TAC-09CSD/XA82I - Air Conditioning TCL - Free user manual and instructions
Find the device manual for free TAC-09CSD/XA82I TCL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split system air conditioner |
| Cooling Capacity (BTU/h) | 9,000 |
| Cooling Capacity (kW) | 2.6 |
| Power Supply | 220-240V ~ 50Hz |
| Rated Power Input (Cooling) | 750 W |
| Current (Cooling) | 3.5 A |
| Refrigerant | R32 |
| Noise Level Indoor (Low/High) | 27 / 38 dB(A) |
| Noise Level Outdoor | 56 dB(A) |
| Indoor Unit Dimensions (WxHxD) | 780 x 250 x 190 mm |
| Outdoor Unit Dimensions (WxHxD) | 720 x 495 x 250 mm |
| Indoor Unit Weight | 8.5 kg |
| Outdoor Unit Weight | 22.0 kg |
| Recommended Room Area | 20-30 m² |
| Energy Efficiency Class (Cooling) | A++ |
| SEER | 6.8 |
| Functions | Cool, Dehumidify, Fan, Turbo, Sleep, Timer, Eco, Swing |
| Fan Speeds | 3 + Auto |
| Remote Control | Included (Infrared) |
| Air Filter Type | Washable mesh filter |
| Refrigerant Lines (Gas/Liquid) | 1/4" (6.35 mm) / 3/8" (9.52 mm) |
| Max. Pipe Length | 15 m |
| Max. Height Difference | 10 m |
| Operating Temperature Range (Cooling) | 16°C - 30°C |
| Accessories | Remote control, batteries, installation template, drainage hose, user manual |
Frequently Asked Questions - TAC-09CSD/XA82I TCL
How often should I clean the air filters?
Clean the washable mesh filters every two weeks under normal usage. More frequently in dusty environments. Refer to the user manual for removal and cleaning instructions.
Can I use the air conditioner without the remote control?
Yes, most TCL units have a manual control button on the indoor unit (usually behind the front panel). It allows basic on/off and mode selection.
What does the 'Turbo' mode do?
Turbo mode forces the compressor and fan to operate at maximum speed to quickly reach the set temperature. It runs for up to 30 minutes before returning to normal operation.
Why is water leaking from the indoor unit?
Possible causes: dirty filter blocking airflow, clogged drain pipe, or improper installation. Check and clean the filter, ensure the drain hose is not bent or blocked, and level the unit.
What is the recommended cooling temperature for energy saving?
Set your thermostat to 24-26°C (75-78°F) for optimal energy efficiency. Each degree lower increases energy consumption by about 6-8%.
Does this model have a heater?
The TAC-09CSD/XA82I is a cooling-only unit. It does not provide heating. For heating, look for a reverse cycle model (heat pump).
How do I reset the error code?
Turn off the unit with the remote, unplug the power cord for 30 seconds, and plug it back in. If the error persists, consult the manual for specific codes or contact TCL support.
What is the maximum distance between indoor and outdoor units?
The maximum pipe length is 15 meters, and the maximum height difference is 10 meters. Longer runs require additional refrigerant and may reduce efficiency.
How do I activate the Sleep mode?
Press the Sleep button on the remote. The unit will gradually adjust the temperature (usually +1°C after 1 hour, +2°C after 2 hours) for a comfortable sleep and lower energy use.
Can I install the unit myself?
Installation requires professional skills (refrigerant handling, electrical work, drainage). Improper installation voids warranty and may cause safety hazards. Always hire a certified technician.
User questions about TAC-09CSD/XA82I TCL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual TAC-09CSD/XA82I - TCL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TAC-09CSD/XA82I by TCL.
USER MANUAL TAC-09CSD/XA82I TCL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TCL
Model : TAC-09CSD/XA82I
Category : Air Conditioning