FLX-DANTE - Uncategorized Appsys ProAudio - Free user manual and instructions
Find the device manual for free FLX-DANTE Appsys ProAudio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dante Audio Interface / Converter |
| Brand | Appsys ProAudio |
| Model | FLX-DANTE |
| Dimensions (W x H x D) | 19 x 1.75 x 6 inches (483 x 44 x 152 mm) |
| Weight | Approx. 2 kg (4.4 lbs) |
| Power Supply | Power over Ethernet (PoE) IEEE 802.3af or external 12V DC |
| Audio Channels | 2-channel balanced analog I/O (XLR) / 4-channel Dante |
| Sample Rate | Up to 96 kHz |
| Bit Depth | 24-bit |
| Latency | Less than 1 ms |
| Audio Connectors | 2x XLR combo (mic/line), 2x XLR line out, 1x RJ45 Dante |
| Network Protocol | Dante (AES67 compatible) |
| Mounting | 1U rackmount (brackets included) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Primary Function | Convert analog audio to/from Dante digital audio network |
| Configuration | Via Dante Controller software (PC/Mac) |
| Maintenance & Cleaning | Wipe with a soft dry cloth. Do not use liquids or solvents. |
| Safety | Use only supplied power adapter. Keep away from moisture and heat. |
| Spare Parts & Repairability | No user-serviceable parts. Contact authorized service center for repairs. |
| Warranty | 2 years limited warranty |
Frequently Asked Questions - FLX-DANTE Appsys ProAudio
How do I connect the FLX-DANTE to my network?
Connect the RJ45 Dante port to your network switch using a standard Ethernet cable. Ensure the switch supports PoE if you want to power the device via the network, otherwise use the external 12V DC adapter.
What software is needed to configure the device?
Use Dante Controller software (free from Audinate) on a PC or Mac to route audio and configure device settings.
Can the FLX-DANTE work with AES67?
Yes, the device supports AES67 interoperability, allowing it to communicate with other AES67-compatible devices on the network.
What is the maximum sample rate?
The FLX-DANTE supports sample rates up to 96 kHz with 24-bit depth.
How many analog inputs and outputs does it have?
It has 2 analog inputs (XLR combo) and 2 analog outputs (XLR line out).
Can I use a standard Ethernet cable?
Yes, use a Cat5e or Cat6 Ethernet cable for best performance. For PoE, ensure the cable supports PoE.
What do the LED indicators mean?
The front panel LEDs show Power, Link (network connection), and Signal (audio activity). Refer to the manual for detailed descriptions.
Is the device rackmountable?
Yes, it is 1U rackmount and comes with rack ears. It can also be used on a desktop.
How do I update the firmware?
Firmware updates are performed via Dante Firmware Update Manager over the network. Download the latest firmware from the Appsys ProAudio website.
What should I do if there is no audio output?
Check the Dante Controller routing, ensure the device is powered and network cables are connected. Verify that the input source is active and the output volume is not muted.
User questions about FLX-DANTE Appsys ProAudio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual FLX-DANTE - Appsys ProAudio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FLX-DANTE by Appsys ProAudio.
USER MANUAL FLX-DANTE Appsys ProAudio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Appsys ProAudio
Model : FLX-DANTE
Category : Uncategorized