FlexNetwork 5130 HI - Switch HP - Free user manual and instructions
Find the device manual for free FlexNetwork 5130 HI HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Ethernet Switch |
| Model Series | HP FlexNetwork 5130 HI |
| Port Configuration | Up to 48 Gigabit Ethernet ports (PoE+ models available) |
| Uplink Ports | 4 x 10 Gigabit SFP+ ports |
| Switching Capacity | 176 Gbps (for 48-port model) |
| Dimensions (W x D x H) | 44.0 x 32.0 x 4.4 cm (1U) |
| Weight | Approximately 4.5 kg |
| Power Supply | Internal AC 100-240V, 50/60Hz, max 60W (non-PoE) or 480W (PoE+) |
| PoE Budget | Up to 370W (on PoE+ models) |
| Layer Features | Layer 2 switching, static routing, RIP, OSPF, VRRP |
| VLAN Support | IEEE 802.1Q, up to 4094 VLANs |
| Quality of Service (QoS) | 8 priority queues, traffic shaping, policing |
| Security Features | ACL, 802.1X, MAC authentication, DHCP snooping, IP Source Guard |
| Stacking | Up to 9 units per stack via dedicated stacking ports |
| Management | SNMP, CLI, Web GUI, HP Intelligent Management Center (IMC) |
| Cooling | Internal fans with smart fan control |
| Operating Temperature | 0°C to 45°C |
| MTBF | >500,000 hours |
| Warranty | Limited lifetime warranty |
Frequently Asked Questions - FlexNetwork 5130 HI HP
What is the HP FlexNetwork 5130 HI series?
The HP FlexNetwork 5130 HI is a series of managed Gigabit Ethernet switches designed for enterprise edge and branch office deployments. It offers Layer 3 routing, PoE+ options, and stacking capabilities.
How many ports does the 5130 HI switch have?
The switch is available in 24-port or 48-port Gigabit Ethernet configurations, plus 4 x 10 Gigabit SFP+ uplink ports. PoE+ models can power devices like IP phones and cameras.
Can I stack multiple 5130 HI switches?
Yes, up to 9 units can be stacked using dedicated stacking ports, providing simplified management and higher port density.
Does the 5130 HI support PoE?
Yes, PoE+ models are available. They deliver up to 370W total PoE budget, with up to 30W per port, compliant with IEEE 802.3at.
How do I configure the switch?
The switch can be configured via CLI (through console or SSH), a built-in web GUI, or by using HP IMC (Intelligent Management Center) for centralized management.
What advanced routing protocols are supported?
The switch supports static routing, RIP, OSPF, and VRRP, allowing it to function as a Layer 3 device in small to medium networks.
How do I update the firmware?
Download the latest firmware from HP's support site and upload it via TFTP, FTP, or HTTP through the web interface or CLI. Always backup the configuration before updating.
What security features does the 5130 HI have?
It includes ACLs, 802.1X, MAC authentication, DHCP snooping, IP Source Guard, and port security to protect against unauthorized access and threats.
What is the warranty for this switch?
HP offers a limited lifetime warranty on hardware with advanced replacement. Check the specific terms for your region.
How to reset the switch to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until the LEDs flash, then release. Alternatively, use the CLI command
reboot factory-default.User questions about FlexNetwork 5130 HI HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual FlexNetwork 5130 HI - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FlexNetwork 5130 HI by HP.
USER MANUAL FlexNetwork 5130 HI HP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HP
Model : FlexNetwork 5130 HI
Category : Switch