Color Smoke 900FC - Effect machine Sagitter - Free user manual and instructions
Find the device manual for free Color Smoke 900FC Sagitter in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smoke Machine |
| Brand | Sagitter |
| Model | Color Smoke 900FC |
| Power Consumption | 900 W |
| Power Supply | AC 230V / 50 Hz |
| Warm-up Time | Approximately 3-4 minutes |
| Smoke Output | Continuous output, adjustable |
| Fluid Tank Capacity | 3 liters |
| Control Options | Remote control, DMX512 |
| Dimensions (L x W x H) | 500 x 300 x 300 mm |
| Weight | 8 kg |
| Fluid Consumption | ~100 ml/min at full output |
| Heater Type | High-efficiency heating element |
| Low Fluid Protection | Automatic shut-off when fluid runs low |
| Maintenance Interval | Clean every 30 hours of use |
| Recommended Fluid | Sagitter water-based smoke fluid |
| Safety Features | Thermal fuse, overheat protection |
| Spare Parts Available | Fuse, heater, pump, filter |
| Typical Applications | Concerts, theater, nightclubs |
| Warranty | 12 months (subject to terms) |
Frequently Asked Questions - Color Smoke 900FC Sagitter
What type of fluid should I use in the Color Smoke 900FC?
Use only high-quality water-based smoke fluid, preferably Sagitter brand or equivalent. Do not use oil-based or flammable fluids as they can damage the machine and create safety hazards.
How do I clean the smoke machine?
After every 30 hours of use, run a cleaning solution through the machine or follow the manual's maintenance procedure. Regularly wipe the exterior and check the heater for residue buildup.
Can I control the Color Smoke 900FC via DMX?
Yes, the machine supports DMX512 protocol. You can control smoke output and fan speed through a DMX controller. Refer to the manual for DMX channel mapping.
What is the warm-up time for this machine?
The warm-up time is approximately 3-4 minutes. The machine indicates readiness with an LED indicator.
What is the maximum smoke output?
At full output, the Color Smoke 900FC produces a dense, continuous smoke column with a consumption of about 100 ml/min. Output can be adjusted via remote or DMX.
Does the machine have a low fluid shut-off?
Yes, the unit automatically shuts off when the fluid level is low to prevent damage to the heater. This also helps maintain safety.
What is the covered area by the smoke output?
With a powerful fan, the smoke can cover up to 200 cubic meters depending on ventilation and output settings. The fan speed is adjustable via DMX.
How do I reset the thermal fuse?
If the thermal fuse trips due to overheating, let the machine cool down for 20 minutes. Then, check for blockages and ensure proper ventilation. The fuse resets automatically once cooled.
Can I use the machine outdoors?
The Color Smoke 900FC is designed for indoor use. Outdoor use may affect performance due to wind and temperature. Use only in sheltered areas with moderate conditions.
Where can I get spare parts?
Spare parts such as fuses, heaters, pumps, and filters are available from authorized Sagitter dealers or online. Use only genuine parts to ensure safety and longevity.
User questions about Color Smoke 900FC Sagitter
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual Color Smoke 900FC - Sagitter and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Color Smoke 900FC by Sagitter.
USER MANUAL Color Smoke 900FC Sagitter
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sagitter
Model : Color Smoke 900FC
Category : Effect machine