SIRAX BT7350 - Measuring equipment Camille Bauer - Free user manual and instructions
Find the device manual for free SIRAX BT7350 Camille Bauer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Multifunction Measuring Transducer |
| Brand | Camille Bauer |
| Model | SIRAX BT7350 |
| Category | Measuring Equipment |
| Dimensions (H x W x D) | 72 x 72 x 100 mm |
| Weight | Approx. 300 g |
| Power Supply | AC/DC 85-265 V, 50/60 Hz |
| Measured Variables | Voltage, Current, Active/Reactive/Apparent Power, Power Factor, Frequency, Energy |
| Input Voltage (Nominal) | AC 100-690 V L-L |
| Input Current (Nominal) | 1 A or 5 A (selectable) |
| Output Signal | Analog: 4-20 mA or 0-10 V (programmable) |
| Communication Interface | Modbus RTU (RS-485) optional |
| Accuracy Class | Class 0.5 (IEC 60688) |
| Display | Backlit LCD, 4 lines |
| Operating Temperature | -10°C to +55°C |
| Storage Temperature | -25°C to +70°C |
| Protection Degree | IP40 (front), IP20 (terminals) |
| Mounting | Panel mount, 72x72 mm cutout |
| Maintenance & Cleaning | Clean with dry cloth; no solvents. No user-serviceable parts. |
| Safety Standards | IEC 61010-1, CAT III |
| Spare Parts & Repairability | Contact manufacturer; not field repairable. |
| General Information | Programmable via front keys or software; firmware upgradeable. |
Frequently Asked Questions - SIRAX BT7350 Camille Bauer
How do I install the SIRAX BT7350?
Mount the device in a 72x72 mm panel cutout and secure with the provided clips. Connect the power supply (85-265 V AC/DC) and input voltage/current transformers according to the wiring diagram in the manual. Ensure proper grounding.
Can I measure three-phase power with this device?
Yes, the SIRAX BT7350 supports single-phase, three-phase 3-wire, and three-phase 4-wire systems. Select the appropriate wiring configuration via the setup menu.
How do I configure the analog output?
Use the front panel keys to enter the configuration menu. Select 'AOUT' and choose the variable to output (e.g., active power). Set the output range (0-10 V or 4-20 mA) and scale endpoints. Save and exit.
How do I reset the energy counter?
Press and hold the 'E' key for 5 seconds until the display shows 'RESET'. Confirm with 'ENTER'. This clears accumulated energy values. Note that partial resets may be configured.
What is the accuracy of the SIRAX BT7350?
The device meets Class 0.5 accuracy per IEC 60688 for active power and energy. Voltage and current measurements have an accuracy of ±0.5% of reading.
Can I communicate with the device via Modbus?
Yes, the optional RS-485 interface supports Modbus RTU. Configure the baud rate, parity, and device address in the communication menu (default: 19200, 8N1, address 1). Use standard Modbus function codes.
How do I update the firmware?
Connect a PC via the optional USB service port (if available) or use the back-up/restore software. Download the latest firmware from the Camille Bauer website. Follow the software instructions carefully.
What does the error code 'E-03' mean?
Error code E-03 indicates a phase sequence error. Check the wiring of your voltage inputs: ensure L1, L2, L3 are connected in correct order and that all three phases are present. The device may also show this if voltage is out of range.
How do I clean the device?
Use a soft, dry cloth to clean the front panel. Do not use liquids or abrasive cleaners. Ensure the device is disconnected from power before cleaning.
What is the maximum cable length for the current transformer inputs?
For best accuracy, keep the CT secondary wiring under 10 meters using 2.5 mm² wire. Longer runs may require larger gauge to avoid voltage drop and accuracy degradation.
User questions about SIRAX BT7350 Camille Bauer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual SIRAX BT7350 - Camille Bauer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SIRAX BT7350 by Camille Bauer.
USER MANUAL SIRAX BT7350 Camille Bauer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Camille Bauer
Model : SIRAX BT7350
Category : Measuring equipment