ProCurve 2610-48 - Switch HP - Free user manual and instructions
Find the device manual for free ProCurve 2610-48 HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Ethernet Switch |
| Model | HP ProCurve 2610-48 |
| Ports | 48 x 10/100/1000 Mbps RJ-45, 4 x SFP Gigabit uplinks |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 130.9 Mpps |
| Dimensions (W x D x H) | 17.3 x 10.4 x 1.7 inches (44.0 x 26.4 x 4.4 cm) |
| Weight | 8.6 lbs (3.9 kg) |
| Power Supply | Internal, 100-240 VAC, 50-60 Hz, 100W max |
| Power Consumption | 75W typical |
| Cooling | Fan(s) with variable speed |
| Operating Temperature | 32°F to 113°F (0°C to 45°C) |
| Humidity | 15% to 95% (non-condensing) |
| Management | Web GUI, CLI (SSH/Telnet), SNMP, RMON |
| VLAN Support | 802.1Q VLAN tagging, up to 256 VLANs |
| Quality of Service | 802.1p, DSCP, strict priority and WRR |
| Security Features | 802.1X, ACL, SSH, SSL, port security |
| Standards Compliance | IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x |
| Mounting | Rack-mountable (1U), wall-mountable |
| Spare Parts | Power supply, fan modules, SFP modules available |
| Repairability | Field-replaceable power supply and fans; no user-serviceable parts inside |
| Maintenance | Clean with dry cloth; keep vents free of dust |
| Safety Certifications | UL, CE, FCC Class A |
Frequently Asked Questions - ProCurve 2610-48 HP
How do I reset the HP ProCurve 2610-48 to factory defaults?
Press and hold the reset button on the front panel for 10 seconds while power is on. The switch will reboot with factory settings.
How can I access the web interface?
Connect to the switch via an Ethernet cable, set your PC IP to 192.168.1.x (x ≠ 2), then open a browser to http://192.168.1.2. Default credentials: admin (no password).
Does this switch support PoE?
No, the HP ProCurve 2610-48 is a non-PoE model. You need an external injector for PoE devices.
What is the maximum cable length for Ethernet ports?
Up to 100 meters (328 feet) for Cat5e or better cable.
Can I stack multiple 2610 switches?
No, the 2610-48 does not support stacking. You can manage them separately or use link aggregation.
How do I update the firmware?
Download the firmware from HP's website, then upload via the web interface under 'Administration -> Software Upgrade'.
What SFP modules are compatible?
HP ProCurve SFP modules (1000BASE-SX, LX, etc.) are recommended. Third-party modules may work but are not guaranteed.
Why are the link LEDs not lighting up?
Check cable connections, ensure the device is powered on, and try a different cable or port.
How to configure VLANs?
Access the web interface or CLI, create VLANs and assign ports. Use 802.1Q tagging for trunk ports.
What is the warranty period?
HP offers a limited lifetime warranty (including fans and power supply) for the ProCurve 2610 series.
User questions about ProCurve 2610-48 HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual ProCurve 2610-48 - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProCurve 2610-48 by HP.
USER MANUAL ProCurve 2610-48 HP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HP
Model : ProCurve 2610-48
Category : Switch