PM-22 - Measuring equipment VOLTCRAFT - Free user manual and instructions
Find the device manual for free PM-22 VOLTCRAFT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Digital multimeter |
| Dimensions (L x W x H) | 150 x 70 x 30 mm |
| Weight | 200 g (with battery) |
| Power supply | 9V battery type 6LR61 |
| Display | LCD 3 1/2 digits, 2000 counts |
| Main functions | AC/DC voltage measurement, AC/DC current, resistance, continuity test, diode test |
| DC voltage measurement ranges | 0-600V (accuracy ±0.5%) |
| AC voltage measurement ranges | 0-600V (accuracy ±1.0%) |
| DC current measurement ranges | 0-10A (accuracy ±1.5%) |
| AC current measurement ranges | 0-10A (accuracy ±2.0%) |
| Resistance measurement ranges | 0-20MΩ (accuracy ±1.0%) |
| Safety category | CAT II 600V |
| Operating temperature | 0°C to 40°C |
| Storage temperature | -10°C to 50°C |
| Maintenance | Clean with a soft, dry cloth; replace the battery when the low battery symbol appears |
| Included accessories | Batteries, test leads, user manual |
| Warranty | 2 years |
Frequently Asked Questions - PM-22 VOLTCRAFT
How to turn on the VOLTCRAFT PM-22 multimeter?
Turn the rotary switch from OFF to the desired function (e.g., V for voltage). The device turns on automatically.
What battery does the PM-22 use and how to replace it?
The PM-22 uses a 9V battery type 6LR61. To replace it, remove the battery compartment cover on the back, insert the new battery observing polarity, then close the cover.
How to measure DC voltage with the PM-22?
Set the switch to the V DC range. Connect the black probe to COM and the red probe to VΩmA. Touch the test probes to the measurement points. Read the value on the display.
What does the 'OL' display mean on the PM-22?
The 'OL' (OverLoad) display indicates that the measured value exceeds the selected range. Select a higher range or stop the measurement to avoid damaging the device.
How to test continuity of a circuit with the PM-22?
Turn the switch to the continuity test symbol (diode/waves). Connect the probes as for a resistance measurement. If the resistance is less than about 50Ω, a beep sounds.
What is the safety category of the PM-22?
The PM-22 is certified CAT II 600V. It is suitable for measurements on circuits powered by a standard household installation, but not for primary distribution circuits.
How to clean the PM-22 multimeter?
Use a soft, dry cloth to wipe the casing. Never use solvents or abrasive products. Make sure the device is turned off and disconnected before cleaning.
Can I measure current above 10A with the PM-22?
No, the PM-22 supports a maximum of 10A in AC or DC current. Do not exceed this limit to avoid damaging the device or causing injury.
What to do if the PM-22 screen stays blank?
First check the battery: replace it if necessary. Make sure the switch is on an active measurement position. If the problem persists, contact customer service.
How to store the PM-22 when not in use?
Store the multimeter in a dry, temperate place (between -10°C and 50°C). Remove the battery if the device will not be used for an extended period to prevent leakage.
User questions about PM-22 VOLTCRAFT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual PM-22 - VOLTCRAFT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PM-22 by VOLTCRAFT.
USER MANUAL PM-22 VOLTCRAFT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : VOLTCRAFT
Model : PM-22
Category : Measuring equipment