WW80T304MBS - Washing machine SAMSUNG - Free user manual and instructions

Product Type	Freestanding Front-Loading Washing Machine
Brand	Samsung
Model	WW80T304MBS
Capacity	8 kg
Dimensions (H x W x D)	850 x 600 x 550 mm
Weight	70 kg
Energy Efficiency Class	A+++
Spin Speed	1400 rpm
Power Supply	220-240 V, 50 Hz, 10 A
Water Connection	Cold water only, 3/4" threaded hose
Main Functions	Eco Bubble, Digital Inverter Motor, Quick Wash, Delay End, Child Lock, Drum Clean, Smart Check
Noise Level (Wash/Spin)	52 dB / 74 dB
Annual Energy Consumption	153 kWh
Annual Water Consumption	9500 L
Maintenance	Clean detergent drawer, drain filter, and drum periodically; run Drum Clean+ cycle monthly
Safety Features	Overflow protection, unbalanced load detection, child lock, anti-crease, door lock during operation
Spare Parts / Repairability	Spare parts available for 10 years; repair can be done by qualified technicians
Warranty	2 years standard, 10 years on motor

Frequently Asked Questions - WW80T304MBS SAMSUNG

What is the capacity of the Samsung WW80T304MBS?

The Samsung WW80T304MBS has a capacity of 8 kg, suitable for medium to large households.

Does the WW80T304MBS have a digital inverter motor?

Yes, it features a Digital Inverter Motor, which is quieter, more durable, and energy-efficient.

What is the spin speed of this model?

The maximum spin speed is 1400 rpm, which helps reduce drying time.

How do I clean the drum on the Samsung WW80T304MBS?

Use the Drum Clean+ cycle monthly. You can also run a hot wash with a drum cleaner tablet to remove residue and odors.

What does Eco Bubble technology do?

Eco Bubble technology dissolves detergent completely in water to create bubbles that penetrate fabric quickly, even in cold water, saving energy while providing excellent cleaning.

What is the energy efficiency class of the WW80T304MBS?

It is rated A+++, which is the highest energy efficiency rating, ensuring low electricity consumption.

How do I activate the child lock?

Press and hold the Child Lock button for a few seconds until the lock icon appears on the display. To deactivate, press and hold again.

What should I do if the washing machine is not draining?

Check the drain filter at the bottom front of the machine for blockages. Remove any debris and ensure the drain hose is not kinked or clogged.

Can I use a delayed start on this model?

Yes, the Delay End function allows you to set the washing machine to finish at a specific time, up to 24 hours in advance.

Where can I find replacement parts for the WW80T304MBS?

Genuine Samsung replacement parts are available through authorized service centers and online spare parts retailers. The model supports repairability with parts available for 10 years.

USER MANUAL WW80T304MBS SAMSUNG

Correct disposal of the product (Waste Electrical & Electronic Equipment)

01 Release lever

04 Door

07 Emergency water drain hose

1. Find the transport bolts (marked with circles in the picture) on the back of the washing machine.

CAUTION

Do not remove the bolt (A) that secures the hose clamp.

! CAUTION

When installing the product, make sure the leveling feet do not press on the power cord.

! CAUTION

1. Connect the water hose to the faucet and turn it to the right to tighten.

CAUTION

WARNING

If water leaks, stop the washing machine and unplug it from the power supply. Then contact the Samsung service center in case of leakage from the water hose, or contact a plumber in case of leakage from the water faucet. Otherwise, an electric shock may occur.

Installation

CAUTION

1. Remove the adapter (A) from the water pipe (B).

1. Using a Phillips screwdriver, loosen the four screws on the adapter.

1. Hold the adapter and turn part (C) in the direction of the arrow to release it by 5 mm (*).

1. Insert the adapter onto the faucet, then tighten the screws while lifting the adapter.
2. Turn part (C) in the direction of the arrow to tighten it.

1. While pulling part (D) on the water pipe downward, connect the water pipe to the adapter. Then release part (D). The pipe connects to the adapter with a click.
2. To complete the water pipe connection, refer to items 2 and 3 in the section “Connecting to a threaded faucet.”

NOTE

• After connecting the water pipe to the adapter, check that it is properly connected by pulling the water pipe downward.
• Use standard water faucets. If the faucet is rectangular or too large, remove the spacer ring before inserting the faucet into the adapter.

Installation

Water inlet hose (certain models only)

For models with an additional hot water inlet:

1. Connect the red end of the hot water hose to the hot water inlet on the back of the washing machine.
2. Connect the other end of the hot water hose to the hot water tap.

Over the edge of the sink

Into the sink drain pipe branch

The sink drain pipe branch must be above the sink trap so that the end of the hose is at least 60 cm above the floor.

(*): 60 cm

! CAUTION

CAUTION

01 Pre-wash compartment: Add pre-wash detergent or starch.

02 11 Main wash compartment: Add main wash detergent, water softener, pre-soak agent, bleach, and/or stain remover.

03 Fabric softener compartment: Add additives such as fabric softener. Do not exceed the MAX line (A).

NOTE

1. If you want to prewash, add prewash detergent to the 🟢 prewash compartment according to the instructions or the manufacturer's recommendations.
2. Close the detergent drawer.

Before starting

CAUTION

• Do not put powder detergent in the liquid detergent compartment.
• Concentrated fabric softener must be diluted with water before use.
• Do not put main wash detergent in the fabric softener compartment.
• Do not add too much detergent. This can have a negative effect on the washing results.
• Do not clean the drum with cleaning agents. Chemical residues in the drum reduce washing efficiency.

Control panel

01 Birač ciklusa	Okrenite kotačić da biste odabrali ciklus.
02 Zaslon	Zaslon prikazuje podatke o trenutačnom ciklusu i procijenjeno preostalo vrijeme ili informativnu šifru kad se pojavi problem.
03 Temperatura ⚠️	Pritisnite da biste promijenili temperaturu vode za trenutačni ciklus.Dostupan raspon temperature ovisi o ciklusu. Odabrana temperatura prikazat će se na zaslonu.
04 Centrifugiranje ⚙️	Pritisnite da biste promijenili brzinu centrifugiranja za trenutačni ciklus.Dostupna brzina centrifuge ovisi o ciklusu. Odabrana brzina centrifuge prikazat će se na zaslonu.
05 Odgoda završetka pranja ⚙️	Više puta pritisnite gumb Odgoda završetka pranja ⚙a kretanje kroz dostupne mogućnosti funkcije Odgoda završetka pranja (od 3 sata do 24 sata, uz povećanja od jednog sata).
06 Pokretanje/pauza ▷‖	Pritisnite za pokretanje ili pauziranje radnje.Jednom pritisnite gumb za pokretanje ciklusa.Za pauziranje radnje ponovno pritisnite gumb. Možete promijeniti postavke i opcije ciklusa.Za nastavak pauzirane radnje ponovno pritisnite gumb.
07 Napajanje ⚙️	Pritisnite za uključivanje ili isključivanje perilice za rublje.Ako uključite perilicu za rublje i ne upotrebljavate je 10 minuta, perilica će se automatski isključiti.

*(3 sec): Press and hold for 3 seconds.

Operation

1. Open the cap on the hose so that water from the emergency drain hose (C) flows into a container.
2. When finished, close the cap on the hose and reinsert the hose. Then close the filter cover.

NOTE

1. Clean the particle filter using a soft brush. Check whether the drain pump impeller inside the filter is clogged.
2. Reinsert the particle filter and turn the filter handle to the right.

NOTE

If the particle filter is clogged, the information code “5C” will appear on the display.

CAUTION

1. While holding the release handle on the inside of the drawer, pull out the drawer.
2. Remove the liquid detergent compartment from the drawer.

1. Clean the recess in the drawer with a bottle brush to remove detergent residue and limescale from the recess in the drawer.
2. Reinsert the liquid detergent compartment into the drawer.
3. Push the drawer in to close it.

NOTE

To remove detergent residues, run a RINSE+SPIN cycle without any laundry in the drum.

Maintenance

Vrsta Perilica za rublje s punjenjem s prednje strane
Naziv modela WW9*T304*** WW8*T304*** WW7*T302***
Dimenzije	A (širina) 595 mm 595 mm		mm 595 mm
	B (visina) 850 mm 850 mm		mm 850 mm
	C (dubina) 505 mm 465 mm		mm 440 mm
	D 563 mm 523 mm 498 mm		mm
	E 978 mm 938 mm 913 mm		mm
Tlak vode 0,05 - 1,0 Mpa
Neto težina 64,0 kg 58,0 kg 57,0 kg
Maksimalni kapacitet		Pranje icentrifugiranje	9,0 kg	8,0 kg	7,0 kg
Potrošnja struje	Pranje i grijanje	AC 220 – 240 V /50 Hz	1800-2100 W
Broj okretaja centrifuge			1400 o/min	1400 o/min	1200 o/min

Vrsta Perilica za rublje s punjenjem s prednje strane
Naziv modela			WW8*T301***	WW7*T301***
Dimenzije	A (širina)		595 mm	595 mm
	B (visina)		850 mm	850 mm
	C (dubina) 465 mm		440 mm
	D		523 mm	498 mm
	E		938 mm	913 mm
Tlak vode 0,05 - 1,0 Mpa
Neto težina			59,0 kg	58,0 kg
Maksimalni kapacitet		Pranje icentrifugiranje	8,0 kg	7,0 kg
Potrošnja struje	Pranje i grijanje	AC 220 – 240 V /50 Hz	1850-2100 W
Broj okretaja centrifuge			1200 o/min	1200 o/min

NOTE

1. Design and specifications are subject to change without prior notice for quality improvement purposes.
2. The energy label specifications are determined by using the following program according to EN 60456.

- This program is □COTTON 60 °C and □COTTON 40 °C.

Croatian

In accordance with applicable energy labeling regulations

CAUTION

NOTE

CAUTION

To the drain pipe

WARNING

WARNING

Correct disposal of this product (Disposal of electrical and electronic equipment)

01 Release handle

02 Detergent drawer

03 Control panel

04 Door 05 Drum 06 Lint filter

07 Emergency drain hose

08 Filter cover

09 Worktop

10 Power cord plug

11 Drain hose

12 Leveling feet

Serbian

1. Find the transport bolts (marked with circles in the figure) on the back of the washing machine.

CAUTION

Do not remove the bolt (A) that secures the hose holder.

Installation

1. Using the supplied wrench, loosen all transport bolts by turning them counterclockwise.

NOTE

1. Slowly push the washing machine into place. Rough movements can damage the leveling feet.
2. Level the washing machine by manually adjusting the leveling feet.
3. When finished, tighten the nuts with the wrench.

