MDW 10E4 S - Dishwasher MIDEA - Free user manual and instructions
Find the device manual for free MDW 10E4 S MIDEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Model | MDW 10E4 S |
| Brand | Midea |
| Place Settings | 10 |
| Energy Efficiency Class | A+ |
| Dimensions (H x W x D) | 845 x 600 x 600 mm |
| Weight | Approx. 45 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Annual Energy Consumption | 290 kWh |
| Annual Water Consumption | 3080 L |
| Noise Level | 49 dB(A) |
| Programs | 6 (Eco, Intensive, Normal, Quick, Glass, Rinse) |
| Drying System | Condensation drying |
| Delay Start | 1-24 hours |
| Water Connection | Cold water only |
| Salt and Rinse Aid Indicator | Yes |
| Self-cleaning Filter | Yes |
| Child Lock | Yes |
| Spare Parts Availability | For at least 10 years |
| Repairability Index | 8.0 / 10 |
Frequently Asked Questions - MDW 10E4 S MIDEA
How to clean the filter of my Midea MDW 10E4 S dishwasher?
Turn off the dishwasher and remove the lower rack. Twist the filter assembly counterclockwise and lift it out. Rinse under running water, scrub with a soft brush if needed, then reassemble. Clean monthly for best performance.
What should I do if the dishwasher doesn't start?
Check that the door is closed properly and latched. Ensure the power cord is plugged in and the circuit breaker is on. Also verify the water supply is turned on. If still not starting, try a reset by unplugging for 30 seconds.
Why is there water left at the bottom after a cycle?
A small amount of water is normal to keep the seals moist. If more than 1 cup, check the drain hose for kinks or clogs, and clean the filter. Also ensure the dishwasher is level.
How to use the delay start feature?
Press the Delay button repeatedly to set desired hours (1-24). The display will show the delay time. Close the door and press Start. The dishwasher will begin after the set delay.
Which detergent should I use?
Use either powder, gel, or tablet detergents designed for dishwashers. For hard water, add rinse aid and salt. Avoid regular dish soap as it can cause excessive suds.
How to adjust the salt and rinse aid settings?
Open the salt cap and fill with dishwasher salt. For rinse aid, open the dispenser and pour until filled. Adjust the setting based on water hardness: higher number for harder water. Refer to the manual for exact steps.
What does the 'Eco' program do?
The Eco program uses lower temperature and less water, saving energy. It takes longer but is suitable for normally soiled dishes. Ideal for daily use to reduce environmental impact.
How to install the dishwasher?
Place the dishwasher on a level floor. Connect the water inlet hose to a cold water supply. Attach the drain hose to a drain pipe or sink trap. Plug into a grounded outlet. Level the feet using a spirit level.
Why are dishes not drying properly?
Ensure rinse aid is filled, as it helps water sheet off dishes. Use the 'Extra Dry' option if available. Avoid overloading and let dishes cool before unloading. Plastic items may need hand drying.
Where can I find the user manual for MDW 10E4 S?
The manual is available for free download at notice-facile.com in PDF format. You can also request a translated version by email. Visit the product page for direct access.
User questions about MDW 10E4 S MIDEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual MDW 10E4 S - MIDEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MDW 10E4 S by MIDEA.
USER MANUAL MDW 10E4 S MIDEA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MIDEA
Model : MDW 10E4 S
Category : Dishwasher