Protect It! TLM506USBC - Power strip Tripp Lite - Free user manual and instructions
Find the device manual for free Protect It! TLM506USBC Tripp Lite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surge Protected Power Strip |
| Brand | Tripp Lite |
| Model | Protect It! TLM506USBC |
| Number of AC Outlets | 6 |
| Outlet Type | NEMA 5-15R (North American standard) |
| USB Ports | 2 USB-C ports (charges up to 2.4A each) |
| Rated Voltage | 120 V AC |
| Rated Current | 15 A |
| Maximum Power | 1800 W |
| Protection Energy | 500 joules (estimated) |
| Power Cord Length | 1.5 meters |
| Switch | Yes, on/off switch with built-in circuit breaker |
| Indicator Light | Green LED indicating protection is working |
| Dimensions (L x W x H) | 35 x 6 x 5 cm |
| Weight | 0.5 kg |
| Material | Flame retardant plastic |
| Color | Black |
| Maintenance and Cleaning | Clean with a dry, soft cloth. Do not use liquid or abrasive products. |
| Safety | Surge protection and resettable circuit breaker. For indoor use only, do not overload. |
| Spare Parts and Repairability | No user-serviceable parts. Do not open. |
| Warranty | Limited lifetime manufacturer warranty |
| Intended Use | Protection and power supply for home or office electronic equipment |
Frequently Asked Questions - Protect It! TLM506USBC Tripp Lite
How to plug in the Protect It! TLM506USBC?
Plug the power cord into a standard wall outlet (120 V). Make sure the switch is in the OFF position before plugging in your devices. Then, turn the switch to ON. The green LED should light up to indicate surge protection is active.
What to do if the protection indicator does not light up?
If the green LED does not light up, check that the power strip is properly plugged in and the switch is ON. If the LED remains off, it may indicate that the protection has been compromised (e.g., after a major surge). In this case, replace the power strip immediately.
What is the maximum supported power?
The maximum power is 1800 W (120 V x 15 A). Do not exceed this limit to avoid overloading. Check the total consumption of your devices before plugging them in.
Can I plug a power strip into another power strip?
No, it is not recommended to plug one power strip into another (daisy chaining). This can cause overloading and fire hazard. Always plug the power strip directly into a wall outlet.
How to clean this power strip?
Unplug the power strip before cleaning. Use a dry, soft cloth to wipe the surface. Never use liquid products, aerosols, or abrasive cleaners.
Is this model compatible with a French plug?
No, this model is designed for US outlets (NEMA 5-15). For use in France, you will need a travel adapter. However, the voltage in France (230 V) is higher than the rated voltage (120 V), which could damage the device. Only use this adapter if your devices support universal voltage (100-240 V).
What is the difference between a surge protector and a standard power strip?
A standard power strip only distributes electricity without protection. The Protect It! TLM506USBC incorporates a surge protector that absorbs surges (up to 500 joules) and protects your devices. It also has a circuit breaker that cuts off the circuit in case of overload.
Is the power cord removable?
No, the power cord is fixed and cannot be detached. Its length is about 1.5 meters, which is sufficient for most setups.
What to do if the circuit breaker trips?
If the circuit breaker trips (the switch automatically turns OFF), unplug all devices and reduce the load. Wait a few minutes, then reset the switch to ON. If the problem persists, check that you are not exceeding 15 A or 1800 W.
How to benefit from the warranty?
Tripp Lite's limited lifetime warranty covers manufacturing defects. Keep your proof of purchase. To make a claim, contact Tripp Lite customer service via their website. The warranty does not cover damage caused by misuse or extreme surge.
User questions about Protect It! TLM506USBC Tripp Lite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Power strip in PDF format for free! Find your manual Protect It! TLM506USBC - Tripp Lite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Protect It! TLM506USBC by Tripp Lite.
USER MANUAL Protect It! TLM506USBC Tripp Lite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tripp Lite
Model : Protect It! TLM506USBC
Category : Power strip