GS752TPPv3 - Switch NETGEAR - Free user manual and instructions
Find the device manual for free GS752TPPv3 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit PoE+ Switch |
| Model | GS752TPPv3 |
| Ports | 48 x 10/100/1000 PoE+ ports, 4 x SFP+ uplink ports |
| PoE Budget | 760W total PoE budget |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 130.95 Mpps |
| Dimensions (W x D x H) | 44.0 x 26.4 x 4.3 cm (17.3 x 10.4 x 1.7 in) |
| Weight | 5.8 kg (12.8 lb) |
| Power Supply | Internal, 100-240V AC, 50-60Hz |
| Power Consumption | 850W (max with PoE load) |
| Cooling | 3 x 40mm fans, variable speed |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Management | Web GUI, CLI, SNMP v1/v2/v3, RMON, LLDP |
| VLAN Support | Up to 4096 VLANs, 802.1Q VLAN tagging |
| Security Features | 802.1X, ACL, port security, DHCP snooping, IP Source Guard |
| Quality of Service | 8 hardware queues, strict priority, WRR, DSCP |
| Mounting | Rackmountable (1U), includes rack kit |
| Regulatory Compliance | CE, FCC, RoHS, UL |
| Warranty | Lifetime warranty from NETGEAR |
| Maintenance | Keep vents clean, avoid stacking with other devices, use in well-ventilated area |
| Spare Parts / Repairability | Power supply and fan modules replaceable by qualified technician |
| Package Contents | Switch, power cord, rackmount kit, rubber feet, quick start guide |
Frequently Asked Questions - GS752TPPv3 NETGEAR
How do I reset the GS752TPPv3 to factory defaults?
Press and hold the Factory Reset button on the front panel for 10 seconds using a paperclip. The switch will reboot with default settings.
What is the maximum PoE power per port?
Each PoE+ port can deliver up to 30W. The total PoE budget is 760W, so you can power multiple devices like IP cameras, phones, or access points.
Can I manage the switch via a web browser?
Yes, the switch has a built-in web GUI. By default, it uses IP address 192.168.0.239 (or DHCP). Enter this in your browser and log in with admin/password.
How do I update the firmware?
Download the latest firmware from NETGEAR support. In the web GUI, go to Maintenance > Upgrade, choose the file, and click Apply. Do not power off during update.
What SFP+ modules are compatible?
NETGEAR recommends using AGM731F for 1000BASE-SX, AGM732F for 1000BASE-LX, and AXM761 for 10GBASE-SR+ modules. Third-party modules may work but are not guaranteed.
How to enable PoE on a port?
PoE is enabled by default on all ports. To disable or configure, go to System > PoE > Advanced > Port Configuration in the web GUI.
The switch fan is loud. Is this normal?
Yes, the fans spin at variable speeds based on temperature and load. Under heavy PoE usage or high ambient temperature, fans may run faster and be audible. Ensure proper ventilation.
Can I stack multiple GS752TPPv3 switches?
This model does not support physical stacking. However, you can manage multiple switches via NETGEAR M4300-series stacking features using uplink ports and configuration.
How to configure VLANs?
In the web GUI, go to Switching > VLAN > Advanced > VLAN Configuration. Create VLANs, assign ports with tag/untag modes, and set the PVID for each port.
What is the default login for the switch?
Default username is admin and password is password. For security, change the password immediately after first login.
User questions about GS752TPPv3 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual GS752TPPv3 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GS752TPPv3 by NETGEAR.
USER MANUAL GS752TPPv3 NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : GS752TPPv3
Category : Switch