TAC-18CHSD/TPH11IT - Air Conditioning TCL - Free user manual and instructions
Find the device manual for free TAC-18CHSD/TPH11IT TCL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Split air conditioner |
| Cooling capacity | 18,000 BTU/h (5.28 kW) |
| Heating capacity | 18,000 BTU/h (5.28 kW) |
| Indoor unit dimensions (W×H×D) | 970 × 300 × 224 mm |
| Outdoor unit dimensions (W×H×D) | 845 × 695 × 335 mm |
| Indoor unit weight | 12 kg |
| Outdoor unit weight | 38 kg |
| Power supply | 220–240 V / 50 Hz / 1 phase |
| Rated power input (cooling) | 1,650 W |
| Energy efficiency (EER/COP) | 3.2 / 3.4 |
| Refrigerant type | R32 |
| Air flow (indoor unit) | 650 m³/h |
| Noise level (indoor unit) | 30–45 dB(A) |
| Noise level (outdoor unit) | 55 dB(A) |
| Operating modes | Cool, Heat, Dry, Fan, Auto |
| Control | Remote control with LCD display |
| Timer | 24-hour on/off timer |
| Filter type | Washable mesh filter |
| Maintenance | Clean filter every 2 weeks; clean coils annually |
| Safety features | Overheat protection, auto restart, compressor delay |
| Spare parts availability | Remote control, filters, fan motor, PCB |
| Warranty | 5 years on compressor, 1 year on parts |
Frequently Asked Questions - TAC-18CHSD/TPH11IT TCL
How often should I clean the air filter?
Clean the washable mesh filter every 2 weeks under normal usage. More frequent cleaning may be needed if the unit is used in dusty environments.
What is the recommended temperature setting for cooling?
For optimal comfort and energy savings, set the thermostat between 24°C and 26°C (75°F–79°F) in cooling mode.
Can I use the air conditioner in winter?
Yes, this model features a heat pump that provides heating. It operates efficiently in outdoor temperatures down to -7°C (19°F).
The remote control is not working. What should I do?
Check the batteries first. Replace them with fresh AAA alkaline batteries. Ensure nothing is blocking the signal between the remote and the indoor unit. If the problem persists, contact support.
How do I use the timer function?
Press the TIMER button on the remote. Use the +/- buttons to set the desired time (1–24 hours). Press TIMER again to confirm. The unit will turn on or off accordingly.
What does the 'Dry' mode do?
Dry mode removes excess humidity from the air without cooling it significantly. The fan runs at low speed and the compressor cycles on/off to dehumidify.
Why is water leaking from the indoor unit?
This could be due to a clogged drain pipe or a dirty filter. Clean the filter and check the drain pipe for blockages. If the issue continues, call a technician.
How do I switch between Celsius and Fahrenheit?
While the unit is off, press and hold the MODE and FAN buttons simultaneously for 3 seconds. The display will toggle between °C and °F.
Is professional installation required?
Yes, this split air conditioner must be installed by a qualified technician to ensure proper refrigerant handling, electrical connections, and drainage.
What does the 'Auto' mode do?
In Auto mode, the unit automatically selects the appropriate mode (Cool, Heat, or Fan) based on the room temperature relative to the setpoint.
User questions about TAC-18CHSD/TPH11IT TCL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual TAC-18CHSD/TPH11IT - TCL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TAC-18CHSD/TPH11IT by TCL.
USER MANUAL TAC-18CHSD/TPH11IT TCL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TCL
Model : TAC-18CHSD/TPH11IT
Category : Air Conditioning