GA7030SF - Grinder MAKITA - Free user manual and instructions
Find the device manual for free GA7030SF MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Angle grinder |
| Brand | Makita |
| Model | GA7030SF |
| Disc diameter | 180 mm (7") |
| Power supply | Electric (corded) |
| Rated voltage | 230 V ~ 50 Hz |
| Power consumption | 2000 W |
| No-load speed | 8500 rpm |
| Spindle thread | M14 |
| Net weight | 2.9 kg |
| Dimensions (L x W x H) | 473 x 205 x 149 mm |
| Protection rating | IP54 |
| Sound pressure level (LpA) | 85 dB(A) |
| Sound power level (LWA) | 96 dB(A) |
| Vibration (surface grinding) | 5.5 m/s² |
| Main functions | Grinding, cutting, deburring |
| Anti-restart system | Yes |
| Variable speed | No |
| Adjustable protective guard | Tool-less |
| Switch | Slide switch with lock |
| Anti-vibration handle | Adjustable side handle |
| Maintenance and cleaning | Clean ventilation slots with compressed air |
| Safety | Disc brake, overload protection, safety clutch |
| Spare parts and repairability | Accessible carbon brushes, available at authorized dealers |
Frequently Asked Questions - GA7030SF MAKITA
How to change the disc on the Makita GA7030SF?
Unplug the tool, press the spindle lock, use the supplied wrench to unscrew the retaining nut. Replace the disc, then retighten the nut, not forgetting the inner flange.
What is the power of the GA7030SF?
The GA7030SF has a power of 2000 W, allowing efficient grinding on metal surfaces.
Does the GA7030SF have variable speed?
No, this model does not have variable speed. Its no-load speed is fixed at 8500 rpm.
How to maintain the grinder's carbon brushes?
The carbon brushes are accessible via the side caps. Check their wear every 50 hours of use and replace them in pairs if necessary.
What disc diameter to use?
The maximum disc diameter is 180 mm (7 inches) with a hole of 22.23 mm. Always use discs suitable for the maximum speed of 8500 rpm.
Is the GA7030SF equipped with a disc brake?
Yes, this grinder is equipped with a disc brake that quickly stops the disc after the tool is turned off, improving safety.
How to adjust the protective guard?
The guard adjusts tool-less: loosen the knurled screw, turn the guard to the desired position, then retighten the screw.
What to do if the grinder does not start?
First check the power cord and plug. If the tool is equipped with the anti-restart system, set the switch to the off position then restart.
Can this grinder be used for cutting?
Yes, with a suitable cutting disc. Make sure to use the appropriate protective guard and follow safety instructions.
What is the noise level of the GA7030SF?
The sound pressure level is 85 dB(A) and the sound power level is 96 dB(A). Always wear hearing protection.
User questions about GA7030SF MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Grinder in PDF format for free! Find your manual GA7030SF - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GA7030SF by MAKITA.
USER MANUAL GA7030SF MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : GA7030SF
Category : Grinder