CAUTION

When installing the appliance, make sure that the leveling feet do not press on the power cord.

CAUTION

Check that all leveling feet are on the floor to prevent the washing machine from moving or making noise due to vibrations. Then check if the washing machine rocks. If the washing machine does not rock, tighten the locknuts.

Installation

STEP 4 Connecting the water hoses

The supplied water hose may differ depending on the model. Follow the instructions for the supplied water hose.

Connecting to a threaded faucet

1. Connect the other end of the water hose to the inlet valve on the back of the washing machine, and then turn it clockwise to tighten it.

1. Slowly open the faucet and check for water leaks at the connections. If water leaks, repeat steps 1 and 2.

⚠ WARNING

If water leaks, stop using the machine and unplug the power cord. Call the local Samsung service center if water leaks from the hose, and a plumber if water leaks from the faucet. Otherwise, an electric shock may occur.

CAUTION

Do not forcefully stretch the water hose. If the hose is too short, replace it with a longer hose that can withstand high pressure.

Connecting to a non-threaded faucet

1. Remove the adapter (A) from the water hose (B).

1. Using a Phillips screwdriver, loosen the four screws on the adapter.

1. Hold the adapter and turn part (C) in the direction of the arrow until it is loosened by 5 mm (*).

1. Place the adapter on the faucet, then tighten the screws while holding the adapter in place.
2. Turn part (C) in the direction of the arrow to secure it.

Installation

1. While pulling down on part (D) on the water hose, connect the hose to the adapter. Then, release part (D). The hose will slide into the adapter with a click.

7. The remaining steps for connecting the water hose are described in steps 2 and 3 of the section "Connecting to a threaded faucet."

NOTE

• After connecting the water hose to the adapter, check that it is properly connected by pulling it downward.
• Use standard types of faucets. If the faucet is square-shaped or too large, remove the spacer before connecting to the adapter.

Water hose (for certain models only)

For models with an additional hot water inlet:

1. Connect the end of the hot water hose with the red mark to the hot water inlet on the back of the machine.
2. Connect the other end of the hot water hose to the hot water faucet.

The water hose alerts the user to the risk of water leakage. It detects water flow, and the indicator (A) in the middle of the hose turns red in case of a leak.

NOTE

The end of the hose with the aqua-stop device attaches to the faucet, not to the machine.

Installation

STEP 5 Connecting the drain hose

The drain hose can be connected in three ways:

Over the edge of the sink

The drain hose must be positioned at a height of 60 cm to 90 cm (*) from the floor. Use the plastic guide (A) supplied in the kit to bend the end of the drain hose. Attach the guide to the wall with a hook to ensure stable water drainage.

In the drain pipe

The drain pipe should be 60 cm to 90 cm (*) high. A vertical pipe of 65 cm is recommended.

- Use the supplied plastic guide (see picture) to secure the drain hose.

- To prevent water from overflowing during draining, be sure to push the drain hose 15 cm into the drain pipe.

- Attach the hose guide to the wall to fix the drain hose.

In the sink drain pipe branch

The drain pipe must be placed above the sink trap so that the end of the hose is at least 60 cm (24 inches) above the floor.

(*): 60 cm (24 inches)

CAUTION

Remove the cap from the sink drain hose branch before connecting the drain hose to it.

CAUTION

1. Place the laundry in the drum, on top of the capsule.

CAUTION

In cycles that use cold water or are shorter than one hour, the capsule may not dissolve completely.

Before first use

Detergent recommendations

The recommendations apply to the temperature ranges specified in the cycle table.

●	Preporučuje se	▲	Samo tečni deterdžent
– Ne	preporučuje se		Samo deterdžent u prahu

Program	Deterdžent			Temp. (°C)
	Univerzalni	Za osetljivu i vunenu odeću	Specijalizovani
ECO 40-60 (Eko 40-60)	●	-	-	40
COTTON (Pamuk)	●	-	-	Cold (Hladna voda) ~ 90
SYNTHETICS (Sintetika)	●	-	-	Cold (Hladna voda) ~ 60
QUICK WASH (Brzo pranje)	●	-	-	Cold (Hladna voda) ~ 30
MIXED LOAD (Mešano)	●	-	-	Cold (Hladna voda) ~ 40
INTENSIVE (Intenzivno)	●			60
WOOL (Vuna)	-	▲	▲	Cold (Hladna voda) ~ 40
COLOURS (Materijali u boji)	●	-	-	Cold (Hladna voda) ~ 40
BABY CARE (Odeća za bebe)	●	-	-	Cold (Hladna voda) ~ 60

01 Prewash compartment: Use prewash detergent or starch.

02 II Main wash compartment: Pour in main wash detergent, water softener, soaking detergent, bleach, and/or stain remover.

03 Fabric softener compartment: Pour in additives, such as fabric softener. Pour fabric softener up to the "max" line (A).

NOTE

1. Pull out the detergent drawer.
2. Pour laundry detergent into the II main wash compartment according to the manufacturer's instructions or recommendations.

1. Pour fabric softener into the fabric softener compartment. Pour the softener up to the "max" line (A).

1. If you also want a prewash, pour prewash detergent into the prewash compartment according to the instructions or the manufacturer's recommendation.
2. Close the detergent drawer.

CAUTION

• Do not pour powder detergent into the liquid detergent compartment.
• Dilute concentrated fabric softener with water before pouring.
• Do not pour main wash detergent into the fabric softener compartment.
• Do not pour too much detergent. This can negatively affect the washing results.
• Do not clean the drum with cleaning agents. Residues of chemical agents in the drum reduce the washing performance.

Control panel

01 Regulator ciklusa	Okrenite regulator da biste izabrali ciklus.
02 Ekran	Na displeju se prikazuju informacije o izabranom ciklusu i procenjeno preostalo vreme trajanja ciklusa, odnosno informativni kôd kada se javi problem.
03 Temperatura 🚗	Pritiskanjem menjate temperaturu vode u izabranom ciklusu.Dostupni opseg temperature zavisi od ciklusa. Izabrana temperatura će se prikazati na ekranu.
04 Centrifuga 📄	Pritiskanjem menjate brzinu centrifugiranja u izabranom ciklusu.Dostupne brzine centrifugiranja zavise od ciklusa. Izabrana brzina centrifugiranja se prikazuje na ekranu.
05 Odloženi kraj 📋	Pritiskajte dugme Odloženi kraj 📋više puta da biste pregledali dostupne opcije za ciklus Odloženi kraj (od 3 do 24 sati u koracima od jednog sata).
06 Pokretanje/pauza ▷||	Pritisnite ovo dugme da biste pokrenuli ili pauzirali rad.Pritisnite dugme jednom da biste pokrenuli ciklus.Da biste pauzirali rad, ponovo pritisnite dugme. Možete da promenite postavke i opcije ciklusa.Da biste nastavili rad nakon pauze, ponovo pritisnite dugme.
07 Napajanje 🙏	Pritisnite da biste uključili ili isključili mašinu za pranje veša.Ako uključite mašinu za pranje veša i ne koristite je 10 minuta, ona će se automatski isključiti.

*(3 sec): Press and hold for 3 seconds.

1. Open the cover and drain the water from the emergency drain hose (C) into a container.
2. When finished, put the cover back on and return the hose. Then close the filter cover.

NOTE

1. Turn off the machine and unplug the power cord from the outlet.
2. Turn off the water tap.
3. Unscrew and remove the water hose from the back of the washing machine. Cover the hose with a cloth to prevent sudden water flow.

1. Using pliers, pull out the mesh filter from the water inlet valve.
2. Immerse the filter deeply in water so that the threaded connection is also under water.
3. Leave the filter to dry in the shade.
4. Reinsert the filter into the valve and reconnect the water hose to the water inlet valve.
5. Turn off the water tap.

NOTE

1. Turn off the machine and unplug the power cord from the outlet.
2. Drain the remaining water from the drum. See the section "Emergency water drain".
3. Open the filter cover (A) using a tool such as a coin.
4. Turn the waste filter handle to the left and drain any remaining water.
5. Clean the waste filter with soft brushes. Check that the drain pump impeller located in the filter is not clogged.
6. Replace the waste filter and turn the filter handle to the right.

NOTE

1. Press down the release lever on the inside of the drawer and pull out the drawer.
2. Remove the liquid detergent guide from the drawer.

1. Clean the drawer compartments with a soft brush under running water.

1. Clean the drawer recess with a bottle brush to remove detergent residue and limescale.
2. Replace the liquid detergent guide in the drawer.
3. Close the drawer by pushing it into the machine.

NOTE

To remove any remaining detergent, run the RINSE+SPIN cycle while the drum is empty.

01 Tab

02 Dispenser drawer

1. When finished, tighten the nuts with a wrench.

! WARNING

1. Connect the other end of the water hose to the water inlet valve on the back of the washing machine and turn it clockwise to tighten.

1. Remove the ring (A) from the water hose (B).

1. Hold the ring and turn part (C) in the direction of the arrows to unscrew it by 5 mm (*).

1. Connect the ring to the tap and tighten the screws while lifting the ring.
2. Turn part (C) in the direction of the arrows to tighten it.

Over the edge of the sink

1. Place the capsule at the far back of the bottom of the empty drum.

1. Place the laundry in the drum on top of the capsule.

WARNING

NOTE

WARNING

What you need to know about the safety instructions 4

Important safety symbols 4

Important safety precautions 5

Critical installation warnings 7

Installation cautions 8

Critical usage warnings 9

Usage cautions 10

Critical cleaning warnings 13

Instructions about the WEEE 14

Ecodesign 14

Installation 15

What's included 15

Installation requirements 17

Step-by-step installation 19

Before you start 29

Initial settings 29

Laundry guidelines 29

Detergent recommendation 33

Detergent drawer guidelines 34

Operations 37

Control panel 37

Simple steps to start 38

Cycle overview 39

Settings 41

Maintenance 42

Emergency drain 42

Cleaning 43

Recovery from freezing 46

Care against an extended time of disuse 46

2 English

Troubleshooting 47

Checkpoints 47

Information codes 51

Specifications 53

Fabric care chart 53

Protecting the environment 54

Spare parts guarantee 54

Specification sheet 54

Information of main washing programmes 59

Indicative information (According to EU 2019/2023) 60

EPREL information 61

Contact information 62

Safety information

Congratulations on your new Samsung washing machine. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your washing machine's many benefits and features.

What you need to know about the safety instructions

Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance. Please store the manual in a safe location close to the appliance for future reference. Use this appliance only for its intended purpose as described in this instruction manual.

Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur. It is your responsibility to use common sense, caution and care when installing, maintaining and operating your washing machine.

Because the following operating instructions cover various models, the characteristics of your washing machine may differ slightly from those described in this manual and not all warning signs may be applicable. If you have any questions or concerns, contact your nearest service centre or find help and information online at www.samsung.com.

Important safety symbols

What the icons and signs in this user manual mean:

WARNING

Hazards or unsafe practices that may result in severe personal injury, death and/or property damage.

CAUTION

Hazards or unsafe practices that may result in personal injury and/or property damage.

NOTE

Indicates that a risk of personal injury or material damage exists.

These warning signs are here to prevent injury to yourself and others.

Please follow them explicitly.

After reading this manual, store it in a safe place for future reference.

Read all instructions before using the appliance.

As with any equipment that uses electricity and moving parts, potential hazards exist. To safely operate this appliance, familiarize yourself with its operation and exercise care when using it.

Important safety precautions

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following:

1. This appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
2. For use in Europe: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
3. Children should be supervised to ensure that they do not play with the appliance.

Safety information

1. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
2. The new hose-sets supplied with the appliance are to be used and old hose-sets should not be reused.
3. For appliances with ventilation openings in the base, a carpet must not obstruct the openings.
4. For use in Europe: Children of less than 3 years should be kept away unless continuously supervised.
5. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
6. This appliance is intended to be used in household only and it is not intended to be used such as:

– staff kitchen areas in shops, offices and other working environments; - farm houses; – by clients in hotels, motels and other residential type environments; - bed and breakfast type environments; - areas for communal use in blocks of flats or in launderettes.

Critical installation warnings

WARNING

The installation of this appliance must be performed by a qualified technician or service company.

- Failure to do so may result in electric shock, fire, an explosion, problems with the product, or injury.

The appliance is heavy, therefore take care when lifting it.

Plug the power cord into a wall socket that meets local electrical specifications. Use the socket for this appliance only, and do not use an extension cord.

• Sharing a wall socket with other appliances using a power strip or extending the power cord may result in electric shock or fire.
• Ensure that the power voltage, frequency, and current are the same as those of the product specifications. Failure to do so may result in electric shock or fire. Plug the power plug into the wall socket firmly.

Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis.

• Unplug the power plug and clean it with a dry cloth.
• Failure to do so may result in electric shock or fire.

Plug the power plug into the wall socket so that the cord is running towards the floor.

- If you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and this may result in electric shock or fire.

Keep all packaging materials out of the reach of children as these may be dangerous.

- If a child places a bag over its head, it may suffocate.

When the appliance, power plug or power cord is damaged, contact your nearest service centre.

This appliance must be properly grounded.

Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

• This may result in electric shock, fire, an explosion, or problems with the product. - Never plug the power cord into a socket that is not grounded correctly and make sure that it is in accordance with local and national regulations.

Do not install this appliance near a heater or any inflammable material.

Do not install this appliance in a humid, oily or dusty location, or in a location exposed to direct sunlight or water (rain drops).

Do not install this appliance in a location exposed to low temperatures.

- Frost may cause the tubes to burst.

Do not install this appliance in a location where gas may leak.

• This may result in electric shock or fire.

Safety information

Do not use an electric transformer.

• This may result in electric shock or fire.

Do not use a damaged power plug, damaged power cord, or loose wall socket.

• This may result in electric shock or fire.

Do not pull or excessively bend the power cord.

Do not twist or tie the power cord.

Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord into the space behind the appliance.

• This may result in electric shock or fire.

Do not pull the power cord when unplugging the power plug.

- Unplug the power plug by holding the plug.

- Failure to do so may result in electric shock or fire.

This appliance should be positioned so that the power plug, the water supply taps, and the drain pipes are accessible.

Following the repair by a non-authorised service provider, self-repair or non-professional repair of the product, Samsung is not liable for any damage to the product, any injury or any other product safety issue caused by any attempt to repair the product which does not carefully follow these repair and maintenance instructions. Any damage to the product caused by an attempt to repair the product by any person other than a Samsung certified service provider will not be covered by the warranty.

Installation cautions

CAUTION

This appliance should be positioned in such a way that the power plug is easily accessible.

- Failure to do so may result in electric shock or fire due to electric leakage.

Install your appliance on a solid, level floor that can support its weight.

- Failure to do so may result in abnormal vibrations, movement, noise, or problems with the product.

English

Critical usage warnings

WARNING

If the appliance is flooded, turn off the water & power supplies immediately and contact your nearest service centre.

• Do not touch the power plug with wet hands.
• Failure to do so may result in electric shock.

If the appliance generates a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact your nearest service centre.

- Failure to do so may result in electric shock or fire.

In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without touching the power plug. Do not touch the appliance or power cord.

• Do not use a ventilating fan. • A spark may result in an explosion or fire.

Remove the washing machine door lever before disposing the appliance.

- If trapped inside the appliance, children may suffocate to death.

Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the washing machine before using it.

Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or other inflammable or explosive substances.

• This may result in electric shock, fire, or an explosion.

Do not open the washing machine door by force while it is operating (high-temperature washing/drying/spinning).

• Water flowing out of the washing machine may result in burns or cause the floor to be slippery. This may result in injury.
• Opening the door by force may result in damage to the product or injury.

Do not touch the power plug with wet hands.

• This may result in electric shock.

Do not turn the appliance off by unplugging the power cord while an operation is in progress.

- Plugging the power cord into the wall socket again may cause a spark and result in electric shock or fire.

Do not let children climb in or onto the appliance.

• This may result in electric shock, burns or injury.

Do not insert your hand or a metal object under the washing machine while it is operating.

• This may result in injury.

Safety information

Do not unplug the appliance by pulling the power cord. Always grip the plug firmly and pull it straight out of the outlet.

- Damage to the power cord may cause a short-circuit, fire and/or electric shock.

Do not attempt to repair, disassemble, or modify the appliance yourself.

- Do not use a fuse (such as copper, steel wire, etc.) other than a standard fuse.

- When the appliance needs to be repaired or reinstalled, contact your nearest service centre.

- Failure to do so may result in electric shock, fire, problems with the product, or injury.

If the water supply hose comes loose from the watertap and floods the appliance, unplug the power cord.

- Failure to do so may result in electric shock or fire.

Unplug the power cord when the appliance is not being used for long periods of time or during a thunder or lightning storm.

- Failure to do so may result in electric shock or fire.

If any foreign substance enters the appliance, unplug the power cord and contact your nearest Samsung Customer Service.

• This may result in electric shock or fire.

Do not let children (or pets) play in or on your washing machine. The washing machine door does not open easily from the inside and children may be seriously injured if trapped inside.

Usage cautions

CAUTION

When the washing machine is contaminated by a foreign substance such as detergent, dirt, food waste, etc., unplug the power cord and clean the washing machine using a damp, soft cloth.

- Failure to do so may result in discolouration, deformation, damage, or rust.

The front glass may be broken by a strong impact. Take care when using the washing machine.

- If the glass is broken, it may result in injury.

Open the water tap slowly after a long period of non-use, water supply failure, or when reconnecting the water supply hose.

- The air pressure in the water supply hose or the water pipe may damage a product part or result in a water leak.

If a draining error occurs during an operation, check if there is a draining problem.

- If the washing machine is used when it is flooded because of a draining problem, it may result in electric shock or fire.

Insert the laundry into the washing machine completely so that the laundry does not get caught in the door.

- If laundry gets caught in the door, it may result in damage to the laundry or the washing machine, or result in a water leak.

Turn the water supply off when the washing machine is not being used.

- Ensure that the screws on the water supply hose connector are properly tightened.

Ensure that the rubber seal and front door glass are not contaminated by a foreign substance (e.g. waste, thread, hair, etc.).

- If a foreign substance is caught in the door or the door is not completely closed, it may cause a water leak.

Open the water tap and check if the water supply hose connector is firmly tightened and that there is no water leak before using the appliance.

- If the screws on the water supply hose connector are loose, it may result in a water leak.

The product you have purchased is designed for domestic use only.

Using the product for business purposes qualifies as a product misuse. In this case, the product will not be covered by the standard warranty provided by Samsung and no responsibility can be attributed to Samsung for malfunctions or damages resulting from such misuse.

Do not stand on the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.

• This may result in electric shock, fire, problems with the product, or injury.

Do not spray volatile material such as insecticide onto the surface of the appliance.

- As well as being harmful to humans, this may result in electric shock, fire or problems with the appliance.

Do not place objects that generate electromagnetic fields near the washing machine.

- This may result in injury due to a malfunction.

Water drained during a high-temperature wash or drying cycle is hot. Do not touch the water.

• This may result in burns or injury.

Draining time may vary depending on the water temperature. If the water temperature is too high, the draining process starts after the water cools down.

Do not wash, spin, or dry water-proof seats, mats, or clothing (*) unless your appliance has a special cycle for washing these items.

Safety information

(*): Woollen bedding, rain covers, fishing vests, ski pants, sleeping bags, diaper covers, sweat suits, and bicycle, motor cycle and car covers, etc.

• Do not wash thick or hard mats even if the washing machine mark is on the care label. This may result in injury or damage to the washing machine, walls, floor, or clothing due to abnormal vibrations.
• Do not wash throw rugs or doormats with rubber backing. The rubber backing may come off and stick to inside the drum, and this may result in malfunction such as a drainage error.

Do not operate the washing machine when the detergent drawer is removed.

- This may result in electric shock or injury due to a water leak.

Do not touch the insides of the drum during or just after drying as it is hot.

• This may result in burns.

The door glass becomes hot during washing and drying. Therefore, do not touch the door glass.

Also, do not allow children to play around the washing machine or touch the door glass.

• This may result in burns.

Do not insert your hand into the detergent drawer.

- This may result in injury as your hand may be caught by the detergent input device.

Remove the liquid detergent guide (applicable models only) when using powdered detergent.

- If not, water may leak through the front of the detergent drawer.

Do not place any objects (such as shoes, food waste, animals) other than laundry into the washing machine.

- This may result in damage to the washing machine, or injury and death in the case of pets due to the abnormal vibrations.

Do not press the buttons using sharp objects such as pins, knives, fingernails, etc.

• This may result in electric shock or injury.

Do not wash laundry contaminated by oils, creams or lotions usually found in skincare shops or massage clinics.

- This may cause the rubber seal to become deformed and result in a water leak.

Do not leave metal objects such as safety pins, hair pins or bleach in the drum for long periods of time.

• This may cause the drum to rust.

