XS516TM - Switch NETGEAR - Free user manual and instructions
Find the device manual for free XS516TM NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 10-Gigabit Ethernet Smart Managed Plus Switch |
| Ports | 16 x 10G Base-T (RJ45) |
| Dimensions (WxDxH) | 440 x 204 x 43 mm (17.32 x 8.03 x 1.69 in) |
| Weight | 3.18 kg (7.0 lb) |
| Power Supply | 100-240V AC, 50-60Hz, internal power supply |
| Power Consumption | 60W (maximum) |
| Fan | 2 built-in fans with smart fan control |
| Management | Web-based GUI, HTTP/HTTPS, SNMP v1/v2c/v3, CLI (telnet/SSH) |
| Layer 2 Features | VLAN (802.1Q), LACP, STP, IGMP Snooping, MLD Snooping |
| Quality of Service | 8 priority queues, IEEE 802.1p, DSCP |
| Security | MAC ACL, Port Security, DoS Prevention, 802.1X |
| Jumbo Frame Support | Up to 9K bytes |
| MAC Address Table | 16K entries |
| Switching Capacity | 320 Gbps |
| Forwarding Rate | 238 Mpps (64-byte packets) |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Operating Humidity | 10% to 90% (non-condensing) |
| Mounting | Rack-mountable (1U), desktop placement possible |
| LED Indicators | Power, Fan, Link/Activity per port, Speed |
| Included Accessories | Power cord, rack-mount brackets, rubber feet, installation guide |
Frequently Asked Questions - XS516TM NETGEAR
How do I access the web management interface of the Netgear XS516TM?
By default, the switch obtains an IP via DHCP. Use the Netgear Switch Discovery Tool to find its IP. Then open a browser and enter the IP. If DHCP fails, the default IP may be 192.168.0.239, with username admin and password password.
What is the default username and password for the XS516TM?
The default username is admin and the default password is password. It is strongly recommended to change the password after first login.
How do I reset the switch to factory default settings?
Press and hold the Factory Defaults button on the front panel for about 5 seconds using a paperclip. The switch will reboot with factory settings.
Can I use the XS516TM with 1GbE devices?
Yes, the switch is backward compatible with 1G and 100M devices. It will auto-negotiate the speed, but for optimal performance, use 10G-rated cables (Cat6a or higher).
What type of cables are recommended for 10G connections?
For 10GBase-T, use Cat6a or Cat7 cables up to 100 meters. Cat5e may work at shorter distances (up to 30-50m) but is not guaranteed.
The switch fan is loud. Is this normal?
The XS516TM has active cooling fans that adjust speed based on temperature. Under heavy load or in warm environments, fans may run faster and become audible. Ensure proper ventilation. If noise is excessive, check for obstructions.
How can I configure VLANs on the XS516TM?
Log into the web interface, go to Switching > VLAN. You can create 802.1Q VLANs and assign ports. The switch supports up to 256 VLANs.
Does the switch support link aggregation (LACP)?
Yes, it supports LACP (IEEE 802.3ad). You can create up to 8 LAG groups, each with up to 8 ports, via the web interface under Switching > LAG.
Why are some ports not connecting at 10G?
Check the cable quality and length. Ensure the connected device also supports 10G. Verify that the port speed is set to Auto. You can check the port status under Monitoring > Port Statistics.
How do I update the firmware on the XS516TM?
Download the latest firmware from Netgear Support. In the web interface, go to Maintenance > Firmware Upgrade, select the file, and apply. Do not power off during upgrade.
User questions about XS516TM NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual XS516TM - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XS516TM by NETGEAR.
USER MANUAL XS516TM NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : XS516TM
Category : Switch