AP70 MK2 - Marine navigation electronics SIMRAD - Free user manual and instructions
Find the device manual for free AP70 MK2 SIMRAD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Autopilot Control Unit |
| Brand | Simrad |
| Model | AP70 MK2 |
| Dimensions (H x W x D) | 115 x 115 x 50 mm (approx.) |
| Weight | 0.5 kg (approx.) |
| Power Supply | 12 V DC / 24 V DC |
| Display Type | Monochrome LCD |
| Operating Temperature | -15°C to +55°C |
| Waterproof Rating | IPX6 |
| Main Functions | Auto-steer, course control, wind vane mode, navigation mode |
| Communication Interfaces | NMEA 2000, NMEA 0183 |
| Included Components | Control unit, mounting bracket, cable |
| Compatibility | Simrad autopilot systems and various drive units |
| Safety Features | Emergency stop, clutch engagement |
| Maintenance | Clean with soft damp cloth, avoid harsh chemicals |
| Reparability | Serviceable by authorized Simrad dealers; spare parts available |
Frequently Asked Questions - AP70 MK2 SIMRAD
How do I install the AP70 MK2 control unit?
Mount the unit in a dry location away from direct sunlight. Connect the power (12/24V DC) and data cables according to the wiring diagram. Ensure the clutch and drive are properly connected. Refer to the manual for detailed steps.
Can I use the AP70 MK2 with any autopilot drive?
The AP70 MK2 is compatible with Simrad and many third-party hydraulic, linear, and rotary drives. Check the drive specifications and ensure proper wiring.
What is the IP rating of the AP70 MK2?
The AP70 MK2 has an IPX6 rating, meaning it is protected against powerful water jets. It is suitable for marine environments but should not be submerged.
How do I calibrate the autopilot?
Calibration involves setting the compass, rudder feedback, and drive type. Use the menu to enter calibration mode and follow the on-screen prompts. A sea trial may be needed for fine-tuning.
The display shows 'No GPS' error. What should I do?
Ensure the GPS receiver is powered and connected properly to the NMEA 2000 network. Check cable connections and verify that the GPS is transmitting data.
Can the AP70 MK2 be used with a wind sensor for wind vane steering?
Yes, the AP70 MK2 supports wind vane mode when connected to a compatible wind sensor via NMEA 2000. Configure the wind mode in the autopilot menu.
How do I update the software of the AP70 MK2?
Software updates are performed via a Simrad update tool or a dealer. Connect the unit to a computer and follow the update instructions provided by Simrad.
What does the 'Clutch Disengaged' alarm mean?
This alarm indicates the drive clutch is not engaged. Check the clutch wiring, ensure the drive is powered, and verify that the clutch is properly connected to the AP70 MK2.
How do I reset the autopilot to factory settings?
To reset, go to the settings menu, select 'Factory Reset', and confirm. Note that this will erase all custom settings, including calibration data.
Is the AP70 MK2 compatible with older Simrad autopilot systems?
The AP70 MK2 is designed to work with Simrad's latest systems, but it may be compatible with older components via NMEA 2000 or 0183 adapters. Check compatibility with your specific model.
User questions about AP70 MK2 SIMRAD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Marine navigation electronics in PDF format for free! Find your manual AP70 MK2 - SIMRAD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AP70 MK2 by SIMRAD.
USER MANUAL AP70 MK2 SIMRAD
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SIMRAD
Model : AP70 MK2
Category : Marine navigation electronics