- If rust starts appearing on the surface of the drum, apply a (neutral) cleansing agent to the surface and use a sponge to clean it. Never use a metal brush.

Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry contaminated by dry cleaning detergent.

• This may result in spontaneous combustion or ignition due to the heat from the oxidation of the oil.

Do not use water from water cooling/heating devices.

- This may result in problems with the washing machine.

Do not use natural hand-washing soap for the washing machine.

- If it hardens and accumulates inside the washing machine, it may result in problems with the product, discolouration, rust, or bad odours.

Place socks and brassieres in a washing net and wash them with the other laundry.

Do not wash large laundry items such as bedding in the washing net.

- Failure to do so may result in injury due to abnormal vibrations.

Do not use hardened detergent.

- If it accumulates inside the washing machine, it may result in a water leak.

Make sure that the pockets of all the clothing items to be washed are empty.

- Hard, sharp objects such as coins, safety pins, nails, screws, or stones can cause extensive damage to the appliance.

Do not wash clothing with large buckles, buttons or other heavy metal objects.

Sort the laundry by colour on the basis of its colorfastness and select the recommended cycle, water temperature and additional functions.

- This may result in discolouration or fabric damage.

Take care that children's fingers are not caught in the door when you close it.

- Failure to do so may result in injury.

To prevent odours and mould, leave the door open after a wash cycle to allow the drum to dry.

To prevent limescale build up, leave the detergent drawer open after a wash cycle and dry inside it.

Critical cleaning warnings

WARNING

Do not clean the appliance by spraying water directly onto it.

Do not use a strong acidic cleaning agent.

Do not use benzene, thinner or alcohol to clean the appliance.

• This may result in discolouration, deformation, damage, electric shock or fire.

Before cleaning or performing maintenance, unplug the appliance from the wall socket.

- Failure to do so may result in electric shock or fire.

Safety information

Instructions about the WEEE

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

For information on Samsung's environmental commitments and product regulatory obligations, e.g. REACH, WEEE or Batteries, visit our sustainability page available via www.samsung.com

Ecodesign

For detailed instructions on installation and cleaning of the washing machine and ecodesign information (according to (EU)2019/2023), visit the Samsung website (http://www.samsung.com), go to Support >Support home, and then enter the model name.

Installation

Follow these instructions carefully to ensure proper installation of the washing machine and to prevent accidents when doing laundry.

What's included

Make sure all the parts are included in the product package. If you have a problem with the washing machine or the parts, contact a local Samsung customer centre or the retailer.

01 Release lever

04 Door

07 Emergency drain tube

10 Powerplug

02 Detergent drawer

05 Drum

08 Filter cover

11 Drain hose

03 Control panel

06 Debris filter

09 Worktop

12 Levelling feet

English 15

Installation

Spanner, Bolt caps, Hose guide

Cold water hose, Hot water hose

NOTE

• A spanner is needed for adjusting the levelling feet and removing the shipping bolts on the back of the washing machine.
• 4 bolt caps are provided for covering the shipping bolt holes.
• Use the hose guide to loop the end of the drain hose.
• Connect the cold and hot water hoses to the inlets at the back of the washing machine to supply cold and hot water.
• Some models may just have one water supply inlet which is for cold water. If your washing machine has one water supply inlet, make sure you connect the cold water hose to the cold water tap.

Installation requirements

Electrical supply and grounding

• AC 220-240 V / 50 Hz fuse or circuit breaker is required
• Use an individual branch circuit specific to the washing machine

To ensure proper grounding, the washing machine comes with a power cord featuring a three-prong grounding plug for use in a properly installed and grounded outlet.

Check with a qualified electrician or serviceperson if you are not sure about the grounding.

Do not modify the provided plug. If it does not fit the outlet, call a qualified electrician to install a proper outlet.

WARNING

• Do NOT use an extension cord.
• Use only the power cord that comes with the washing machine.
• Do NOT connect the ground wire to plastic plumbing, gas lines, or hot water pipes.
• Improperly connected grounding conductors may cause electric shock.

Water supply

A proper water pressure for this washing machine is between 50 kPa and 1000 kPa. Water pressure less than 50 kPa may cause the water valve not to close completely. Or, it may take longer to fill the drum, causing the washing machine to turn off.

Water taps must be within 120 cm from the rear of the washing machine so that the provided inlet hoses reach the washing machine.

To reduce the risk of leaks:

• Make sure water taps are easily accessible.
• Turn off the taps when the washing machine is not in use.
• Check for any leaks at the water inlet hose fittings on a regular basis.

CAUTION

Before using the washing machine for the first time, check all connections at the water valve and taps for any leaks.

Drain

Samsung recommends a standpipe in height of 60-90 cm. The drain hose must be connected through the hose clip to the standpipe, and the standpipe must fully cover the drain hose.

Flooring

For best performance, the washing machine must be installed on a solid floor. Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting and soft tile surfaces are not a good resistance to vibrations and may cause the washing machine to move slightly during the spin cycle.

Installation

CAUTION

Do NOT install the washing machine on a platform or a poorly supported structure.

Water temperature

Do not install the washing machine in areas where water may freeze as the washing machine always retains some water in its water valves, pumps, and/or hoses. Frozen water left in the connection parts may cause damage to belts, the pump, and other components of the washing machine.

Alcove or closet installation

Minimum clearance for stable operation:

Sides 25	mm Rear 50	mm
Top 25	mm Front 550	mm

If both the washing machine and a dryer are installed in the same location, the front of the alcove or closet must have at least a 550 mm unobstructed air opening. Your washing machine alone does not require a specific air opening.

Step-by-step installation

STEP 1 Select a location

Location requirements:

• Solid, level surface without carpeting or flooring that may obstruct ventilation - Away from direct sunlight - Adequate room for ventilation and wiring • The ambient temperature is always higher than the freezing point (0 °C) - Away from a heat source

NOTE

• To prevent excessive vibration while operating the washing machine, consider stability before anything else. • Install your washing machine on a solid and level floor.
• Do not install your washing machine on soft floors or floor coverings.
• If you install your washing machine on a wood floor, install a water-resistance wooden panel (min 1.18 in. / 30 mm thick) to the floor. Also, we recommend installing your washing machine on the corner of the wood floor.

Installation

STEP 2 Remove the shipping bolts

Unpack the product package and remove all shipping bolts.

NOTE

Number of shipping bolts may differ depending on the model.

WARNING

• Packaging materials can be dangerous to children. Dispose all packaging material (plastic bags, polystyrene, etc.) out of children's reach.
• To avoid injury, cover the holes with bolt caps after removing the shipping bolts. Do not move the washing machine without the shipping bolts in place. Assemble the shipping bolts before moving the washing machine to another location. Keep the shipping bolts in a safe place for future use.

1. Locate the shipping bolts (marked with circle in the figure) on the rear side of the washing machine.

CAUTION

Do not remove the screw(A) that fixes the hose clip.

1. Using the supplied spanner, loosen all the shipping bolts by turning them counterclockwise.

NOTE

You must keep the shipping bolts for future use.

1. Insert the bolt caps (B) to the holes (marked with circle in the figure).

Installation

STEP 3 Adjust the levelling feet

1. Gently slide the washing machine into position. Excessive force may damage the levelling feet.
2. Level the washing machine by manually adjusting the levelling feet.
3. When levelling is complete, tighten the nuts using the spanner.

CAUTION

When installing the product make sure the levelling feet is not pressing the power cord.

CAUTION

Make sure all the levelling feet are seating on the floor surface to avoid the washing machine from moving or generating noise due to vibration. Then, check if the washing machine is rocking. If the washing machine is not rocking, tighten the nuts.

STEP 4 Connect the water hose

The provided water hose may differ depending on the model. Please follow the instruction according to the provided water hose.

Connecting to a threaded water tap

1. Connect the water hose to the water tap, and then turn it to the right to tighten.

CAUTION

Before connecting the water hose, make sure there is a rubber washer in the hose connector. Do not use the hose if the washer is damaged or missing.

1. Connect the other end of the water hose to the inlet valve on the back of the washing machine and then turn it to the right to tighten.

1. Slowly open the water tap and check if there are any leaks around the connection areas. If there are water leaks, repeat steps 1 and 2.

WARNING

If there is a water leak, stop operating the washing machine and disconnect it from the electrical supply. Then, contact a local Samsung service centre in case of a leak from the water hose, or contact a plumbing technician in case of a leak from the water tap. Otherwise, this may cause electric shock.

Installation

CAUTION

Do not stretch the water hose by force. If the hose is too short, replace it with a longer, high-pressure hose.

Connecting to a non-threaded water tap

1. Remove the adaptor (A) from the water hose (B).

1. Use a Phillips screwdriver to loosen the four screws on the adaptor.

1. Hold the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*).

1. Insert the adaptor onto the water tap, and then tighten the screws while lifting the adaptor.
2. Turn part (C) in the arrow direction to tighten it.

1. While pulling down part (D) on the water hose, connect the water hose to the adaptor. Then, release part (D). The hose fits into the adaptor with a clicking sound.
2. To complete connecting the water hose, see 2 and 3 on the "Connecting to a threaded water tap" section.

NOTE

• After connecting the water hose to the adaptor, check if it is connected properly by pulling the water hose downwards.
• Use a popular type of water taps. If the tap is square-shaped or too big, remove the spacer ring before inserting the tap into the adaptor.

Installation

Aqua hose (applicable models only)

For models with an additional hot water inlet:

1. Connect the red end of the hot water hose to the hot water inlet on the back of the machine.
2. Connect the other end of the hot water hose to the hot water tap.

The aqua hose alerts users of a risk of water leaks. It senses the water flow and turns red on the centre indicator (A) in case of a leak.

NOTE

The end of the aqua stop hose must be fitted to the watertap and not the machine.

STEP 5 Position the drain hose

The drain hose can be positioned in three ways:

Over the edge of a wash basin

The drain hose must be placed at a height of between 60 cm and 90 cm (*) from the floor. To keep the spout of the drain hose bent, use the supplied plastic hose guide (A). Secure the guide to the wall using a hook to ensure stable drainage.

In a drain pipe

The drain pipe should be between 60 cm and 90 cm high (*). It is advisable to use a 65 cm high vertical pipe.

• To ensure the drain hose stays in position, use the plastic hose guide provided (see the figure). - To prevent the siphoning of water flow during drainage, make sure to insert the drain hose 15 cm in the drain pipe. • To prevent the drain hose from moving around, secure the hose guide to the wall.

Drain standpipe requirements:

• Minimum diameter of 5 cm • Minimum carry-away capacity of 60 litres per minute

Installation

In a sink drain pipe branch

The drain pipe branch must be above the sink siphone so that the end of the hose is at least 24 in. (60 cm) above the ground.

