SBS-LAB-117 - Uncategorized STEINBERG - Free user manual and instructions
Find the device manual for free SBS-LAB-117 STEINBERG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Audio interface / digital audio workstation |
| Brand | Steinberg |
| Model | SBS-LAB-117 |
| Dimensions (L x D x H) | Approximately 48 x 20 x 5 cm |
| Weight | Approximately 3.2 kg |
| Power supply | 12V DC power adapter (included) |
| Power consumption | 15 W max |
| Audio inputs | 2 combo XLR/6.35 mm jacks (mic/line), 2 line inputs 6.35 mm jacks |
| Audio outputs | 2 line outputs 6.35 mm jacks, headphone output 6.35 mm jack |
| Connectivity | USB 2.0 Type B, MIDI In/Out |
| Sampling rate | Up to 192 kHz |
| Resolution | 24-bit |
| Main features | Multitrack recording, direct monitoring, microphone preamps, +48V phantom power, gain control, internal mixing |
| Included software | Cubase AI, control software (Steinberg Hub) |
| Care and cleaning | Wipe with a soft, dry cloth. Do not use solvents. |
| Safety | Use only the provided adapter. Do not expose to moisture. |
| Spare parts and repairability | Parts available from Steinberg customer service. Repair by authorized technician recommended. |
| Operating temperature | 5°C to 35°C |
| Warranty | 2 years (according to local legislation) |
Frequently Asked Questions - SBS-LAB-117 STEINBERG
How to install the audio interface driver?
Download the driver from the Steinberg website, then install it before connecting the device. Restart the computer and connect the interface via USB.
The interface is not recognized by my software, what to do?
Check that the driver is correctly installed and that the interface is selected as the audio device in the software preferences. Try another USB port.
How to activate +48V phantom power?
Press the +48V button on the front panel. The corresponding LED lights up. Use this function only with microphones requiring phantom power.
Can I use multiple headphones simultaneously?
Yes, some versions have two headphone outputs. Check the manual for the number of outputs available. You can also use a headphone splitter.
How to adjust the recording level?
Turn the Gain knob of the corresponding channel. Use the output fader for overall volume. Avoid saturation by keeping the level below 0 dB.
What is the latency of the interface?
Latency depends on the buffer size in the ASIO driver. With optimal settings, it can be as low as 2-3 ms. Adjust in the driver control panel.
How to update the firmware?
Download the update utility from the Steinberg website. Connect the interface, run the tool, and follow the instructions. Do not disconnect during the update.
My computer does not detect the interface, what to check?
Test the USB cable, change the port, and try on another computer. If the problem persists, contact Steinberg support.
How to clean the interface?
Use a soft, slightly damp cloth (clean water) to wipe the surface. Never use chemical or abrasive products.
Where to find technical diagrams?
Schematics are not provided to the public. For any repairs, contact an authorized technician or Steinberg after-sales service.
User questions about SBS-LAB-117 STEINBERG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SBS-LAB-117 - STEINBERG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SBS-LAB-117 by STEINBERG.
USER MANUAL SBS-LAB-117 STEINBERG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STEINBERG
Model : SBS-LAB-117
Category : Uncategorized