STN-SP16 - Uncategorized STANLEY - Free user manual and instructions
Find the device manual for free STN-SP16 STANLEY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Electric Staple Gun |
| Brand | Stanley |
| Model | STN-SP16 |
| Main Use | Fastening of wood, plastic or fabric items |
| Power Source | 18 V lithium-ion battery (not included) |
| Staple Type | 16 mm staples, 10 mm width |
| Magazine Capacity | Up to 100 staples |
| Dimensions (L x W x H) | 250 x 60 x 180 mm |
| Weight | 1.2 kg (without battery) |
| Housing Material | Reinforced plastic and metal |
| Main Functions | Sequential and bump fire, depth adjustment, safety lock |
| Maintenance and Cleaning | Clean with a dry cloth, lubricate moving parts if necessary |
| Safety | Anti-accidental start safety lock, tip safety contact |
| Spare Parts and Repairability | Parts available on Stanley website, repairability index 8.0/10 |
| General Information | Indoor use only, operating temperature 0-40°C |
Frequently Asked Questions - STN-SP16 STANLEY
What type of staples should I use with the STN-SP16?
Use 16 mm staples with 10 mm width. The staples must comply with current standards to avoid any malfunction.
How to charge the battery?
The battery is recharged via the dedicated charger (not included). Plug the charger into a power outlet, insert the battery and wait until the indicator turns green. Allow approximately 1 hour.
What if a staple jams?
Disconnect the battery, open the staple compartment and carefully remove the jammed staple with pliers. Check that the guide rail is not obstructed.
How to adjust the driving depth?
Turn the adjustment knob located near the trigger. A deeper setting is suitable for hard materials, a shallower setting for soft materials.
Can the tool work without a battery?
No, the STN-SP16 is a cordless electric model. It requires an 18 V lithium-ion battery to operate.
What is the warranty on the product?
The manufacturer's warranty is 2 years from the date of purchase. Keep the receipt as proof.
Can I use the stapler on metal?
No, this tool is intended for soft materials such as wood, plastic or fabrics. Metal could damage the tool or cause ricochets.
How to clean the stapler?
Clean the exterior with a dry, lint-free cloth. For internal parts, use a compressed air blower. Do not use solvents.
What if the tool does not fire?
Check that the battery is charged and properly inserted. Make sure that the magazine contains staples and that the safety lock is disengaged.
Where to find spare parts?
Spare parts are available on the official Stanley website or from authorized dealers. Mention the model STN-SP16 when ordering.
User questions about STN-SP16 STANLEY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual STN-SP16 - STANLEY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. STN-SP16 by STANLEY.
USER MANUAL STN-SP16 STANLEY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STANLEY
Model : STN-SP16
Category : Uncategorized