HGVI4582D10J7714GS - Dishwasher Hanseatic - Free user manual and instructions
Find the device manual for free HGVI4582D10J7714GS Hanseatic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | Hanseatic |
| Model | HGVI4582D10J7714GS |
| Dimensions (H x W x D) | 84.5 cm x 59.8 cm x 55 cm |
| Weight | 37 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Energy Efficiency Class | A+ |
| Annual Energy Consumption | 295 kWh |
| Annual Water Consumption | 3360 liters |
| Number of Place Settings | 12 |
| Number of Programs | 6 |
| Programs | ECO, Auto, Intensive, Quick, Glass, Rinse |
| Key Features | Delay Start, Half Load, Child Lock, Overflow Protection |
| Noise Level | 48 dB(A) |
| Drying Performance | Extra Dry Option |
| Filter System | Triple Filter, Self-Cleaning |
| Adjustable Racks | Upper Rack Height Adjustment |
| Spare Parts Availability | Yes, through authorized service centers |
| Installation Type | Fully Integrated |
| Safety Certifications | CE, VDE |
Frequently Asked Questions - HGVI4582D10J7714GS Hanseatic
How do I install the dishwasher?
Ensure the space matches dimensions (84.5x59.8x55 cm). Connect water inlet to cold water supply, drain hose to sink outlet, and plug into a grounded outlet. For detailed steps, refer to the installation guide.
What should I do if the dishwasher doesn't start?
Check if the door is fully closed and latched. Ensure power supply is active and the delay start option (if set) hasn't been activated. Also verify the water supply is turned on.
How do I clean the filters?
Remove the lower rack, unscrew the cylindrical filter (held by a handle), and rinse under running water. Clean the flat filter as well. Reassemble and ensure the fine filter is properly seated.
Why are dishes not drying properly?
The Extra Dry option might be off or the rinse aid dispenser is empty. Check the rinse aid level and refill if needed. Also, ensure the final rinse temperature is adequate.
How do I use the delay start function?
Press the Delay Start button repeatedly to select a delay (1-24 hours). The display shows the time. Close the door; the program will start after the delay. The cycle begins automatically.
What does error code E15 mean?
Error E15 indicates a water leak detection system activation. Turn off the water supply and unplug the dishwasher. Check for leaks under the appliance. If no leak, reset by unplugging for 30 seconds.
Can I open the door during a cycle?
Yes, but the cycle will pause immediately. Close the door firmly; the cycle resumes after a few seconds. Avoid opening during high-temperature phases to prevent steam burns.
How do I set the child lock?
Press and hold the Child Lock button (usually marked with a key icon) for 3 seconds until the indicator lights up. Repeat to unlock. This prevents children from changing settings.
What type of detergent should I use?
Use a quality dishwasher detergent (powder, gel, or tablets). For best drying results, also use rinse aid. Do not use hand dishwashing liquid as it causes excessive foaming.
Where can I find spare parts?
Spare parts are available through Hanseatic authorized service centers. You can also order online via the manufacturer's website using the model number HGVI4582D10J7714GS.
User questions about HGVI4582D10J7714GS Hanseatic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual HGVI4582D10J7714GS - Hanseatic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HGVI4582D10J7714GS by Hanseatic.
USER MANUAL HGVI4582D10J7714GS Hanseatic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hanseatic
Model : HGVI4582D10J7714GS
Category : Dishwasher