Mimetik M - Effect machine Sagitter - Free user manual and instructions
Find the device manual for free Mimetik M Sagitter in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Effect Machine (Fog/Smoke Machine) |
| Brand | Sagitter |
| Model | Mimetik M |
| Dimensions (Approx.) | 350 x 250 x 200 mm |
| Weight (Approx.) | 4.5 kg |
| Power Supply | AC 220-240V 50/60Hz |
| Power Consumption | 1000W |
| Heater Type | Block heater with high-grade stainless steel |
| Fluid Tank Capacity | 1.5 L |
| Fluid Consumption | Approx. 100 ml/min at full output |
| Warm-Up Time | Approx. 4 minutes |
| Maximum Fog Output | 300 m³/min |
| Control Methods | Remote control (included), DMX512, manual control panel |
| DMX Channels | 1 or 3 channels (selectable) |
| Operating Temperature Range | 5°C to 40°C |
| Safety Features | Thermal fuse, automatic shut-off, low fluid detection |
| Maintenance | Clean nozzle and tank regularly; use only recommended fluid |
| Spare Parts Available | Remote control, fuse, fluid tank cap, heater element |
| Reparability | Replaceable fuse and heater; professional service recommended |
| Compatible Fluid | Sagitter fluid (water-based) only |
| Certifications | CE, RoHS |
| Included Accessories | Remote control, user manual, hanging bracket |
| Recommended Use | Indoor stage, theater, nightclub |
Frequently Asked Questions - Mimetik M Sagitter
What kind of fluid should I use?
Only use Sagitter water-based fog fluid for optimal performance and to prevent clogging.
How do I clean the machine?
Run a cleaning solution (distilled water with a little vinegar) through the system after every 20 hours of use. Also wipe the exterior with a damp cloth.
Why is the machine not producing fog?
Check if the fluid tank is filled, the machine is warmed up (green LED on), and the remote is connected properly. If still no output, check the fuse.
Can I use DMX control?
Yes, the Mimetik M supports DMX512. Use channel 1 for continuous fog and channel 2 for timer/intervals (if 3-channel mode). Refer to the manual for addressing.
How do I replace the fuse?
Disconnect power, locate the fuse holder near the power cord. Use a screwdriver to open it and replace the blown fuse with an identical one (T10A/250V).
What is the warm-up time?
Approximately 4 minutes. The heater LED will stop blinking and stay on when ready.
Max continuous operation time?
The machine can run continuously for about 15 minutes at full output before needing a cool-down period. For longer use, reduce output or use timer mode.
My remote control stopped working. What to do?
Check if the remote cable is firmly connected to the machine and that the remote’s battery (if wireless) is charged. If using wired remote, test with a spare remote.
Is the machine safe to use indoors?
Yes, but ensure proper ventilation. Do not block air vents. The fog fluid is non-toxic, but avoid direct inhalation. Install the machine on a stable surface.
How do I store the machine?
Empty the fluid tank and run the machine dry to clear residual fluid. Store in a cool, dry place upright. Cover to protect from dust.
User questions about Mimetik M Sagitter
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual Mimetik M - Sagitter and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mimetik M by Sagitter.
USER MANUAL Mimetik M Sagitter
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sagitter
Model : Mimetik M
Category : Effect machine