HSFO 3T235 WC X - Dishwasher HOTPOINT - Free user manual and instructions
Find the device manual for free HSFO 3T235 WC X HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Dishwasher |
| Brand | Hotpoint |
| Model | HSFO 3T235 WC X |
| Built-in or freestanding | Freestanding |
| Width | 60 cm |
| Height | 85 cm |
| Depth | 60 cm |
| Net weight | 45 kg |
| Energy efficiency class | E (EU 2019/2017) |
| Annual energy consumption | 270 kWh |
| Water consumption per cycle | 10.5 L |
| Noise level | 49 dB(A) |
| Number of place settings | 13 |
| Number of programs | 6 |
| Programs | Eco, Intensive, Normal, Quick, Soak, Glass |
| Drying system | Natural convection |
| Water connection | Cold water only |
| Power consumption (off mode) | 0.5 W |
| Power consumption (standby) | 1.0 W |
| Delay start | Up to 24 hours |
| Self-cleaning filter | Yes |
| Child lock | Yes |
| Salt and rinse aid indicators | Yes |
| Adjustable rack | Top rack height adjustable |
| Cutlery basket | Removable, 2-fold |
| Inverter motor | Yes |
| Warranty | 2 years |
Frequently Asked Questions - HSFO 3T235 WC X HOTPOINT
How do I install the Hotpoint HSFO 3T235 WC X dishwasher?
Ensure the appliance is level and connected to a cold water supply with a pressure of 0.5-10 bar. Secure the drain hose to a sink siphon or standpipe. Electrical connection must be to a grounded outlet. Refer to the manual for detailed steps.
What detergent should I use?
Use a dishwasher detergent (powder, gel, or tablets) suitable for automatic dishwashers. Avoid using hand dish soap. For best results, use a detergent with rinse aid and salt.
Why is the dishwasher not starting?
Check if the door is properly closed and latched. Ensure the power cord is plugged in and the circuit breaker is not tripped. Also verify that the water supply is turned on. If the problem persists, contact service.
How do I clean the filter?
Remove the lower rack. Unscrew the filter assembly (usually a cylindrical filter and a flat mesh). Rinse under running water with a soft brush. Reassemble and screw back. Clean the filter regularly to maintain performance.
What does the error code F5 mean?
Error code F5 indicates a water heating issue. Check if the water inlet temperature is too low or if the heating element is faulty. Turn off the appliance and restart after 30 minutes. If it persists, call a technician.
Can I use rinse aid alternative?
Rinse aid improves drying and prevents spots. You can use a liquid rinse aid like Finish or store-brand. Adjust the dosage according to water hardness. Some tablets contain rinse aid, but adding separate rinse aid is recommended.
How do I reset the dishwasher?
To reset, turn off the appliance at the power switch or unplug it for 1 minute. Then plug back in and select a new program. If the display shows an error, press the reset button if available.
What is the maximum water temperature allowed?
The dishwasher is designed for cold water connection only (max 60°C). Do not connect to hot water supply as it may damage components.
How many place settings does the HSFO 3T235 WC X hold?
It holds up to 13 place settings, suitable for a small to medium household. Ideal for standard dinnerware and cutlery.
Where can I find spare parts?
Spare parts such as filters, spray arms, and racks are available from authorized Hotpoint service centers or online retailers. Use genuine parts for safety and performance. Check the user manual for part numbers.
User questions about HSFO 3T235 WC X HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual HSFO 3T235 WC X - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HSFO 3T235 WC X by HOTPOINT.