B3T68230 - Tumble drier BEKO - Free user manual and instructions
Find the device manual for free B3T68230 BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Beko |
| Model | B3T68230 |
| Installation Type | Freestanding |
| Loading Type | Front Load |
| Drying Technology | Heat Pump |
| Capacity (kg) | 8 |
| Energy Efficiency Class | A+++ |
| Annual Energy Consumption (kWh) | 234 |
| Noise Level (dB) | 65 |
| Dimensions (H x W x D) | 84.6 x 59.7 x 60.0 cm |
| Weight (kg) | 45 |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption (W) | 700 |
| Number of Programs | 15 |
| Key Programs | Cotton, Synthetics, Delicates, Mix, Shirts, Jeans, Time Dry, Refresh |
| Water Tank Capacity (L) | 4.5 |
| Filter Cleaning Indicator | Yes |
| Water Tank Full Indicator | Yes |
| Delay Timer | Yes, up to 24 hours |
| Reversible Door | Yes |
| Anti-Crease Function | Yes |
| Child Lock | Yes |
| Spare Parts Availability | 10 years |
Frequently Asked Questions - B3T68230 BEKO
How do I clean the lint filter?
Remove the filter from the door opening, open it, and remove all lint. Rinse the filter under running water if needed, then dry it thoroughly before reinstalling. Clean the filter after every cycle to maintain performance.
How often should I empty the water tank?
Empty the water tank after each drying cycle or when the water tank full indicator lights up. Remove the tank, empty it, and replace it securely.
What does the 'Filter Cleaning' light mean?
The filter cleaning indicator reminds you to clean the lint filter. If the light stays on even after cleaning, restart the dryer or check if the filter is properly installed.
Why is my drying cycle taking longer than usual?
Possible causes: the load is too large, the filter is clogged, the room temperature is low, or the condenser needs cleaning. Reduce load size and clean the filter to improve drying time.
Can I dry wool or silk items?
Only if the garment care label permits tumble drying. Use the Delicates or Wool program if available. Avoid high heat and remove items while slightly damp.
How do I activate the child lock?
Press and hold the child lock button (if present) for 3-5 seconds until the symbol appears. To deactivate, repeat the same process. Refer to your manual for exact button location.
What is the maximum load for a cotton program?
The maximum load for the Cotton program is 8 kg (the dryer's rated capacity). Overloading can reduce drying efficiency and increase energy consumption.
How do I install the dryer?
Place the dryer on a level, sturdy floor. Maintain at least 10 cm clearance on sides and rear for ventilation. The dryer is freestanding; no permanent installation required.
What type of detergent is used in the dryer?
No detergent is needed. The dryer uses heat and airflow to remove moisture. Do not add detergent or fabric softener directly, but you may use dryer sheets.
What should I do if the dryer stops mid-cycle?
Check if the lint filter is clogged, the water tank is full, or the door is open. Also inspect for error codes on the display. Restart the cycle after resolving the issue.
User questions about B3T68230 BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual B3T68230 - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. B3T68230 by BEKO.
USER MANUAL B3T68230 BEKO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEKO
Model : B3T68230
Category : Tumble drier