EM-650B MK2 - Mixer Omnitronic - Free user manual and instructions
Find the device manual for free EM-650B MK2 Omnitronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Mixer |
| Brand | Omnitronic |
| Model | EM-650B MK2 |
| Power Supply | 12V DC, 500mA |
| Inputs | 2x RCA, 2x 1/4" jack |
| Outputs | 1x RCA master, 1x 1/4" headphone |
| Channels | 2 stereo channels |
| Equalization | 3-band EQ per channel |
| Crossfader | Assignable, 45mm |
| Microphone Input | 1x XLR/1/4" combo with gain control |
| Headphone Output | Yes, with level control and cue |
| Frequency Response | 20 Hz - 20 kHz |
| Dimensions (W x D x H) | 200 mm x 150 mm x 50 mm |
| Weight | 0.8 kg |
| Material | Metal chassis |
| Color | Black |
| Power Indicator | Yes, LED |
| Ground Lift Switch | Yes |
| Accessories Included | Power adapter, user manual |
| Operating Temperature | 5°C to 35°C |
| Safety Certifications | CE |
| Cleaning Instructions | Use a dry, soft cloth; avoid liquids |
| Repair Policy | Only qualified personnel should attempt repairs |
Frequently Asked Questions - EM-650B MK2 Omnitronic
How do I connect turntables to the EM-650B MK2?
Connect your turntables to the RCA inputs on the rear panel. Ensure the ground wire from the turntable is connected to the ground terminal to avoid hum.
What power supply does the mixer require?
The mixer requires a 12V DC power supply with a minimum of 500mA. Use only the included adapter to avoid damage.
How do I clean the mixer?
Use a dry, soft cloth to wipe the surface. Do not use liquids, solvents, or abrasive cleaners as they may damage the controls and finish.
Why is there no sound coming from the speakers?
Check that the master volume and channel faders are up. Ensure the output cables are properly connected. Verify the power indicator is lit.
Can I connect a microphone to this mixer?
Yes, the EM-650B MK2 has a combo XLR/1/4 microphone input with gain control. Use a dynamic or condenser mic; phantom power is not provided.
How do I adjust the EQ on a channel?
Each channel has a 3-band EQ with knobs for Bass, Mid, and Treble. Turn clockwise to boost, counterclockwise to cut.
Is there a headphone output for monitoring?
Yes, the mixer has a 1/4 headphone output with a level control and cue buttons on each channel to preview tracks.
How do I assign a channel to the crossfader?
Use the crossfader assign switches located above each channel fader. Set to left or right to assign to the corresponding crossfader side.
What cables are included with the mixer?
The package includes a 12V DC power adapter and a user manual. Audio cables are not included.
Can I mount this mixer in a rack?
The EM-650B MK2 is designed for desktop use and does not include rack ears. A rackmount kit may be available separately from Omnitronic.
User questions about EM-650B MK2 Omnitronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mixer in PDF format for free! Find your manual EM-650B MK2 - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EM-650B MK2 by Omnitronic.
USER MANUAL EM-650B MK2 Omnitronic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Omnitronic
Model : EM-650B MK2
Category : Mixer