110S - Camera MINOX - Free user manual and instructions
Find the device manual for free 110S MINOX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subminiature camera |
| Film Format | 110 cartridge film |
| Lens | Minox Color 23mm f/2.8 |
| Focus | Zone focusing (0.9m, 2m, 5m, infinity) |
| Exposure Control | Programmed auto exposure (EV 7-17) |
| Flash | Built-in electronic flash (guide number 12 at ISO 100) |
| Shutter Speeds | 1/30 to 1/1000 sec (electronic) |
| Viewfinder | Bright frame with parallax marks |
| Film Advance | Automatic after shutter release |
| Power Source | Two 1.5V alkaline batteries (LR44 or SR44) |
| Dimensions | 108 x 28 x 18 mm |
| Weight | Approx. 100 g (without batteries) |
| Film Speed Range | ISO 100 to 400 (manual setting) |
| Self-Timer | Electronic, approx. 10 sec delay |
| Battery Check | LED indicator in viewfinder |
| Construction | Black anodized aluminum body with synthetic leather trim |
| Care & Maintenance | Clean lens with soft brush or cloth; store in dry place |
| Safety Warnings | Do not expose to extreme heat; keep away from children |
| Spare Parts & Repair | Limited availability; contact authorized service centers |
Frequently Asked Questions - 110S MINOX
What type of film does the Minox 110S use?
The Minox 110S uses 110 cartridge film, which is a subminiature format. Popular films include Kodak and Fuji brands.
How do I load the film into the camera?
Open the back by sliding the latch. Insert the 110 film cartridge with the film spool facing the take-up side. Close the back; the camera automatically advances to frame 1.
What batteries does the 110S require and how do I install them?
The camera uses two LR44 or SR44 alkaline batteries (1.5V). Open the battery compartment on the bottom, insert with correct polarity, and close the cover.
How do I set the film speed?
Slide the ISO selector on the camera to match the film's ISO value, typically 100, 200, or 400. The camera cannot automatically read DX coding.
How does the zone focusing work?
The lens has four focus zones: 0.9m (close), 2m (group), 5m (scene), and infinity (landscape). Set the symbol accordingly based on subject distance.
How do I use the built-in flash?
Press the flash button to raise the flash. It automatically charges and fires when needed. Remember to adjust focus for flash distances (under 3m).
What is the flash range?
The flash guide number is 12 at ISO 100, so effective range is approximately 1 to 3 meters depending on film speed.
How do I check the battery status?
When you press the shutter button halfway, look for a green LED in the viewfinder. If it lights, batteries are fine; if not, replace them.
What should I do if the shutter doesn't fire?
First check batteries. If they are fresh, ensure the film is not exhausted and the camera is not in mid-rewind. If problem persists, try resetting by removing and reinserting batteries.
How do I clean and maintain the Minox 110S?
Use a soft lens brush or microfiber cloth for the lens. Wipe the body with a damp cloth. Store in a dry, cool place. Remove batteries if not used for long periods.
User questions about 110S MINOX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual 110S - MINOX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 110S by MINOX.