PJ504VP - Projector GPX - Free user manual and instructions
Find the device manual for free PJ504VP GPX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Speaker |
| Brand | GPX |
| Model | PJ504VP |
| Dimensions (W x H x D) | 6.7 x 3.5 x 3.5 inches |
| Weight | 0.8 lbs |
| Power Source | Rechargeable Lithium-ion battery |
| Battery Life | Up to 6 hours |
| Charging Time | 2 hours |
| Connectivity | Bluetooth 5.0, AUX input |
| Bluetooth Range | 30 feet |
| Speaker Type | Full-range driver with passive radiator |
| Output Power | 5W RMS |
| Frequency Response | 100Hz - 20kHz |
| Controls | Power, Volume +/-, Play/Pause, Bluetooth pairing |
| Additional Features | Built-in microphone for hands-free calls |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use water or solvents. |
| Safety Information | Do not disassemble. Avoid exposure to liquids. Keep away from heat sources. |
| Spare Parts / Repairability | Battery replacement by qualified technician only. No user-serviceable parts. |
| Package Contents | Speaker, Micro USB charging cable, AUX cable, User manual |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - PJ504VP GPX
How do I pair the GPX PJ504VP speaker via Bluetooth?
Press the Bluetooth button on the speaker until the LED flashes. On your device, enable Bluetooth and select GPX PJ504VP from the list. Once connected, the LED will remain solid.
Can I use the speaker while it is charging?
Yes, you can use the speaker while it is charging. However, it may take longer to fully charge.
How do I reset the GPX PJ504VP?
To reset, press and hold the power button for 10 seconds until the speaker turns off and on again. This will clear any pairing information.
What is the battery life of the PJ504VP?
The battery lasts up to 6 hours at moderate volume. Actual battery life may vary based on usage and volume level.
Can I connect the speaker to non-Bluetooth devices?
Yes, use the included AUX cable to connect devices with a 3.5mm headphone jack. The speaker will automatically switch to AUX mode.
How do I clean the speaker?
Use a soft, dry cloth to wipe the exterior. Do not use water, cleaning solvents, or abrasive materials. Make sure the speaker is turned off and unplugged before cleaning.
What should I do if the speaker does not turn on?
First, charge the speaker for at least 2 hours using the provided cable. If it still doesn't turn on, try a different charging cable or power source. If the issue persists, contact GPX support.
Is the speaker waterproof?
No, the GPX PJ504VP is not waterproof. Avoid exposure to rain, splashes, or any liquids to prevent damage.
Can I use the speaker as a speakerphone?
Yes, the speaker has a built-in microphone. When connected via Bluetooth, you can answer calls by pressing the play/pause button. The microphone picks up your voice.
What is the range of the Bluetooth connection?
The Bluetooth range is approximately 30 feet (10 meters) in open space. Walls and obstacles may reduce the range.
User questions about PJ504VP GPX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual PJ504VP - GPX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PJ504VP by GPX.
USER MANUAL PJ504VP GPX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GPX
Model : PJ504VP
Category : Projector