32HSV231 - TV ECG - Free user manual and instructions
Find the device manual for free 32HSV231 ECG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Television |
| Brand | ECG |
| Model | 32HSV231 |
| Screen Size (Diagonal) | 32 inches |
| Display Resolution | HD Ready (1366 x 768 pixels) |
| Display Type | LED |
| Refresh Rate | 60 Hz |
| Dimensions (W x H x D) without Stand | 730 x 430 x 80 mm |
| Weight without Stand | 4.5 kg |
| Power Consumption (Typical) | 50 W |
| Standby Power Consumption | < 0.5 W |
| Video Inputs | HDMI, VGA, Composite (RCA) |
| USB Ports | 1 x USB 2.0 |
| Audio Output | Headphone Jack, Coaxial (SPDIF) |
| TV Tuner | DVB-T/C |
| VESA Mount Pattern | 100 x 100 mm |
| Special Features | USB Media Playback, Electronic Programme Guide, Sleep Timer, Child Lock |
| Power Supply | AC 100-240 V, 50/60 Hz |
Frequently Asked Questions - 32HSV231 ECG
How do I connect the TV to an antenna?
Connect the antenna cable to the COAXIAL/Antenna input on the back of the TV. Then go to the Settings menu, select Channel, and run Auto Tuning to scan for available channels.
How can I set up the TV for the first time?
After turning on the TV, the Setup Wizard will guide you through language selection, country, and channel tuning. Follow the on-screen instructions to complete the initial setup.
How do I connect external devices via HDMI?
Plug the HDMI cable into one of the HDMI ports on the TV and the other end into your device. Then press the Source button on the remote and select the corresponding HDMI input.
How do I play media from a USB drive?
Insert the USB drive into the USB port. Press Source and select USB. The TV will display compatible files (video, audio, photos). Navigate using the remote to select and play.
How do I adjust the picture settings?
Press the Menu button, go to Picture settings. You can adjust Brightness, Contrast, Color, Sharpness, and select from preset modes like Standard, Movie, Sports, etc.
How do I reset the TV to factory settings?
Go to Settings > System > Reset or Factory Default. Confirm the reset. Note that all user settings and channels will be erased.
Can I mount the TV on a wall?
Yes, the TV is VESA compatible with a 100 x 100 mm pattern. Use a suitable wall mount kit and follow the instructions. Ensure the wall can support the TV's weight (4.5 kg).
How do I enable the child lock?
Press Menu, go to Lock or Parental Control. Set a PIN code and enable Child Lock. You can then block specific channels or inputs.
What should I do if there is no signal on the TV?
Check that the antenna or HDMI source is properly connected. Press Source and ensure the correct input is selected. If using antenna, run Auto Tuning again. If problem persists, try a different cable or device.
How do I update the TV software?
Go to Settings > System > Software Update. Select Online Update if connected to the internet, or USB Update after downloading the firmware from the ECG support website to a USB drive.
User questions about 32HSV231 ECG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your TV in PDF format for free! Find your manual 32HSV231 - ECG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 32HSV231 by ECG.
USER MANUAL 32HSV231 ECG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ECG
Model : 32HSV231
Category : TV