ADAM-2 - Intercom RTS - Free user manual and instructions
Find the device manual for free ADAM-2 RTS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Intercom System |
| Brand | RTS |
| Model | ADAM-2 |
| Display | 7-inch TFT LCD color screen, 1024x600 pixels |
| Camera | 1/3" CMOS, 0.1 Lux, 170° wide angle |
| Audio | Full-duplex, echo cancellation |
| Door Release | Electric strike control (12V DC, max 500mA) |
| Connectivity | Wi-Fi 802.11 b/g/n, Ethernet RJ45 |
| Power Supply | DC 12V/2A (adapter included) or PoE (802.3af) |
| Dimensions (Monitor) | 215 x 155 x 25 mm |
| Dimensions (Door Station) | 130 x 70 x 40 mm |
| Weight (Monitor) | 450 g |
| Weight (Door Station) | 250 g |
| Memory | Supports up to 64 GB microSD card for snapshots/video |
| Motion Detection | PIR sensor, configurable sensitivity |
| Night Vision | Infrared LEDs, up to 5 meters |
| Weather Resistance (Door Station) | IP54, suitable for outdoor use |
| Mounting | Surface mount (monitor) and flush mount (door station) |
| Operating Temperature | -10°C to 50°C |
| Cleaning | Wipe with a soft, dry cloth; avoid solvents |
| Safety | Overvoltage protection, short circuit protected |
| Spare Parts / Repairability | Available: power adapter, door station, mounting brackets; user-replaceable |
Frequently Asked Questions - ADAM-2 RTS
How do I reset the ADAM-2 to factory defaults?
Press and hold the reset button on the bottom of the monitor for 10 seconds using a paper clip. The device will reboot and restore factory settings.
Can I connect multiple monitors to one door station?
Yes, the ADAM-2 supports up to 4 monitors via a dedicated bus connection. Refer to the manual for wiring details.
Does the intercom work with mobile phones?
Yes, the ADAM-2 can be paired with a smartphone app (available for iOS and Android) via Wi-Fi to answer calls and see visitors remotely.
What should I do if the screen is blank?
Check the power connection and ensure the adapter is plugged in. If using PoE, verify the switch provides power. A hard reset may help if the issue persists.
How do I adjust the volume on the monitor?
During a call or in the settings menu, use the + and - buttons on the side of the monitor to adjust speaker volume.
Can I record video from the door station?
Yes, insert a microSD card into the monitor. The system can record on motion detection or manually. Recordings are accessible via the app or the monitor's gallery.
What is the warranty period for the ADAM-2?
RTS offers a 2-year limited warranty from the date of purchase against manufacturing defects. Register your product online to extend to 3 years.
How do I mount the door station?
Use the included mounting template to drill holes. The door station fits a standard 60mm round back box. Secure with screws and seal edges with silicone for waterproofing.
Is PoE supported and how do I enable it?
Yes, the monitor supports IEEE 802.3af PoE. Simply connect an Ethernet cable from a PoE switch to the monitor's RJ45 port. No extra power adapter needed.
Why does the door station not ring?
Ensure the ringer switch on the back of the monitor is set to ON. Also verify that the door station is wired correctly and not in silent mode.
User questions about ADAM-2 RTS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Intercom in PDF format for free! Find your manual ADAM-2 - RTS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADAM-2 by RTS.
USER MANUAL ADAM-2 RTS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : RTS
Model : ADAM-2
Category : Intercom