SlimPAR T6BT ILS - Lamp Chauvet - Free user manual and instructions
Find the device manual for free SlimPAR T6BT ILS Chauvet in PDF.
| Product Type | LED PAR Can |
| Model | SlimPAR T6BT ILS |
| Light Source | 6 x 8W Quad-Color LEDs (RGBA) |
| Battery | Rechargeable lithium-ion, up to 30 hrs runtime |
| Power Supply | 100-240 VAC, 50/60 Hz (auto-ranging) |
| Power Consumption | 48W max |
| Dimensions (L x W x H) | 7.5 x 6.3 x 8.3 in (191 x 160 x 211 mm) |
| Weight | 2.9 lb (1.3 kg) |
| Control Protocols | DMX (3/5-pin), ILS, Bluetooth (via app) |
| DMX Channels | 4, 6, or 10 selectable |
| Bluetooth Range | Up to 30 m (100 ft) line-of-sight |
| Mounting Options | Floor stand, truss clamp, or hanging bracket |
| IP Rating | IP20 (indoor use only) |
| Cooling System | Passive convection (no fan) |
| Maintenance | Clean exterior with dry cloth; do not use solvents |
| Safety Precautions | Do not open housing; use only provided power cord; avoid moisture |
| Included Accessories | Power cord, gel frame holder, mounting bracket |
Frequently Asked Questions - SlimPAR T6BT ILS Chauvet
User questions about SlimPAR T6BT ILS Chauvet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Lamp in PDF format for free! Find your manual SlimPAR T6BT ILS - Chauvet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SlimPAR T6BT ILS by Chauvet.
USER MANUAL SlimPAR T6BT ILS Chauvet
Scan the QR code to access the product page, warranty terms, and the complete User Manual

Intentionally Left Blank Page
Safety Notes
These Safety Notes include important information about installation, use, and maintenance of the SlimPAR T6BT ILS.
■ ALWAYS:

◆ Connect to a grounded circuit.
◆ Connect to operating voltages as specified on the product's spec sticker.
♦ Disconnect from power before replacing the fuse.
♦ Disconnect from its power source during periods of inactivity.
◆ Use a safety cable when suspending overhead.
- Heed all restrictions and warnings on the spec sticker.
◆ Mount in a location with at least 20 in (50 cm) of ventilation.
♦ Replace the fuse with the same type and rating.
Use a clamp with a captive bolt when a single hanging bracket is used.
■ In the event of a serious operating problem, stop using immediately.
■ DO NOT:
◆ Open this product or attempt any repairs. It contains no user-serviceable parts.
◆ Look at the light source when the product is on.
◆ Use if the power cord is crimped or damaged.
♦ Disconnect by pulling on the power cord.
♦ Allow flammable materials close to the product when it is operating.
♦ Touch the housing when it is on.
◆ Block any ventilation holes/slots in the housing.
◆ Connect to a dimmer or rheostat.
♦ Carry the product by its power cord.
♦ Operate in temperatures higher than 104°F (40°C).
♦ Expose to environments that exceed the Ingress Protection (IP) rating.
♦ Expose to rain or moisture.
Use outdoors.
Submerge.
Leave outdoors for extended periods of time.
♦ Set this product on a flammable surface.
♦ Expose to corrosive environmental conditions such as temperature, humidity, salinity, pressure, radiation, or shock.
FCC Statement of Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:
-
This device may not cause harmful interference, and
-
This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
◆ Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
◆ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
What is Included
♦ SlimPAR T6BT ILS
Power cable
◆ Quick Reference Guide
Battery Charge Notes
Rechargeable lithium-ion batteries are potentially hazardous and can present a serious FIRE HAZARD, SERIOUS INJURY and/or PROPERTY DAMAGE if damaged, defective, or improperly used.
■ ALWAYS:
◆ Charge using a manufacturer-provided charger while the product is powered off.
◆ Charge the battery in temperatures between 32°-95°F (0°-35°C).
Allow a depleted battery to charge for a few minutes before turning on the product. If the battery is completely discharged, the device cannot be turned on immediately when the charger is connected.
♦ Keep at least 3 ft (1 m) distance to any heat source and away from flammable materials.
- Keep the lid of any charging case open while charging.
◆ Keep batteries away from children.
◆ Store batteries between 40-60% charge.
◆ Follow local regulations when disposing of batteries.
◆ Replace with an authentic Chauvet battery.

■ DO NOT:
◆ Continue charging if the battery becomes hot, smokes, swells, or gives off an odor during charging.
Leave the product unattended while charging.
◆ Deplete the battery below 10%.
◆ Charge the battery in a closed container.
◆ Charge for more than 24 hours.
Control Panel Description
Button Function
| Exits from the current menu or function | |
| Navigates upwards through the menu list and increases the numeric value when in a function | |
| Navigates downwards through the menu list and decreases the numeric value when in a function | |
| Enables the currently displayed menu or sets the currently selected value into the selected function |
ILS Connection
The SlimPAR T6BT ILS uses the DMX data connection and the D-Fi USB for wireless connection to the Integrated Lighting System (ILS) ecosystem (patent pending). For more information about configuring the SlimPAR T6BT ILS into ILS mode, please refer to the User Manual available at www.chauvetdj.com.
Notas de seguridad
Intentionally Left Blank Page
Contact Us
General Information Technical Support
Chauvet World Headquarters
Address: 3360 Davie Rd., Suite 509 Voice: (844) 393-7575
Davie, FL 33314 Fax: (954) 756-8015
Voice: (954) 577-4455 Email: chauvetcs@chauvetlighting.com
Fax: (954) 929-5560
Toll Free: (800) 762-1084 Website: www.chauvetdj.com
Chauvet U.K.
Address: Pod 1 EVO Park Email: UKtech@chauvetlighting.eu
Little Oak Drive, Sherwood Park
Nottinghamshire, NG15 0EB Website: www.chauvetdj.eu
UK
Voice: +44 (0) 1773 511115
Fax: +44 (0) 1773 511110
Chauvet Benelux
Address: Stokstraat 18 Email: BNLtech@chauvetlighting.eu
9770 Kruishoutem
Belgium Website: www.chauvetdj.eu
Voice: +32 9 388 93 97
Chauvet France
Address: 3, Rue Ampère Email: FRtech@chauvetlighting.fr
91380 Chilly-Mazarin
France Website: www.chauvetdj.eu
Voice: +33 1 78 85 33 59
Chauvet Germany
Address: Bruno-Bürgel-Str. 11 Email: DEtech@chauvetlighting.de
28759 Bremen
Germany Website: www.chauvetdj.eu
Voice: +49 421 62 60 20
Chauvet Mexico
(Entrance by Calle 2)
Zona Industrial Lerma
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U.K., Ireland, Mexico, France, Germany, or Benelux, contact the dealer of record.
SlimPAR T6BT ILS QRG ML6 Rev. 1
© Copyright 2024 Chauvet
All rights reserved

Bluetooth®

UK CAC

RoHS