(*): 24 in. (60 cm)

CAUTION

Remove the lid on the sink drain pipe branch before connecting the drain pipe to it.

CAUTION

Do not put the drain hose in places of stagnant water or ponding. The water may flow back to the washing machine.

STEP 6 Power on

Plug the power cord into a wall socket featuring an AC 220-240 V / 50 Hz approved electrical outlet protected by a fuse or circuit breaker. Then, press Power ① to turn on the washing machine.

Before you start

Initial settings

Make sure your washing machine is installed properly before using it.

You must complete a wash cycle without clothes before washing clothes for the first time.

1. Connect the water hoses to the water tap and the washing machine.
2. Plug the power cord into an electrical outlet.
3. Add about 10 g of detergent into the detergent drawer.
4. Press Power ⏻ to turn on the washing machine.
5. Turn the Cycle Selector to select COTTON.
6. Press Start/Pause ▷II.

Laundry guidelines

STEP 1 Sort

Sort the laundry according to these criteria:

• Care Label: Sort the laundry into cottons, mixed fibres, synthetics, silks, wools, and rayon. • Colour: Separate whites from colours.
• Size: Mixing different-sized items together in the drum improves the washing performance.
• Sensitivity: Wash delicate items separately such as pure woollen items, curtains, and silk items. Check the labels on the items.

NOTE

Make sure to check the care label on the clothing, and sort them accordingly before starting the wash.

Before you start

STEP 2 Empty pockets

Empty all the pockets of your laundry items.

Metal objects such as coins, pins, and buckles on clothing may damage other laundry items as well as the drum.

Turn clothing with buttons and embroideries inside out.

• If pants or jacket zippers are open while washing, the drum may be damaged. Zippers should be closed and fixed with a string.
• Clothing with long strings may become entangled with other clothes. Make sure to tie the strings before starting the wash.

STEP 3 Use a laundry net

• Brassieres (water washable) must be placed in a laundry net. Metal parts of the brassieres may break through and tear other laundry items.
• Small, light clothing such as socks, gloves, stockings, and handkerchiefs may become caught around the door. Place them inside a fine laundry net.
• Do not wash the laundry net by itself without other laundry. This may cause abnormal vibrations that could move the washing machine and result in injury.

STEP 4 Prewash (if necessary)

Select the Prewash option for the selected course if the laundry is heavily soiled. When selecting the prewash option, make sure to put powder-type detergent into the main wash compartment.

STEP 5 Determine the load capacity

Do not overload the washing machine. Overloading may cause the washing machine to not wash properly. For the load capacity for the type of clothing, see page 39.

NOTE

When washing bedding or bedding covers, the wash time may be lengthened or the spin efficiency may be reduced. For bedding or bedding covers, the recommended maximum spin cycle speed is 800 rpm, and the load capacity is 2.0 kg or less.

CAUTION

• Unbalanced laundry may reduce the spinning performance.
• Make sure the laundry is fully inserted in the drum and not caught in the door.
• Do not slam the door. Close the door gently. Otherwise, the door may not be closed properly.

STEP 6 Apply a proper detergent type

The type of detergent depends on the type of fabric (cotton, synthetic, delicate items, wool), colour, wash temperature, and degree of soiling. Always use “low suds” laundry detergent, which is designed for automatic washing machines.

NOTE

• Follow the detergent manufacturer's recommendations based on the weight of the laundry, the degree of soiling, and the hardness of the water in your local area. If you are not sure about the water hardness, contact a local water authority.
• Do not use detergent that tends to be hardened or solidified. This detergent may remain after the rinse cycle, blocking the drain outlet.

CAUTION

When washing wool using the WOOL 🎨 cycle, use only a neutral liquid detergent. If used with the WOOL 🎨 cycle, powder detergent may remain on the laundry and discolour the laundry.

Before you start

Laundry capsules

To get the best results from using laundry capsules, please follow these instructions.

1. Put the capsule in the bottom of the empty drum towards the rear.

1. Put the laundry in the drum on top of the capsule.

CAUTION

For cycles using cold water or cycles that complete in less than one hour, the capsule may not dissolve completely.

Detergent recommendation

The recommendations apply to the temperature ranges given in the cycle chart.

●	Recommended	▲	Liquid detergent only
- Not recommended		△	Powder detergent only

Cycle	Detergent			Temp. (°C)
	Universal	Delicates and woollens	Specialist
ECO 40-60	●	-	-	40
COTTON	●	-- Cold ~	90
SYNTHETICS	●	-- Cold ~	60
QUICK WASH	●	-- Cold ~	30
MIXED LOAD	●	-- Cold ~	40
INTENSIVE	●			60
WOOL 🌐	-	▲	▲	Cold ~ 40
COLOURS	●	-- Cold ~	40
BABY CARE	●	-- Cold ~	60

The values given for programmes other than the ECO 40-60 programme are indicative only.

Before you start

Detergent drawer guidelines

The washing machine provides a three-compartment dispenser: the left compartment for the main wash, the center for fabric softeners, and the right for the preliminary wash.

01 Prewash compartment: Apply prewash detergent or starch.

02 II Main-wash compartment: Apply main-wash detergent, water softener, soaking detergent, bleach, and/or stain removers.

03 Softener compartment: Apply additives such as fabric softener. Do not exceed the max line (A).

NOTE

The actual appearance of the softener guide may differ with the model.

CAUTION

• Do not open the detergent drawer while the washing machine is operating.
• Do not use the following types of detergent:

- Tablet or capsule types

- Ball or net types

• To prevent the compartment clogging, concentrated or highly-enriched agents (fabric softener or detergent) must be diluted with water before being applied.
• When Delay End is selected, do not apply detergent directly into the drum. Otherwise, this may discolour the laundry. Use the detergent drawer when Delay End is selected.

To apply washing agents to the detergent drawer

1. Slide open the detergent drawer.
2. Apply laundry detergent to the main-wash compartment as instructed or recommended by the manufacturer.

1. Apply fabric softener to the softener compartment. Do not exceed the max line (A). Softener is dispensed into the wash during the final rinse.

1. If you want to prewash, apply prewash detergent to the prewash compartment as instructed or recommended by the manufacturer.
2. Close the detergent drawer.

Before you start

CAUTION

• Do not apply powder detergent to the liquid detergent guide.
• Concentrated fabric softener must be diluted with water before applied.
• Do not apply main-wash detergent to the softener compartment.
• Do not add an excessive amount of detergent. This may affect the washing results adversely.
• Do not use any cleaning agents for cleaning the drum. Chemical residue in the drum deteriorates the washing performance.

Operations

Control panel

01 Cycle Selector Turn	the dial to select a cycle.
02 Display	The display shows current cycle information and estimated time remaining, or an information code when a problem occurs.
03 Temp.	Press to change the water temperature for the current cycle.Available temperature range depends on the cycle. The selected temperature will be displayed on the display.
04 Spin	Press to change the spinning speed for the current cycle.Available spin speed depends on the cycle. The selected spin speed will be displayed on the display.
05 Delay End	Press Delay End repeatedly to cycle through the available Delay End options (from 3 to 24 hours in one hour increments).
06 Start/Pause ▷||	Press to start or pause operation.Press the button once to start a cycle.To pause operation, press the button again. You may change the cycle settings and options.To resume paused operation, press the button again.
07 Power	Press to turn on or off the washing machine.If you turn on the washing machine and do not use it for 10 minutes, it will turn off automatically.

*(3 sec): Press and hold for 3 seconds.

Operations

Simple steps to start

1. Press Power ⏻ to turn on the washing machine.
2. Turn the Cycle Selector to select a cycle.
3. Change the cycle settings (Temp. and Spin) as necessary.
4. Set Delay End if you want to finish the wash cycle at the desired time.
5. Press Start/Pause ▷II.

To change the cycle during operation

1. Press Start/Pause ▷|| to stop operation.
2. Select a different cycle.
3. Press Start/Pause ▷|| again to start the new cycle.

Cycle overview

Standard cycles

Cycle Description		Max load (kg)
		9 kg model	8 kg model	7 kg model
COTTON	For cottons, bed linens, table linens, underwear, towels, or shirts.The washing time and the rinse count are automatically adjusted according to the load.For Cleaning lightly soiled cotton items at a nominal temperature of 20 °C.	9	8	7
+PRE WASH	Adds a preliminary washing process before starting the COTTON cycle.	5.5 5 4.5
QUICK WASH	For lightly soiled garments in less than 2.0 kg that you want to wash quickly.	2	2	2
MIXED LOAD • For mixed load consisting of cotton and synthetic. 4.5 4 3
WOOL	The wool course features gentle cradling and soaking to protect the wool fibres from shrinkage/distortion.A neutral detergent is recommended.	3	2	2
COLOURS	For dark-coloured items made of cotton, synthetic materials or blended fabrics.	4.5 4 3.5
BABY CARE	Featuring a high-temperature wash and extra rinses to help remove the remaining detergent effectively.	4.5 4 3.5
ECO 40-60	For cleaning normally soiled cotton items which are declared to be washable at 40 °C or 60 °C, together in the same cycle. This cycle is used to assess the compliance with the EU Ecodesign legislation.This cycle is set as a default.	9	8	7
COTTON	Optimal performance with lower energy for cotton fabrics, bed linens, table linens, underwear, towels, or shirts.	9	8	7

English

Operations

Cycle Description		Max load (kg)
		9 kg model	8 kg model	7 kg model
SYNTHETICS	For blouses or shirts that are made of polyester (diolen, trevira), polyamide (perlon, nylon), or the like.	4.5 4 3.5
INTENSIVE	For heavily soiled items. The operation time is longer than other cycles.	9	8	7
RINSE+SPIN	Featuring an additional rinse process after applying fabric softener to the laundry.	9	8	7
DRAIN/SPIN	Featuring an additional spin process to effectively remove moisture from laundry.	9	8	7
DRUM CLEAN	Cleans the drum by removing dirt and bacteria from it.Make sure the drum is empty.Do not use any cleaning agents for cleaning the drum.	-	-	-

NOTE

• Loading the household washing machine or the household washer-dryer up to the capacity indicated by the manufacturer for the respective programmes will contribute to energy and water savings.
• The noise and remaining moisture content are influenced by the spinning speed: the higher the spinning speed in the spinning phase, the higher the noise and the lower the remaining moisture content.
• The most efficient cycle in terms of energy consumption are generally those that perform at lower temperatures and longer duration.

