HSIC 3T127 UK N - Dishwasher HOTPOINT - Free user manual and instructions
Find the device manual for free HSIC 3T127 UK N HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dishwasher |
| Brand | Hotpoint |
| Model | HSIC 3T127 UK N |
| Dimensions (H x W x D) | 850 mm x 600 mm x 600 mm |
| Weight | 45 kg |
| Energy Efficiency Class | E (2019/2017 EU regulation) |
| Noise Level | 44 dB(A) re 1 pW |
| Number of Place Settings | 13 |
| Number of Programs | 6 |
| Programs | Eco 50°C, Intensive 65°C, Normal 60°C, Quick 30' 50°C, Soak, Auto 45-65°C |
| Additional Functions | Half Load, Delay Start (1-24 h), Extra Dry |
| Water Consumption per Cycle (Eco) | 9.5 L |
| Annual Energy Consumption (Eco) | 267 kWh |
| Plug Type | Type G (UK) |
| Water Connection | Cold water only, 3/4" threaded hose |
| Safety Features | Anti-flood system, child lock, overflow protection |
| Maintenance | Clean filters monthly, run cleaning cycle every 2 months, check salt and rinse aid levels |
| Spare Parts Availability | Genuine parts available through Hotpoint service network (at least 7 years) |
| Warranty | 1 year parts and labor (extended options available) |
Frequently Asked Questions - HSIC 3T127 UK N HOTPOINT
How do I properly load dishes for best cleaning?
Place heavily soiled items on the bottom rack, facing the spray arms. Place glasses and cups on the top rack. Ensure no items block the detergent dispenser or spray arms. Do not overload; leave space for water circulation.
What type of detergent should I use?
Use dishwasher detergent (tablets, powder, or gel). Do not use hand dish soap. For hard water, use detergent with built-in salt or add separate salt to the softener.
How often should I clean the filters?
Clean the coarse and fine filters every month or more often if you notice poor cleaning. Rinse under running water and remove any debris. Ensure filters are securely reinserted.
Why is my dishwasher not draining?
Check the drain hose for kinks or clogs. Clean the filter assembly. If still not draining, the drain pump may be blocked by small objects. Refer to the manual for pump cleaning instructions or contact service.
How do I install the dishwasher?
Ensure the location is level and near water supply, drain, and power. Connect inlet hose to cold water tap (3/4" thread). Securely attach drain hose to sink drain or standpipe. Level the dishwasher using adjustable feet. Plug into grounded outlet.
When and how should I add dishwasher salt?
Add salt when the low salt indicator lights up. Open the salt compartment cap, fill with special dishwasher salt, and wipe away any excess. Run a cycle immediately to avoid corrosion.
How do I adjust the rinse aid setting?
Open the rinse aid compartment. Adjust the dial (typically 1-6). Higher settings for harder water to reduce spotting. Start at 3 and adjust as needed.
What does an error code like 'E01' mean?
E01 indicates a water inlet problem. Check that water supply is on and inlet hose is not kinked. If code persists, the inlet valve may need service. Consult fault code table in manual.
How do I start a delayed wash?
Load dishes, add detergent, select a program. Press the Delay Start button repeatedly to set hours (1-24). Close door; the timer will count down and start automatically.
How can I save energy when using the dishwasher?
Use the Eco program for normally soiled dishes. Run full loads only. Scrape food off but do not pre-rinse. Use half load function when the dishwasher is not full. Air dry instead of heated dry.
User questions about HSIC 3T127 UK N HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual HSIC 3T127 UK N - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HSIC 3T127 UK N by HOTPOINT.