GX-F12A-P - Switch PANASONIC - Free user manual and instructions
Find the device manual for free GX-F12A-P PANASONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Inductive Proximity Sensor (Switch) |
| Series | Panasonic GX |
| Model Number | GX-F12A-P |
| Dimensions (W x H x D) | 12 mm x 20 mm x 8 mm (approx.) |
| Weight | Approx. 15 g |
| Housing Material | Metal (brass/nickel-plated) |
| Supply Voltage | 12–24 V DC |
| Output Type | PNP (positive switching) normally open |
| Maximum Output Current | 100 mA |
| Sensing Distance (nominal) | 2 mm (flushed mount) |
| Operating Frequency | 1 kHz |
| Electrical Connection | Pre-wired cable, 2 m length |
| Operating Temperature | -25°C to +70°C |
| Protection Class | IP67 (dust-tight, protected against immersion) |
| Short-Circuit Protection | Yes (built-in) |
| Reverse Polarity Protection | Yes |
| LED Indicator | Red (output ON) |
| Standards | CE, UL |
Frequently Asked Questions - GX-F12A-P PANASONIC
What is the supply voltage range for the GX-F12A-P?
The supply voltage is 12–24 V DC, with a typical operating range of 10.8–30 V DC.
What is the output type and wiring?
The sensor has a PNP (positive switching) normally open output with a pre-wired cable (2 m). Ensure the load is connected between the output and the negative supply.
What is the sensing distance of this sensor?
The nominal sensing distance is 2 mm when mounted flush (shielded) in metal. The actual distance may vary depending on the target material (e.g., steel vs. aluminum).
Can the sensor detect non-metallic objects?
No, inductive proximity sensors only detect conductive (metallic) objects. The sensor will not detect plastics, wood, or liquids.
What is the IP rating and is it suitable for wet environments?
The sensor has an IP67 protection rating, meaning it is dust-tight and can withstand temporary immersion in water. It is suitable for splash-prone areas but not for continuous submersion.
How do I check if the sensor is working?
Apply power (12–24 V DC) and bring a metal object (e.g., steel) within 2 mm of the sensing face. The red LED should illuminate, and the output should switch to high state.
What is the maximum load current?
The maximum switching current is 100 mA. For higher loads, use an interposing relay or amplifier.
Can I use this sensor with a PLC input?
Yes, the PNP output is compatible with most PLC inputs. Ensure the PLC input has a suitable voltage rating (max 30 V).
What is the operating temperature range?
The sensor operates from -25°C to +70°C. Avoid exceeding these limits to prevent damage.
Are there any special installation considerations?
Mount the sensor flush (shielded) to achieve the specified sensing distance. Avoid proximity to other metal objects or sensors to prevent mutual interference.
User questions about GX-F12A-P PANASONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual GX-F12A-P - PANASONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GX-F12A-P by PANASONIC.
USER MANUAL GX-F12A-P PANASONIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PANASONIC
Model : GX-F12A-P
Category : Switch