WAC6100 - Network card / adapter ZYXEL - Free user manual and instructions
Find the device manual for free WAC6100 ZYXEL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Model | WAC6100 |
| Brand | ZyXEL |
| Wireless Standard | 802.11ac Wave 2 |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Data Rate | Up to 1.73 Gbps (5 GHz) + 300 Mbps (2.4 GHz) |
| MIMO Configuration | 4x4 MU-MIMO |
| Ethernet Ports | 1x Gigabit Ethernet (PoE PD) |
| Power Supply | PoE (802.3at) or 12V DC adapter |
| Power Consumption | Max 15 W |
| Dimensions (W x D x H) | 198 x 198 x 36 mm |
| Weight | Approximately 450 g |
| Antenna Type | Internal dual-band antennas |
| Management | Web interface, CLI, SNMP, Nebula cloud |
| Security | WPA2-PSK, WPA3, RADIUS, MAC filtering |
| Mounting | Ceiling or wall mountable |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% (non-condensing) |
| Certifications | CE, FCC, RoHS |
| Maintenance | Clean with a soft, dry cloth. Do not use liquids or aerosols. |
| Spare Parts | Power adapter and mounting kit available separately. |
| Repairability | No user-serviceable parts. Contact support for repairs. |
Frequently Asked Questions - WAC6100 ZYXEL
How do I set up the ZyXEL WAC6100?
Set up the WAC6100 by connecting it to your PoE switch or injector using an Ethernet cable. Access the web interface via the default IP (192.168.1.2) and follow the setup wizard.
Does the WAC6100 support PoE?
Yes, it supports 802.3at PoE (Power over Ethernet) for both data and power. Alternatively, a 12V DC adapter can be used.
What is the default login and password?
The default username is admin and password is 1234. It is recommended to change these during initial setup.
How do I reset the WAC6100 to factory defaults?
Press and hold the reset button on the back panel for more than 10 seconds until the LED flashes. The device will reboot to factory settings.
What is the maximum number of concurrent users?
The WAC6100 supports up to 128 concurrent users under typical conditions, depending on traffic and environment.
Can I manage this access point remotely?
Yes, via ZyXEL Nebula cloud management or by enabling remote access through the web interface with proper security settings.
Does it support dual-band?
Yes, it operates on both 2.4 GHz and 5 GHz bands simultaneously, providing combined speeds up to 2.03 Gbps.
What security protocols are supported?
It supports WPA2-PSK, WPA3, RADIUS authentication, and MAC address filtering for secure wireless access.
Can I mount it on a wall or ceiling?
Yes, the device includes mounting brackets for both wall and ceiling installation. Ensure proper ventilation.
How do I update the firmware?
Download the latest firmware from the ZyXEL website, then upload it via the web interface under Maintenance > Firmware Upgrade. Do not power off during update.
User questions about WAC6100 ZYXEL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card / adapter in PDF format for free! Find your manual WAC6100 - ZYXEL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WAC6100 by ZYXEL.
USER MANUAL WAC6100 ZYXEL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZYXEL
Model : WAC6100
Category : Network card / adapter