M4350-44M4X4V - Switch NETGEAR - Free user manual and instructions
Find the device manual for free M4350-44M4X4V NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Switch |
| Brand | Netgear |
| Model | M4350-44M4X4V |
| Ports | 44 x 10/100/1000BASE-T, 4 x 10G SFP+, 4 x 25G SFP28 |
| Switching Capacity | 336 Gbps |
| Forwarding Rate | 250 Mpps |
| VLAN Support | Up to 4094 VLANs |
| Layer | Layer 3 (routing) |
| Management | CLI, Web GUI, SNMP, SSH, Telnet |
| Power Supply | Internal, redundant optional (RPS) |
| Dimensions | 17.3 x 11.2 x 1.7 in (44 x 28.4 x 4.3 cm) |
| Weight | 12.5 lb (5.7 kg) |
| Power Consumption | 70W typical, 100W max |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Humidity | 5% to 95% noncondensing |
| Warranty | Limited Lifetime |
| Compliance | IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3ae, 802.3by |
| Features | Static routing, RIP, OSPF, VRRP, ACL, QoS, IGMP snooping, stacking |
Frequently Asked Questions - M4350-44M4X4V NETGEAR
How do I factory reset the Netgear M4350-44M4X4V switch?
Press and hold the Factory Reset button on the front panel for 10 seconds using a paperclip. The switch will reboot to factory defaults.
Does the M4350-44M4X4V support Power over Ethernet (PoE)?
No, the standard M4350-44M4X4V does not support PoE. PoE versions are available separately (e.g., M4350-44M4X4V-PoE).
How many VLANs can I configure?
The switch supports up to 4094 VLANs (802.1Q tagging).
What is the maximum switching capacity?
The switching capacity is 336 Gbps (line-rate).
Can I stack multiple M4350 switches?
Yes, the M4350 series supports Virtual Chassis stacking (up to 8 units) via dedicated stacking ports or uplink ports.
How do I update the firmware?
Download the latest firmware from Netgear's support site, then upload via the web interface under Maintenance > File Management or via TFTP.
What are the default login credentials?
Default username: admin, default password: password (or printed on the device label).
Does this switch support OSPF routing?
Yes, it supports OSPFv2 (IPv4) and OSPFv3 (IPv6) as part of its Layer 3 functionality.
How can I monitor network traffic?
Use mirroring/SPAN to duplicate traffic to a monitoring port, or enable sFlow for flow sampling.
What is the warranty period?
Netgear offers a Limited Lifetime Warranty for this switch, including hardware replacement.
User questions about M4350-44M4X4V NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual M4350-44M4X4V - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M4350-44M4X4V by NETGEAR.
USER MANUAL M4350-44M4X4V NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : M4350-44M4X4V
Category : Switch