WAX300H - Network card / adapter ZYXEL - Free user manual and instructions
Find the device manual for free WAX300H ZYXEL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Dimensions (W x D x H) | 180 x 180 x 40 mm (7.1 x 7.1 x 1.6 in) |
| Weight | 400 g (0.88 lbs) |
| Power Supply | PoE (802.3af/at) or DC 12V 1.5A |
| Wi-Fi Standards | IEEE 802.11ax (Wi-Fi 6) dual-band 2.4 GHz & 5 GHz |
| Maximum Data Rate | Up to 1.8 Gbps (2.4 GHz: 574 Mbps, 5 GHz: 1.2 Gbps) |
| Ethernet Port | 1x 2.5 Gigabit Ethernet (RJ-45) |
| MIMO | 2x2 MU-MIMO with OFDMA |
| Antenna | 2 internal dual-band antennas |
| Management | Web GUI, CLI, Zyxel NeoCloud, SNMP |
| Security | WPA2/WPA3, 802.1X, MAC filter, VLAN |
| Mounting | Ceiling or wall mount (kit included) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 10% to 90% (non-condensing) |
| Certifications | CE, FCC, RoHS |
| Maintenance | Clean with a dry, soft cloth; avoid liquids |
| Spare Parts & Repairability | Contact Zyxel support for replacement parts; device is not user-serviceable |
Frequently Asked Questions - WAX300H ZYXEL
How do I set up the Zyxel WAX300H?
Connect the access point to a PoE switch or injector, or use the DC adapter. Power on, then connect to the default Wi-Fi or use the Ethernet port. Access the web interface at the default IP (usually 192.168.1.2) with admin credentials printed on the device label.
Does the WAX300H support Wi-Fi 6?
Yes, it supports Wi-Fi 6 (802.11ax) on both 2.4 GHz and 5 GHz bands for faster speeds and better capacity.
What power options does the WAX300H have?
It supports Power over Ethernet (PoE) 802.3af/at and a DC 12V 1.5A adapter (not included). PoE is recommended for easy installation.
What is the maximum wireless speed?
Theoretical maximum is 1.8 Gbps: 574 Mbps on 2.4 GHz and 1.2 Gbps on 5 GHz. Actual speeds vary based on environment and clients.
Can I mount the WAX300H on a wall or ceiling?
Yes, it comes with a mounting bracket for both ceiling and wall installation. The kit includes screws and anchors.
How many clients can the WAX300H handle?
It is designed for high-density environments and can support over 100 concurrent clients with proper configuration.
Does the WAX300H have a 2.5GbE port?
Yes, it features a 2.5 Gigabit Ethernet (2.5GbE) uplink port that works with standard Cat5e or better cables and can negotiate with 1GbE devices.
How do I reset the WAX300H to factory defaults?
Press and hold the Reset button on the back of the device for about 10 seconds using a paperclip. The LEDs will blink, then the device reboots with default settings.
Is the WAX300H compatible with Zyxel Nebula?
Yes, it can be managed through Zyxel Nebula cloud management for centralized control. Alternatively, use the local web interface or CLI.
What security features does the WAX300H offer?
It supports WPA2/WPA3 encryption, 802.1X authentication, MAC address filtering, and VLAN separation to secure your network.
User questions about WAX300H ZYXEL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card / adapter in PDF format for free! Find your manual WAX300H - ZYXEL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WAX300H by ZYXEL.
USER MANUAL WAX300H ZYXEL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZYXEL
Model : WAX300H
Category : Network card / adapter