SXPW22E - Pressure washer STANLEY - Free user manual and instructions
Find the device manual for free SXPW22E STANLEY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric pressure washer |
| Brand | Stanley |
| Model | SXPW22E |
| Maximum pressure | 2200 PSI (150 bar) |
| Water flow rate | 1.8 GPM (6.8 L/min) |
| Power supply | 230 V ~ 50 Hz |
| Motor power | 1800 W |
| Nominal service pressure | 1900 PSI (130 bar) |
| Maximum water temperature | 60 °C |
| High pressure hose length | 10 m |
| Power cord length | 5 m |
| Dimensions (L x W x H) | 450 x 350 x 800 mm |
| Weight | 12 kg |
| Sound pressure level (LpA) | 75 dB(A) |
| Vibrations (handle) | < 2.5 m/s² |
| Main functions | High pressure washing, detergent application, rinsing |
| Safety | Automatic motor shutoff when trigger is released, safety lock |
| Maintenance and cleaning | Clean water inlet filter regularly, drain system in winter |
| Spare parts and repairability | Lance, nozzles, hose, filter, seals available |
| General information | Domestic use, do not use hot water >60°C |
Frequently Asked Questions - SXPW22E STANLEY
How to start the Stanley SXPW22E pressure washer?
Make sure the water supply is open and the hose is connected. Plug the appliance into a 230 V outlet. Unlock the trigger of the lance. Press the on/off switch to position 'I'. Hold the lance firmly and press the trigger to start the jet.
What type of detergent can I use with this pressure washer?
Use only detergents specifically formulated for pressure washers. The integrated detergent tank allows application at low pressure. Rinse thoroughly after use.
How to purge air from the system before use?
Before first use or after a long period of inactivity, open the water supply, press the trigger without plugging in the appliance to let air escape. Then plug in the appliance and use normally.
What to do if pressure is low or non-existent?
Check that the water inlet filter is not clogged, the hose is not kinked, and the nozzle is not blocked. Purge air from the system. If the problem persists, consult a professional.
Can I use hot water with the Stanley SXPW22E?
No, the maximum water temperature is 60 °C. Hotter water can damage the pump and void the warranty.
How to maintain the pump after use?
After each use, turn off the water supply, press the trigger to release residual pressure, then unplug the appliance. Clean the filter and store the pressure washer away from frost.
Which nozzle to use for effective cleaning?
Use an adjustable spray nozzle (0° to 40°) to adjust pressure. The rotary (turbo) nozzle is ideal for heavily soiled surfaces. Never use a nozzle with too small an orifice.
The motor stops and restarts by itself, is this normal?
Yes, the automatic shutoff system cuts the motor when the trigger is released to save energy and extend pump life. It restarts as soon as you press the trigger.
How to winterize the pressure washer?
Drain all water from the hose and pump by running the appliance briefly without water supply. Add a special pressure washer antifreeze. Store the appliance in a dry, frost-free place.
Where to find spare parts for the SXPW22E?
Spare parts (hoses, nozzles, seals, filters) are available from authorized Stanley dealers or on the official website. Always use genuine parts to ensure safety.
User questions about SXPW22E STANLEY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual SXPW22E - STANLEY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SXPW22E by STANLEY.
USER MANUAL SXPW22E STANLEY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STANLEY
Model : SXPW22E
Category : Pressure washer