supply | Rechargeable Li-ion battery (3.7V, 1000mAh) or USB power |
| Battery Life | Approx. 10 hours continuous use |
| Dimensions (HxWxD) | 180 x 70 x 35 mm |
| Weight | Approx. 300 g |
| Material | Aluminum housing, stainless steel hook |
| Interface | USB-C for data transfer and charging |
| Data Output | RS-232 (optional), USB |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -10°C to 60°C (14°F to 140°F) |
| Cleaning | Wipe with a dry, soft cloth. Do not use solvents. |
| Spare Parts/Repairability | Battery, hook, and USB cable are replaceable. Contact PCE support for repairs. |
| Safety | Do not exceed capacity. Use only for tension/compression measurement. Keep away from moisture. |
| Included Accessories | Hook, USB cable, user manual, carrying case |
Frequently Asked Questions - DFG 50K PCE Instruments
How do I calibrate the DFG 50K force gauge?
To calibrate, apply a known weight (e.g., 10 kg) and use the calibration menu. Refer to the manual for step-by-step instructions. Always calibrate with certified weights for accuracy.
Can I change the measurement units?
Yes, press the UNIT button to cycle between kg, N, lb, and oz. The selected unit appears on the display.
How long does the battery last and how do I charge it?
The built-in Li-ion battery lasts about 10 hours. Charge via the USB-C port using a standard 5V charger. The battery indicator shows charging status.
What does 'peak hold' do?
Peak hold captures and displays the maximum force measured during a test. It is useful for measuring pull-off forces or break points.
How do I perform a tare (zero) adjustment?
With no load, press the TARE button to set the display to zero. This compensates for the weight of attached hooks or fixtures.
What is the overload capacity?
The gauge can withstand up to 120% of its capacity (60 kg) without permanent damage. Exceeding this may damage the sensor.
Can I connect the gauge to a computer?
Yes, via USB-C (or optional RS-232). Use the included software for data logging and real-time graphs.
How do I clean and maintain the gauge?
Wipe the exterior with a dry, lint-free cloth. Do not use water, solvents, or abrasives. Store in the included case when not in use.
What accessories are available?
Additional hooks, compression plates, carrying cases, and USB cables are available from PCE Instruments. Contact support for specific needs.
Why does the display show 'Err' or 'OL'?
'Err' indicates a calibration error or sensor fault. 'OL' means overload. Remove load immediately and check the applied force. If persistent, contact support.
User questions about DFG 50K PCE Instruments
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual DFG 50K - PCE Instruments and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DFG 50K by PCE Instruments.
USER MANUAL DFG 50K PCE Instruments
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PCE Instruments
Model : DFG 50K
Category : Measuring equipment