M4350-24X8F8V - Switch NETGEAR - Free user manual and instructions
Find the device manual for free M4350-24X8F8V NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Switch |
| Model | M4350-24X8F8V |
| Brand | NETGEAR |
| Ports | 24 x 10GBASE-T (RJ45), 8 x 25G SFP28, 8 x 100G QSFP28 |
| Form Factor | 1U Rackmount |
| Dimensions (W x H x D) | 17.3 x 1.7 x 17.5 in (440 x 43 x 445 mm) |
| Weight | 15.4 lb (7.0 kg) |
| Power Supply | 100-240V AC, 50-60Hz, internal redundant optional |
| Max Power Consumption | 350 W |
| Management | Web GUI, CLI (Telnet/SSH), SNMP, NETGEAR Insight |
| Layer Support | L2/L3 (static routing, RIP, OSPF, VRRP) |
| VLAN Support | 802.1Q, up to 4094 VLANs |
| Stacking | Up to 8 units (physical or virtual) |
| Security Features | ACL, 802.1X, RADIUS, TACACS+, MAC filter |
| Cooling | Internal fans with variable speed |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Humidity | 5% to 95% (non-condensing) |
| Safety Certifications | CE, FCC, UL |
| Warranty | 5 years |
Frequently Asked Questions - M4350-24X8F8V NETGEAR
How to perform a factory reset on the M4350-24X8F8V?
Press and hold the Factory Reset button (located on the front panel) for 10 seconds using a paperclip. The switch will reboot and restore default settings.
What management interfaces are supported?
It supports web GUI, CLI via Telnet/SSH, SNMP, and NETGEAR Insight cloud management.
Can the switch be stacked?
Yes, up to 8 units can be stacked physically (via dedicated stacking ports) or virtually using VLT (Virtual Link Trunking).
Does the M4350-24X8F8V support Power over Ethernet (PoE)?
No, this model does not support PoE. All RJ45 ports are data-only 10GBASE-T.
How to update firmware?
Download the latest firmware from NETGEAR Support page. Upload via web GUI under Maintenance > Firmware Upgrade using TFTP or HTTP.
What is the default IP address of the switch?
The default IP is 192.168.0.239 with subnet mask 255.255.255.0. In the unlikely event this is changed, perform a factory reset.
How to clean the switch?
Disconnect power and use a soft, dry cloth to wipe the exterior. Do not use any liquids or compressed air near the vents.
What safety precautions should be taken?
Ensure proper ventilation (do not block fans), use a grounded power outlet, and install in a rack with adequate airflow.
Are spare parts or replacement power supplies available?
The internal power supply is not user-replaceable. For repairs, contact NETGEAR support or an authorized service center.
What is the maximum stacking bandwidth?
Each stacking link uses 100G QSFP28 ports, providing up to 200 Gbps aggregate bandwidth between stacked units.
User questions about M4350-24X8F8V NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual M4350-24X8F8V - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M4350-24X8F8V by NETGEAR.
USER MANUAL M4350-24X8F8V NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : M4350-24X8F8V
Category : Switch