UC029G - Saw MAKITA - Free user manual and instructions
Find the device manual for free UC029G MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Circular Saw |
| Brand | Makita |
| Model | UC029G |
| Nominal Voltage | 40 V max (XGT) |
| Battery Type | Li-ion XGT |
| Blade Diameter | 190 mm |
| Blade Arbor | 30 mm |
| Max Cutting Depth (at 90°) | 66 mm |
| Max Cutting Depth (at 45°) | 47 mm |
| No Load Speed | 4,500 rpm |
| Net Weight (without battery) | 4.5 kg |
| Dimensions (L x W x H) | 420 x 235 x 290 mm |
| Power Source | XGT Battery (not included) |
| Main Functions | Straight and angle cuts, laser guide, variable speed |
| Safety | Electric blade brake, spindle lock, two-finger trigger |
| Maintenance and Cleaning | Clean ventilation slots, lubricate blade periodically |
| Spare Parts and Repairability | Blade, battery, charger, cover, parallel guide |
| General Information | 2-year warranty, made in Japan |
Frequently Asked Questions - UC029G MAKITA
Which battery should I use with the Makita UC029G saw?
The Makita UC029G saw uses a XGT 40 V max battery from the Makita XGT series. BL4020, BL4025, BL4040, BL4050F batteries are compatible.
How to change the blade of the UC029G circular saw?
To change the blade, disconnect the battery, press the spindle lock, loosen the center screw with the supplied hex key, remove the outer flange and blade, then install the new blade in the correct rotation direction.
What is the maximum cutting depth of the UC029G?
The maximum cutting depth is 66 mm at 90° and 47 mm at 45°.
Does the UC029G saw have a blade brake?
Yes, the saw is equipped with an electric blade brake that stops the blade within seconds after releasing the trigger.
Can I use an LXT 18 V battery on the UC029G?
No, the UC029G is designed exclusively for XGT 40 V max batteries. LXT 18 V batteries are not compatible.
What is the recommended blade diameter?
The recommended blade diameter is 190 mm with a 30 mm arbor.
How to adjust the parallel guide on the UC029G?
Insert the parallel guide into the slots on the base, tighten the knobs to secure it at the desired distance. Check parallelism with the blade.
What to do if the saw does not start?
Check that the battery is charged and properly inserted. If the problem persists, clean the battery and tool contacts. If nothing works, contact a Makita authorized service center.
How to clean the UC029G saw?
Use a dry or slightly damp cloth to wipe the exterior. Clean the ventilation slots with a soft brush. Do not use solvents or corrosive products.
Where to find spare parts for the UC029G?
Spare parts (blade, carbon brushes, cover, etc.) are available from authorized Makita dealers or on the Makita official website. Always use genuine parts.
User questions about UC029G MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual UC029G - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UC029G by MAKITA.
USER MANUAL UC029G MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : UC029G
Category : Saw