Aruba 3810M - Switch HP - Free user manual and instructions
Find the device manual for free Aruba 3810M HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Managed Layer 3 Gigabit Ethernet switch |
| Brand | HP (Hewlett Packard Enterprise / Aruba) |
| Model | Aruba 3810M |
| Ports | Up to 48 x 10/100/1000BASE-T Ethernet ports |
| Uplink ports | 4 x 1/10GbE SFP+ slots |
| Switching capacity | 176 Gbps |
| Forwarding rate | 134 Mbps |
| Stacking | Up to 10 units per stack |
| Layer 3 features | Static IPv4/IPv6 routing, RIP, ECMP |
| Management | CLI, Web GUI, SNMP v1/v2c/v3, RMON |
| Security | ACLs, IEEE 802.1X, RADIUS, TACACS+, SSH, SSL |
| Power supply | 100-240 VAC, 50/60 Hz |
| Power consumption | Typical 98 W, max 110 W |
| Cooling | Variable speed fan trays, front-to-back airflow |
| Dimensions (W x D x H) | 44.0 x 42.9 x 4.4 cm |
| Weight | 7.44 kg |
| Operating temperature | 0°C to 45°C (32°F to 113°F) |
| Recommended for | Enterprise campus networks, access and aggregation layers |
| Maintenance | Clean with a soft dry cloth; keep vents unobstructed |
| Safety certifications | UL, CE, FCC Part 15 Class A |
| Spare parts | Field-replaceable power supplies and fan trays |
| Warranty | Limited lifetime warranty |
Frequently Asked Questions - Aruba 3810M HP
How do I find the user manual for my HP Aruba 3810M?
You can download the free PDF manual from Notice-Facile.com. Simply click the 'Download' button on this page. The manual contains setup instructions, configuration guides, and technical specifications.
How do I reset the Aruba 3810M to factory defaults?
Press the 'Reset' button on the rear panel for 5 seconds, or use the CLI command 'erase flash' followed by 'reload' to restore factory settings.
What are the key features of the HP Aruba 3810M switch?
The Aruba 3810M is a managed Layer 3 switch with stacking capability, 10GbE uplinks, and advanced security features like ACLs and 802.1X authentication.
Does the Aruba 3810M support Power over Ethernet (PoE)?
Some models support PoE+. The 3810M comes in both PoE and non-PoE variants. Check the specific model label to confirm PoE capability.
Can I stack multiple Aruba 3810M switches?
Yes, you can stack up to 10 switches using the included stacking cables, creating a single logical unit for easier management.
How do I access the management interface?
Use the included serial console cable to connect to the console port, or assign an IP address to the management VLAN and access the web interface via HTTPS.
What are the maintenance requirements?
Keep the switch free from dust; clean the vents with a soft dry cloth. Ensure adequate airflow around the unit and avoid blocking the cooling fans.
Is the Aruba 3810M safe to use?
Yes, it complies with all applicable safety standards, including UL and CE. It is designed for use in a controlled environment like a network closet.
Can I replace the power supply or fans myself?
The 3810M has field-replaceable power supplies and fan trays that can be swapped without special tools. Always disconnect power before replacing.
What is the warranty for this switch?
HP offers a limited lifetime warranty for this product, including replacement or repair if it fails due to defects in materials or workmanship.
User questions about Aruba 3810M HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual Aruba 3810M - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Aruba 3810M by HP.