Delay End

You can set the washing machine to finish your wash automatically at a later time, choosing a delay of between 3 to 24 hours (in 1 hour increments). The hour displayed indicates the time the wash will finish.

1. Select a cycle. Then change the cycle settings if necessary.
2. Press Delay End repeatedly until a desired end time is set.
3. Press Start/Pause.

The corresponding indicator turns on with the clock running.

1. To cancel the Delay End, restart the washing machine by pressing Power.

Real-life case

You want to finish a two-hour programme 3 hours later from now. For this, you add the Delay End option to the current cycle with the 3-hour setting, and press Start/Pause at 2:00 p.m. Then, what happens? The washing machine starts operating at 3:00 p.m., and ends at 5:00 p.m. Provided below is the time line for this example.

Settings

Child Lock

To prevent accidents by children, Child Lock locks all buttons except for Power ⏻.

• To activate or deactivate the Child Lock function, press and hold Temp. 🔊 and Spin Ⓐ simultaneously for 3 seconds. When Child Lock is activated, the indicator lights up.

Alarm Off

You can turn on or off the sound of the cycle selector and all buttons.

- To turn on or off the sound, press and hold Spin Ⓐ and Delay End ⚫ simultaneously for 3 seconds. When the sound is off, the 🔒 indicator lights up.

Maintenance

Keep the washing machine clean to prevent deteriorated performance and to preserve its life cycle.

Emergency drain

In case of a power failure, drain the water inside the drum before taking out the laundry.

1. Power off and unplug the washing machine from the electrical outlet.
2. Open the filter cover (A) with tools such as a coin according to the direction of the graphic.

1. Put an empty, spacious container around the cover, and stretch the emergency drain tube to the container while holding the tube cap (B).

1. Open the tube cap and let water in the Emergency drain tube (C) flow into the container.
2. When done, close the tube cap, and reinsert the tube. Then, close the filter cover.

NOTE

Use a spacious container because the water in the drum may be more than expected.

Cleaning

Surface of the washing machine

Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the washing machine.

Mesh filter

Clean the mesh filter of the water hose once or twice a year.

1. Turn off the washing machine, and unplug the power cord.
2. Close the water tap.
3. Loosen and disconnect the water hose from the back of the washing machine. Cover the hose with a cloth to prevent water from gushing out.
4. Use pliers to pull out the mesh filter from the inlet valve.
5. Submerge the mesh filter deeply in water so that the threaded connector is also submerged.
6. Dry the mesh filter completely in the shade.
7. Reinsert the mesh filter into the inlet valve, and reconnect the water hose to the inlet valve.
8. Open the water tap.

NOTE

If the mesh filter is clogged, an information code of "4C" appears on the screen.

Maintenance

Debris filter

It is advisable to clean the debris filter 5 or 6 times a year to prevent its clogging.

1. Turn off the washing machine, and unplug the power cord.
2. Drain the remaining water inside the drum. See the "Emergency drain" section.
3. Open the filter cover(A) with tools such as a coin.
4. Turn the debris filter knob to the left, and drain off the remaining water.

1. Clean the debris filter using soft brushes. Make sure the drain pump propeller inside the filter is unclogged.
2. Reinsert the debris filter, and turn the filter knob to the right.

NOTE

If the debris filter is clogged, an information code of "5C" appears on the screen.

CAUTION

• Make sure the filter knob is closed properly after cleaning the filter. Otherwise, this may cause a leak. - Make sure the filter is inserted properly after cleaning it. Otherwise, this may cause an operational failure or a leak.

Detergent Drawer

1. While holding down the release lever on the inner of the drawer, slide open the drawer.
2. Remove the Liquid detergent guide from the drawer.

1. Clean the drawer components in water using a soft brush.

1. Clean the drawer recess using a bottle brush to remove detergent residues and limescale on the drawer recess.
2. Reinsert the Liquid detergent guide to the drawer.
3. Slide the drawer inward to close it.

NOTE

To remove remaining detergent, perform the RINSE+SPIN cycle with the drum being empty.

Maintenance

Recovery from freezing

The washing machine may freeze when it drops below 0\ °C .

1. Turn off the washing machine, and unplug the power cord.
2. Pour warm water over the water tap to loosen the water hose.
3. Disconnect the water hose, and soak it in warm water.
4. Pour warm water into the drum and leave it for about 10 minutes.
5. Reconnect the water hose to the water tap.

NOTE

If the washing machine still doesn't operate normally, repeat the above steps until it operates normally.

Care against an extended time of disuse

Avoid leaving the washing machine unused for an extended time. If this is the case, drain the washing machine and unplug the power cord.

1. Turn the Cycle Selector to select RINSE+SPIN.
2. Empty the drum, and press Start/Pause.
3. When the cycle is complete, close the water tap and disconnect the water hose.
4. Turn off the washing machine, and unplug the power cord.
5. Open the door to let air circulate through the drum.

Checkpoints

If you encounter a problem with the washing machine, first check the table below and try the suggestions.

Problem Action
Does not start.	Make sure the washing machine is plugged in.Make sure the door is properly closed.Make sure the water taps are open.Make sure to press or tap Start/Pause to start the washing machine.Make sure Child Lock is not activated.Before the washing machine starts to fill, it will make a series of clicking noises to check the door lock and does a quick drain.Check the fuse or reset the circuit breaker.
Water supply is insufficient, or no water is supplied.	Fully open the water tap.Make sure the door is properly closed.Make sure the water supply hose is not frozen.Make sure the water supply hose is not kinked or clogged.Make sure there is sufficient water pressure.
After a cycle, detergent remains in the detergent drawer.	Make sure the washing machine is running with sufficient water pressure.Make sure the detergent is added to the centre of the detergent drawer.Make sure the rinse cap is inserted properly.If using powder detergent, make sure the detergent selector is in the upper position.Remove the rinse cap and clean the detergent drawer.
Excessive vibrations or makes noise.	Make sure the washing machine is installed on a level, solid floor that is not slippery.If the floor is not level, use the levelling feet to adjust the height of the washing machine.Make sure the shipping bolts are removed.Make sure the washing machine is not contacting any other object.Make sure the laundry load is balanced.The motor can cause noise during normal operation.Overalls or metal-decorated clothes can cause noise while being washed. This is normal.Metal objects such as coins can cause noise. After washing, remove these objects from the drum or filter case.

Troubleshooting

Problem Action
Does not drain and/ or spin.	Make sure the drain hose is straightened all the way to the drain system.If you encounter a drain restriction, call for service.Make sure the debris filter is not clogged.Close the door and press or tap Start/Pause. For your safety, the washing machine will not tumble or spin unless the door is closed.Make sure the drain hose is not frozen or clogged.Make sure the drain hose is connected to a drain system that is not clogged.If the washing machine is not supplied with sufficient power, the washing machine temporarily will not drain or spin.As soon as the washing machine regains sufficient power, it will operate normally.Spinning does not work.Make sure laundry is spread out evenly.Make sure the washing machine is on a flat, stable surface.Redistribute the load. If only one item of clothing needs washing, such as a bathrobe or pair of jeans, the final spin result might be unsatisfactory, and an “Ub” check message will be shown in the display.
The door does not open.	Press or tap Start/Pause to stop the washing machine.It may take a few moments for the door lock mechanism to disengage.Make sure all the water in the drum is drained.The door may not open if water remains in the drum. Drain the drum and open the door manually.Make sure the door lock light is off. The door lock light turns off after the washing machine has drained.
Excessive suds.	Make sure you use the recommended types of detergent as appropriate.Use high efficiency (HE) detergent to prevent oversuding.Reduce the detergent amount for soft water, small loads, or lightly soiled loads.Non-HE detergent is not recommended.
Cannot apply additional detergent.	Make sure the remaining amount of detergent and fabric softener is not over the limit.
Machine stops.	Plug the power cord into a live electrical outlet.Check the fuse or reset the circuit breaker.Close the door and press the Start/Pause button to start the washing machine.For your safety, the washing machine will not tumble or spin unless the door is closed.Before the washing machine starts to fill, it will make a series of clicking noises to check the door lock and does a quick drain.There may be a pause or soak period in the cycle. Wait briefly and the washing machine may start.Make sure the mesh filter of the water supply hose at the water taps are not clogged. Periodically clean the mesh filter.If the washing machine is not supplied with sufficient power, the washing machine temporarily will not drain or spin. As soon as the washing machine regains sufficient power, it will operate normally.
Fills with the wrong water temperature.	Fully open both taps.Make sure the temperature selection is correct.Make sure the hoses are connected to the correct taps. Flush water lines.Make sure the water heater is set to supply a minimum 120 °F (49 °C) hot water at the tap. Also, check the water heater capacity and recovery rate.Disconnect the hoses and clean the mesh filter. The mesh filter may be clogged.While the washing machine fills, the water temperature may change as the automatic temperature control feature checks incoming water temperature. This is normal.While the washing machine fills, you may notice just hot and/or just cold water going through the dispenser when cold or warm temperatures are selected.This is a normal function of the automatic temperature control feature as the washing machine determines the water temperature.
Load is wet at the end of a cycle.	Use the High or Extra High spin speed.Use high efficiency (HE) detergent to reduce oversuding.Load is too small. Small loads (one or two items) may become unbalanced and not spin completely.Make sure the drain hose is not kinked or clogged.

Troubleshooting

Problem Action
Leaks water.	Make sure the door is properly closed.Make sure all hose connections are tight.Make sure the end of the drain hose is correctly inserted and secured to the drain system.Avoid overloading.Use high efficiency (HE) detergent to prevent oversudsing.
Has odours.	Excessive suds collect in recesses and can cause foul odours.Run cleansing cycles to sanitize periodically.Clean the door seal (diaphragm).Dry the washing machine interior after a cycle has finished.
No bubbles are seen (ecobubbleTM models only).	Overloading may screen bubbles.Severely contaminated laundry may not generate bubbles.

If a problem persists, contact a service center. The number of the service center is on the label attached to the product.

Information codes

If the washing machine fails to operate, you may see an information code on the screen. Check the table below and try the suggestions.

