GS752TPv3 - Switch NETGEAR - Free user manual and instructions
Find the device manual for free GS752TPv3 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit PoE+ Switch |
| Model Number | GS752TPv3 |
| Ports | 48 x Gigabit PoE+ (802.3af/at) + 4 x Gigabit SFP |
| PoE Budget | 384W total (up to 30W per port) |
| Switching Capacity | 104 Gbps |
| Forwarding Rate | 77.38 Mpps |
| MAC Address Table | 16K entries |
| VLAN Support | Up to 4096 VLANs (802.1Q) |
| Management Features | Web GUI, SNMP v1/v2c/v3, CLI, Telnet, SSH, RMON, sFlow |
| Dimensions (W x D x H) | 17.3 x 11.8 x 1.7 inches (440 x 300 x 43 mm) |
| Weight | 10.4 lbs (4.7 kg) |
| Power Supply | Internal AC 100-240V, 50-60Hz, 9A max |
| Power Consumption | Max 465W (including PoE) |
| Cooling | 2 x internal fans, variable speed |
| Operating Temperature | 32° to 122°F (0° to 50°C) |
| Safety Certifications | UL, CE, FCC Class A, RoHS |
| Included Accessories | Power cord, rack-mount kit, rubber feet, Quick Start Guide |
| Maintenance | Clean with a soft dry cloth; do not use liquids or solvents |
| Repair & Spare Parts | Contact Netgear support or authorized resellers; no user-serviceable parts inside |
| Warranty | Limited lifetime warranty (with product registration) |
Frequently Asked Questions - GS752TPv3 NETGEAR
How do I reset the GS752TPv3 to factory defaults?
Press and hold the Factory Reset button on the front panel for about 10 seconds until the LEDs blink. Alternatively, use the CLI command clear config and reboot.
What is the PoE budget of this switch?
The GS752TPv3 provides a total PoE power budget of 384 watts, with up to 30 watts per port (802.3at).
Does the switch support VLANs?
Yes, it supports up to 4096 VLANs using IEEE 802.1Q tagging. VLANs can be configured via the web interface or CLI.
Can I manage the switch via a web browser?
Yes, the switch has a built-in web-based management interface. Connect to its IP address (default 192.168.0.239) and log in with the default credentials (admin/password).
How do I update the firmware?
Download the latest firmware from Netgear's support site, then upload it via the Firmware Upgrade page in the web interface or using TFTP through CLI.
What SFP modules are compatible?
Use any standard Gigabit SFP transceiver (1000BASE-T, SX, LX, etc.). Netgear recommends its own brand modules for best compatibility.
Does the switch support link aggregation (LAG)?
Yes, it supports up to 26 LAG groups, each with up to 8 ports, using static configuration or LACP.
The switch fan is noisy. Can I control it?
The fans are variable speed and adjust based on temperature. You can enable fanless mode in the web interface if the load is low, but ensure proper ventilation.
How do I configure port security?
In the web interface, go to Security > Port Security. You can set maximum MAC addresses per port and specify allowed MAC addresses.
Where can I find the user manual?
The full user manual is available for free download at notice-facile.com or directly from Netgear's support page in PDF format.
User questions about GS752TPv3 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual GS752TPv3 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GS752TPv3 by NETGEAR.
USER MANUAL GS752TPv3 NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : GS752TPv3
Category : Switch