HAGER SPB365R - Circuit Breaker

SPB365R - Circuit Breaker HAGER - Free user manual and instructions

Find the device manual for free SPB365R HAGER in PDF.

📄 28 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice HAGER SPB365R - page 6
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Circuit breaker (MCB)
Brand Hager
Model SPB365R
Number of Poles 3
Rated Current (In) 63 A
Rated Voltage 230/400 V AC
Breaking Capacity 6 kA (IEC 60898-1)
Tripping Curve Type B (or C, depending on variant)
Mounting Type DIN rail (modular)
Width (modules) 3 modules (54 mm)
Dimensions (H x W x D) 81 x 54 x 73 mm
Weight Approx. 200 g
IP Protection IP20 (installed)
Operating Temperature -25°C to +60°C
Main Functions Overload and short-circuit protection
Maintenance No maintenance required; keep clean and dry
Safety Features Contact position indicator, padlockable toggle (optional)
Spare Parts & Repairability No user-serviceable parts; replace unit if faulty
General Information Complies with IEC 60898-1, suitable for residential and commercial use

Frequently Asked Questions - SPB365R HAGER

What is the rated current of the Hager SPB365R?
The Hager SPB365R has a rated current (In) of 63 A.
What is the breaking capacity of this circuit breaker?
The breaking capacity is 6 kA according to IEC 60898-1 standards.
How many poles does the SPB365R have?
It is a 3-pole circuit breaker.
Is the Hager SPB365R suitable for residential use?
Yes, it is designed for residential and light commercial applications, providing protection against overloads and short circuits.
What tripping curve does the SPB365R have?
The model typically has a Type B or Type C tripping curve. Check the marking on the device for confirmation.
How do I install the Hager SPB365R?
Snap the circuit breaker onto a DIN rail (35 mm). Connect the incoming and outgoing conductors to the terminals, ensuring proper torque. Always follow local electrical codes and switch off power before installation.
What is the operating voltage of the SPB365R?
The rated voltage is 230/400 V AC for single-phase and three-phase systems.
Does the SPB365R provide earth leakage protection?
No, this is a standard circuit breaker (MCB) and does not provide residual current protection. For earth leakage, use an RCD.
How many DIN modules wide is the Hager SPB365R?
It occupies 3 modules (54 mm width) on a DIN rail.
How do I reset the SPB365R after a trip?
First, identify and rectify the cause of the trip (overload or short circuit). Then, move the toggle switch to the OFF position and then back to ON. If it trips again, consult a qualified electrician.

User questions about SPB365R HAGER

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Circuit Breaker in PDF format for free! Find your manual SPB365R - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPB365R by HAGER.

USER MANUAL SPB365R HAGER

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : HAGER

Model : SPB365R

Category : Circuit Breaker