Code Action
4C	Water is not supplied.Make sure the water taps are open.Make sure the water hoses are not clogged.Make sure the water taps are not frozen.Make sure the washing machine is operating with sufficient water pressure.Make sure that the cold water tap and the hot water tap are properly connected.Clean the mesh filter as it may be clogged.
5C	Water is not draining.Make sure the drain hose is not frozen or clogged.Make sure the drain hose is positioned correctly, depending on the connection type.Clean the debris filter as it may be clogged.Make sure the drain hose is straightened all the way to the drain system.If the information code remains, contact a customer service centre.
dC	Operating the washing machine with the door open.Make sure the door is properly closed.Make sure laundry is not caught in the door.
dC1	Door cannot be locked.Make sure the door is properly closed.Turn off the washing machine, and then turn it on again.If the information code remains, contact a customer service centre.
OC	Water is overflowed.Restart after spinning.If the information code remains on the display, contact a local Samsung service centre.
LC	Check the drain hose.Make sure the end of the drain hose is not placed on the floor.Make sure the drain hose is not clogged.If the information code remains, contact a customer service centre.
3C	Check the motor for operation.Try restarting the cycle.If the information code remains, contact a customer service centre.

Troubleshooting

Code Action
TC1	Water heating temperature sensor needs to be checked.If the information code remains, contact a customer service centre.
HC	High temperature heating checkIf the information code remains, contact a customer service centre.
1C	The water level sensor is not working properly.Try power off and restarting the cycle.If the information code remains, contact a customer service centre.
AC	Check communications between main and sub PBAs.Try power off and restarting the cycle.If the information code remains, contact a customer service centre.
AC6	Inverter communication checkIf the information code remains, contact a customer service centre.

If any information code keeps appearing on the screen, contact a local Samsung service centre.

Specifications

Fabric care chart

The following symbols provide garment care directions. The care labels include four symbols in this order: washing, bleaching, drying and ironing (and dry cleaning when necessary). The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow the care label directions to maximize garment life and reduce laundry problems.

	Resistant material Do not iron
	Delicate fabric Can be dry cleaned using any solvent
	Item can be washed at 95 °C Dry Clean	○
	Item can be washed at 60 °C	◎	Dry clean with perchloride, lighter fuel, pure alcohol or R113 only
	Item can be washed at 40 °C	◎	Dry clean with aviation fuel, pure alcohol or R113 only
	Item can be washed at 30 °C Do not dry clean
	Hand wash only Dry flat	-
	Dry clean only Can be hung to dry	■
	Can be bleached in cold water Dry on clothes hanger
	Do not bleach Tumble dry, normal heat	◎
	Can be ironed at 200 °C max Tumble dry, reduced heat
	Can be ironed at 150 °C max Do not tumble dry
	Can be ironed at 100 °C max

English 53

Specifications

Protecting the environment

• This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the door so that animals and small children cannot get trapped inside the appliance.
• Do not exceed the detergent quantities recommended in the detergent manufacturer's instructions. • Use stain removal products and bleaches before the wash cycle only when strictly necessary.
• Save water and electricity by only washing full loads (the exact amount depends upon the program used).

Spare parts guarantee

We guarantee that the following spare parts will be available to professional repairers and end-users for a minimum period of 10 years after placing the last unit of the model on the market.

• Door, door hinges and seals, other seals, door locking assembly, and plastic peripherals such as detergent dispensers.
• Listed parts can be purchased at below website. -http://www.samsung.com/support

Specification sheet

“*” Asterisk(s) means variant model and can be varied (0-9) or (A-Z).

Type Front loading washing machine
Model name WW9*T304*** WW8*T304*** WW7*T302***
Dimensions	A (Width) 595 mm 595		mm 595 mm
	B (Height) 850 mm 850		mm 850 mm
	C (Depth) 505 mm 465		mm 440 mm
	D 563 mm 523 mm		498 mm
	E 978 mm 938 mm		913 mm
Water pressure 0.05 - 1.0 MPa
Net weight 64.0 kg 58.0 kg 57.0 kg
Maximum load capacity		Washing and spinning	9.0 kg	8.0 kg	7.0 kg
Power consumption	Washing and heating	AC 220-240 V / 50 Hz	1800-2100 W
Spin revolutions			1400 rpm	1400 rpm	1200 rpm

Type Front loading washing machine
Model name			WW8*T301***	WW7*T301***
Dimensions	A (Width)		595 mm 595 mm
	B (Height) 850 mm		850 mm
	C (Depth)		465 mm	440 mm
	D		523 mm 498 mm
	E		938 mm 913 mm
Water pressure 0.05 - 1.0 MPa
Net weight			59.0 kg	58.0 kg
Maximum load capacity		Washing and spinning	8.0 kg	7.0 kg
Power consumption	Washing and heating	AC 220-240 V / 50 Hz	1850-2100 W
Spin revolutions			1200 rpm	1200 rpm

NOTE

1. The design and specifications are subject to change without notice for quality improvement purposes.
2. The energy label specifications have been determined by using the following program according to EN 60456.

- The program is ◯COTTON 60 °C and ◯COTTON 40 °C.

Specifications

In accordance with applicable energy labelling regulations

“*” Asterisk(s) means variant model and can be varied (0-9) or (A-Z).

Samsung
Model Name WW9*T304*** WW8*T304***
Capacity kg 9.0 8.0
Energy Efficiency on a scale from D (least efficient) to A+++ (most efficient)		A+++	A+++
Annual energy consumption (It is based on 220 standard washing cycles for standard cotton course at 60 °C and 40 °C at full and partial load, and the consumption of off and left-on modes. Actual energy consumption will depend on how the appliance is used.)	kWh/yr 196 177
Energy Consumption
The standard 60 °C cotton programme at full load kWh 0.87 0.89
The standard 60 °C cotton programme at partial load kWh 0.86 0.72
The standard 40 °C cotton programme at partial load kWh 0.84 0.69
Weighted power consumption of the off-mode.	W 0.48	0.48
Weighted power consumption of the left-on mode.	W 5.00 5.00
Annual water consumption (It is based on 220 standard washing cycles for standard cotton course at 60 °C and 40 °C at full and partial load. Actual water consumption will depend on how the appliance is used.)	L/yr	11500	11500
Spin efficiency class
Spin-drying efficiency class on a scale from G (least efficient) to A (most efficient)		B	B
Maximum Spin Speed	rpm 1400	1400
Residual moisture	% 53	53
The □Cotton 60 °C and □Cotton 40 °C programs are the 'standard cotton 60 °C program' and the 'standard cotton 40 °C program'. They are suitable to clean normally soiled cotton laundry and they are the most efficient (concerning water and energy consumption) for this type of laundry. In these programs the actual water temperature may differ from the declared temperature.
Program duration of the standard program
The standard 60 °C cotton programme at full load	min	307 340
The standard 60 °C cotton programme at partial load	min	305 322
The standard 40 °C cotton programme at partial load	min	294	312
The duration of the left-on mode (TI)	min	13	13
Airborne acoustical noise emissions expressed in dB(A) re 1 pW and rounded to the nearest integer during the washing and spinning phases for the standard 60 °C cotton programme at full load;
Wash	dB (A) re 1 pW	62	62
Spin	dB (A) re 1 pW	75	75
Free Standing

NOTE

From 1 March 2021, an energy label with the range of A+++ to D is only valid in non-EU countries which have not adopted EU rescaled energy labelling regulations.

In accordance with applicable energy labelling regulations

“*” Asterisk(s) means variant model and can be varied (0-9) or (A-Z).

Samsung
Model Name WW7*T302*** WW8*T301***
Capacity kg 7.0 8.0
Energy Efficiency on a scale from D (least efficient) to A+++ (most efficient)		A+++	A+++
Annual energy consumption (It is based on 220 standard washing cycles for standard cotton course at 60 °C and 40 °C at full and partial load, and the consumption of off and left-on modes. Actual energy consumption will depend on how the appliance is used.)	kWh/yr 170 194
Energy Consumption
The standard 60 °C cotton programme at full load kWh 0.90 0.90
The standard 60 °C cotton programme at partial load kWh 0.65 0.83
The standard 40 °C cotton programme at partial load kWh 0.64	0.83
Weighted power consumption of the off-mode.	W 0.48	0.48
Weighted power consumption of the left-on mode.	W 5.00	5.00
Annual water consumption (It is based on 220 standard washing cycles for standard cotton course at 60 °C and 40 °C at full and partial load. Actual water consumption will depend on how the appliance is used.)	L/yr	10600	11500
Spin efficiency class
Spin-drying efficiency class on a scale from G (least efficient) to A (most efficient)		B	B
Maximum Spin Speed	rpm 1200	1200
Residual moisture	%	53	53
The □Cotton 60 °C and □Cotton 40 °C programs are the 'standard cotton 60 °C program' and the 'standard cotton 40 °C program'. They are suitable to clean normally soiled cotton laundry and they are the most efficient (concerning water and energy consumption) for this type of laundry. In these programs the actual water temperature may differ from the declared temperature.
Program duration of the standard program
The standard 60 °C cotton programme at full load	min	340	378
The standard 60 °C cotton programme at partial load	min	320	348
The standard 40 °C cotton programme at partial load	min	320	348
The duration of the left-on mode (TI)	min	13	13
Airborne acoustical noise emissions expressed in dB(A) re1 pW and rounded to the nearest integer during the washing and spinning phases for the standard 60 °C cotton programme at full load;
Wash	dB (A) re 1 pW	62	65
Spin	dB (A) re 1 pW	75	78
Free Standing

NOTE

From 1 March 2021, an energy label with the range of A+++ to D is only valid in non-EU countries which have not adopted EU rescaled energy labelling regulations.

English

Specifications

In accordance with applicable energy labelling regulations

“*” Asterisk(s) means variant model and can be varied (0-9) or (A-Z).

Samsung
Model Name WW7*T301***
Capacity kg 7.0
Energy Efficiency on a scale from D (least efficient) to A+++ (most efficient)		A+++
Annual energy consumption (It is based on 220 standard washing cycles for standard cotton course at 60 °C and 40 °C at full and partial load, and the consumption of off and left-on modes. Actual energy consumption will depend on how the appliance is used.)	kWh/yr 174
Energy Consumption
The standard 60 °C cotton programme at full load kWh 0.78
The standard 60 °C cotton programme at partial load kWh 0.77
The standard 40 °C cotton programme at partial load kWh 0.77
Weighted power consumption of the off-mode. W 0.48
Weighted power consumption of the left-on mode. W 5.00
Annual water consumption (It is based on 220 standard washing cycles for standard cotton course at 60 °C and 40 °C at full and partial load. Actual water consumption will depend on how the appliance is used.)	L/yr 10600
Spin efficiency class
Spin-drying efficiency class on a scale from G (least efficient) to A (most efficient)		B
Maximum Spin Speed rpm 1200
Residual moisture	%	53
The Cotton 60 °C and Cotton 40 °C programs are the 'standard cotton 60 °C program' and the 'standard cotton 40 °C program'. They are suitable to clean normally soiled cotton laundry and they are the most efficient (concerning water and energy consumption) for this type of laundry. In these programs the actual water temperature may differ from the declared temperature.
Program duration of the standard program
The standard 60 °C cotton programme at full load	min	378
The standard 60 °C cotton programme at partial load	min	348
The standard 40 °C cotton programme at partial load	min	348
The duration of the left-on mode (TI)	min	13
Airborne acoustical noise emissions expressed in dB(A) re 1 pW and rounded to the nearest integer during the washing and spinning phases for the standard 60 °C cotton programme at full load;
Wash	dB (A) re 1 pW	65
Spin	dB (A) re 1 pW	78
Free Standing

NOTE

From 1 March 2021, an energy label with the range of A+++ to D is only valid in non-EU countries which have not adopted EU rescaled energy labelling regulations.

