RSA5065N - Measuring equipment Rigol - Free user manual and instructions
Find the device manual for free RSA5065N Rigol in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Spectrum Analyzer |
| Brand | Rigol |
| Model | RSA5065N |
| Frequency Range | 9 kHz to 6.5 GHz |
| Resolution Bandwidth | 1 Hz to 10 MHz |
| Display | 10.1-inch touchscreen |
| Dimensions (WxHxD) | 350 x 210 x 110 mm |
| Weight | 4.2 kg |
| Power Supply | 100-240 VAC, 50/60 Hz, 45 W max |
| Main Functions | Spectrum analysis, EMI, modulation analysis, spectrogram |
| Maintenance | Clean with a soft, dry cloth. Avoid solvents. |
| Safety | Use grounded outlet; avoid static discharge; do not block vents. |
| Spare Parts & Repairability | Contact Rigol service center for replacement parts; no user-serviceable parts inside. |
| General Information | Includes LAN, USB, HDMI ports; supports remote control via SCPI commands. |
Frequently Asked Questions - RSA5065N Rigol
What is the frequency range of the RSA5065N?
The RSA5065N covers a frequency range from 9 kHz to 6.5 GHz, making it suitable for most wireless and RF applications.
How do I perform a factory reset?
To perform a factory reset, press the Utility key, then select System > Power On/Preset > Factory Default. Confirm the action.
Can I connect the RSA5065N to a PC?
Yes, you can connect via USB or Ethernet. The device supports USBTMC and VXI-11 protocols for remote control.
What is the maximum input power?
The maximum safe input power is +30 dBm (1 W) with the default attenuation. Use external attenuators for higher power.
How do I update the firmware?
Download the latest firmware from Rigol's website to a USB drive. Insert the drive, press Utility > File Explorer, select the file, and follow on-screen instructions.
Does the RSA5065N support modulation analysis?
Yes, the RSA5065N can analyze AM, FM, PM and basic digital modulations with optional software licenses.
How do I set up a limit line?
Press Trace > Limit > Edit. Define frequency and amplitude points. Enable the limit line to check compliance.
What is the displayed average noise level (DANL)?
The typical DANL at 1 GHz is -165 dBm/Hz with attenuation set to 0 dB and RBW of 1 Hz.
Can I save screenshots or traces?
Yes, press the Save/Recall key. Choose Screenshot or Trace and select a destination (USB or internal memory).
How often should I calibrate the RSA5065N?
Rigol recommends calibration every 2 years or after significant environmental changes. For high accuracy, annual calibration is advised.
User questions about RSA5065N Rigol
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual RSA5065N - Rigol and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RSA5065N by Rigol.
USER MANUAL RSA5065N Rigol
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rigol
Model : RSA5065N
Category : Measuring equipment