MS108TUP - Switch NETGEAR - Free user manual and instructions
Find the device manual for free MS108TUP NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 8-Port Gigabit PoE+ Switch with 2 SFP+ Uplinks |
| Model Number | MS108TUP |
| Ports | 8 x Gigabit Ethernet (RJ45) with PoE+, 2 x SFP+ (10G) |
| PoE Budget | 30W total, up to 15.4W per port |
| Switching Capacity | 20 Gbps (non-blocking) |
| Dimensions (W x D x H) | 210 x 105 x 27 mm (8.27 x 4.13 x 1.06 in) |
| Weight | 0.5 kg (1.1 lb) |
| Power Supply | External AC adapter, input 100-240V, output 48V DC, 1.25A |
| Power Consumption | 30W max (including PoE) |
| Cooling | Fanless, silent operation |
| Management | Unmanaged, plug-and-play |
| VLAN Support | 802.1Q VLAN (pass-through) |
| QoS | 802.1p priority queuing |
| Jumbo Frame Support | Up to 9K bytes |
| MAC Address Table | 8K entries |
| Mounting Options | Desktop or wall-mountable (brackets included) |
| Safety Standards | UL, CE, FCC Class B |
| Care and Cleaning | Use a dry, soft cloth. Do not use liquids or sprays. |
| Spare Parts and Repairability | No user-serviceable parts inside. Contact NETGEAR support for repairs. |
| Warranty | Limited lifetime warranty (hardware) |
Frequently Asked Questions - MS108TUP NETGEAR
How do I physically install the MS108TUP switch?
Place the switch on a flat, stable surface or mount it on a wall using the included brackets. Ensure adequate ventilation. Connect the power adapter, then connect your network devices using Ethernet cables. The switch is plug-and-play, no configuration needed.
Can I use the MS108TUP with a UPS or backup power?
Yes, you can connect the external power adapter to a UPS. The switch's power consumption is low (max 30W), so most UPS units will support it. Make sure the UPS provides a stable 100-240V AC output.
What is the maximum PoE power per port?
Each of the 8 Gigabit ports can deliver up to 15.4W of PoE+ power, with a total budget of 30W for the entire switch. This is sufficient for most IP cameras, VoIP phones, and access points.
Why are my PoE devices not powering on?
Check that the switch is powered on and the Ethernet cables are fully seated. Ensure the total power draw does not exceed the 30W budget. Also verify that your devices support PoE or PoE+ and are not damaged. If using a long cable, try a shorter one.
Does the MS108TUP support VLANs?
The MS108TUP is an unmanaged switch. It passes 802.1Q VLAN tags transparently but does not support VLAN configuration. For VLAN management, consider a smart or managed switch.
Can I connect the SFP+ ports to a 10G network?
Yes, the two SFP+ ports support 10GBASE-SR/LR transceivers or direct attach cables (DAC) for 10G connections. They are backward compatible with 1G (use appropriate optics). No configuration needed.
What should I do if the switch gets hot?
Ensure the switch is in a well-ventilated area and not stacked on other devices. The switch is fanless and operates silently, but it can become warm to the touch. If it's extremely hot, reduce the PoE load or relocate to a cooler environment.
How do I reset the MS108TUP to factory defaults?
This is an unmanaged switch, so it does not have a factory reset function. It will always start in its default state. If you need to clear any learned MAC addresses, simply power cycle the switch.
Can I mount the switch in a rack?
The MS108TUP is not rack-mountable due to its compact desktop form factor. It includes wall-mount brackets and rubber feet for desktop placement. For rack installation, you can place it on a shelf.
How long is the warranty for the MS108TUP?
NETGEAR offers a limited lifetime warranty for the hardware. This covers defects in materials and workmanship. Check NETGEAR's website for full terms and registration requirements.
User questions about MS108TUP NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual MS108TUP - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MS108TUP by NETGEAR.
USER MANUAL MS108TUP NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : MS108TUP
Category : Switch