Information of main washing programmes

Model name Program		Temperature (°C)	Capacity (kg)	Program Time (min)	Residual Moisture Content (%)	Water Consumption (L/cycle)	Energy Consumption (kWh/Cycle)
WW9*T304***	COTTON 20 4	5 66 56 53 0.3
	COTTON	40 4.5 29	4 53 48 0.84
		60	4.5 305 5	3 48 0.86
			9.0 307 5	3 55 0.87
	SYNTHETICS 40	4.5 60 35	60 0.65
WW8*T304***	COTTON 20 4	0 66	56 50 0.25
	COTTON	40 4.0 312		53	50 0.69
		60	4.0 322 5	3 50 0.72
			8.0	340 53 54	0.89
	SYNTHETICS 40	4.0 60	35 58 0.63
WW7*T302***	COTTON 20 3	5 66 65 52 0.2
	COTTON	40 3.5 320	53 45 0.64
		60	3.5 320 5	3 45 0.65
			7.0 340 5	3 52 0.90
	SYNTHETICS 40	3.5 60	35 52 0.6
WW8*T301***	COTTON 20 4	0 69	65 52 0.25
	COTTON	40 4.0	348 5	3 50 0.83
		60	4.0	348 53	50 0.83
			8.0	378	53	54 0.90
	SYNTHETICS 40	4.0 63 35 58 0.78
WW7*T301***	COTTON 20 3	5 69 65 52 0.25
	COTTON	40 3.5	348 5	3 45 0.77
		60	3.5	348 53 45	0.77
			7.0	378 53 52	0.78
	SYNTHETICS 40	3.5 63 35 52 0.78

The values on the table have been measured under the conditions specified in Standard IEC60456/EN60456. Mutual values will depend on how the appliance is used.

English 59

Indicative information (According to EU 2019/2023)

Model Program		Capacity (kg)	Program Time (HH:MM)	Energy Consumption (kWh/Cycle)	Water Consumption (L/cycle)	Maximum Temperature (°C)	Remaining Moisture Content (%)	Spinning Speed (RPM)
WT9*T3*4***	ECO 40-60	9.0 218	1.0568 59.909	49.1 49.7 1432
		4.5 166	0.708442 32.365	45.5 51.1 1433
		2.5 167	0.344426 28.373	26.2 52 1433
	COTTON 20°C	9.0	73	0.0822929	66.645	22.2	69.4	815
	COTTON 60°C	9.0	124	1.27683	69.811	51.0	74	813
	INTENSIVE 60°C (for Heavy Soiled Laundry)	9.0	138	1.27401	64.692	51.0	74.7	812
	SYNTHETICS	4.0	60	0.226859	52.490	25.8	75.1	814
	QUICK WASH	2.0	24	0.0244138	25.575	18.0	84.2	815
WT8*T3*4***	ECO 40-60	8.0 210	1.03457 51.682	46.2	50.9 1427
		4.0 161	0.717662	31.316 42.7	50.3	1429
		2.0 161	0.326	884 22.718	27.8 52.1 1429
	COTTON 20°C	8.0	76	0.0820249	61.304	23.3	71	813
	COTTON 60°C	8.0	119	1.12529	60.854	49.8	72	812
	INTENSIVE 60°C (for Heavy Soiled Laundry)	8.0 127	17734	56.692 50.6 73	813
	SYNTHETICS	4.0	56	0.261334	47.936	26.0	74.2	813
	QUICK WASH	2.0	22	0.0215143	23.016	18.4	82.5	812
WT8*T3*1***	ECO 40-60	8.0	207 1.2065	54.989 43.4	51.4 1229
		4.0 158	0.7203 39.144 36.3	50.8	1229
		2.0	155	0.5366	33.98	27.7	50.5	1229
	COTTON 20°C	8.0	76	0.140679	60.438	21.8	75.3	817
	COTTON 60°C	8.0	116	0.921573	49.32	50.1	73.5	819
	INTENSIVE 60°C (for Heavy Soiled Laundry)	8.0	132	1.31176	58.49	49.2	75.6	815
	SYNTHETICS	4.0	58	0.280567	45.176	26.8	72.3	818
	QUICK WASH	2.0	21	0.0387267	20.276	17.1	78.9	817
WT7*T3*2***	ECO 40-60	7.0 197	0.902273 49.558	39.5 48.5 1232
		3.5 157	0.578437 30.425	35.3 50.6 1227
		2.0 157	0.320018 25.558	26.7 51.1 1227
	COTTON 20°C 7.0	69	0.0746634	56.261	24.0	70.6	810
	COTTON 60°C 7.0	119	1.07016	57.160	49.6	74.7	812
	INTENSIVE 60°C (for Heavy Soiled Laundry)	7.0	134	1.11110	54.801	50.1	75.9	814
	SYNTHETICS	4.0	57	0.23449	45.458	26.2	78.8	810
	QUICK WASH	2.0	22	0.0199492	21.624	15.2	79.2	810
WT7*T3*1***	ECO 40-60	7.0	201	1.19332	47.08	42.9	51.0	1215
		3.5 155	0.685838 32.904	35.5 50.6	1217
		2.0	155	0.487225	28.523	28.2	51.0	1218
	COTTON 20°C	7.0	76	0.149581	59.972	25.1	74.7	804
	COTTON 60°C 7.0	134 0.782253	46.761 42.9	73.5 803
	INTENSIVE 60°C (for Heavy Soiled Laundry)	7.0	151	1.29578	52.504	50.0	77.1	802
	SYNTHETICS	4.0	74	0.340442	45.117	26.8	75.1	804
	QUICK WASH	2.0	23	0.0393385	20.900	18.0	75.3	804

The values on the table have been measured under the conditions specified in Standard IEC60456/EN60456. Actual values will depend on how the appliance is used.

EPREL information

To access the EPREL registration of the model:

1. Go to https://eprel.ec.europa.eu
2. Get the model identifier from the energy label of the product and type it in the search box
3. Energy Labelling information of the model is shown * You can directly access the product information via QR code on the rating label on your product.

Contact information

QUESTIONS OR COMMENTS?

COUNTRY CALL OR VISIT US ONLINE AT
UK 0333 000	0333 www.samsung.com/uk/support
IRELAND (EIRE) 0818	717100 www.samsung.com/ie/support
GERMANY 06196	77 555 77 www.samsung.com/de/support
FRANCE 01 48 63	00 00 www.samsung.com/fr/support
SPAIN 91 175 00	15 www.samsung.com/es/support
PORTUGAL 808 207	267 www.samsung.com/pt/support
LUXEMBURG	261 03 710	www.samsung.com/be_fr/support
NETHERLANDS	088 90 90 100	www.samsung.com/nl/support
BELGIUM	02-201-24-18	www.samsung.com/be/support(Dutch)www.samsung.com/be_fr/support(French)
NORWAY	21629099	www.samsung.com/no/support
DENMARK	707 019 70 www.samsung.com/dk/support
FINLAND	030-6227 515	www.samsung.com/fi/support
SWEDEN	0771 726 786	www.samsung.com/se/support
AUSTRIA	0800 72 67 864 (0800-SAMSUNG)	www.samsung.com/at/support
SWITZERLAND	0800 726 786	www.samsung.com/ch/support(German)www.samsung.com/ch_fr/support(French)
HUNGARY	0680SAMSUNG (0680-726-7864)	www.samsung.com/hu/support
CZECH	800 - SAMSUNG (800-726786)	www.samsung.com/cz/support
SLOVAKIA	0800 - SAMSUNG (0800-726 786)	www.samsung.com/sk/support
CROATIA	072 726 786	www.samsung.com/hr/support
BOSNIA	055 233 999	www.samsung.com/ba/support
North Macedonia	023 207 777	www.samsung.com/mk/support
MONTENEGRO	020 405 888	www.samsung.com/support
SLOVENIA	080 697 267 (brezplačna številka)	www.samsung.com/si/support
SERBIA	011 321 6899	www.samsung.com/rs/support
Kosovo	0800 10 101 www.samsung.com/support
ALBANIA	045 620 202 www.samsung.com/al/support
BULGARIA	*3000 Цена на един градски разговор0800 111 31 Безплатен за всички оператори	www.samsung.com/bg/support
ROMANIA	*8000 (apel in retea)08008-726-78-64 (08008-SAMSUNG)Apel GRATUIT Atenție: Dacă efectuați apelul din rețeaua Digi (RCS/RDS),vă rugăm să ne contactați formând numărul Telverde fără ultimele două cifre, astfel: 0800872678.	www.samsung.com/ro/support
ITALIA 800-SAMSUNG (800.7267864) www.samsung.com/it/support
CYPRUS 8009 4000 only from landline, toll free		www.samsung.com/gr/support
GREECE	80111-SAMSUNG (80111 726 7864) only from land line([phone] from mobile and land line
POLAND	801-172-678* lub [phone]** (opłata według taryfy operatora)	http://www.samsung.com/pl/support/
LITHUANIA 8-800-77777 www.samsung.com/lt/support
LATVIA 8000-7267 www.samsung.com/lv/support
ESTONIA 800-7267 www.samsung.com/ee/support

SAMSUNG

CE

Washing machine

User manual

WW9*T30**** / WW8*T30**** / WW7*T30****

SAMSUNG

Contents

Safety information 4

Information about safety instructions 4

! WARNING

1. Loosen the four adapter screws with a Phillips screwdriver.

NOTE

WARNING

Installation

WARNING

Water pipe (only for applicable models)

NOTE

CAUTION!

01 Release key

04 Door

CAUTION!

When installing the product, ensure that the support legs do not press on the power cord.

CAUTION!

1. Remove the adapter (A) from the water hose (B).

1. Loosen the four screws on the adapter with a Phillips screwdriver.

Over the edge of the sink

1. Place the capsule on top of the laundry in the drum.

CAUTION!

NOTE

CAUTION!